I will have a detailed report regarding the HARDI annual conference in Thursday evening’s issue. However, the news is good for those involved in the construction industries with Alan Beaulieu, Chief Economist for HARDI and co-founder of the Institute for Trend Research, proclaiming 2016 will be better than 2015 and 2017 will be even better […]
On Friday of this past week Steel Market Update (SMU) adjusted our Price Momentum Indicator from Lower to Neutral. This move is being made as we are seeing more evidence of the domestic steel mills taking a stand and either raising spot prices (especially on coated steels) or refusing to go any lower. As one […]
Mexican steelmaker, TYASA will begin construction of a Castrip facility at its Ixtaczoquitlan site near Orizaba, Veracruz, Mexico. The excess melt capacity of TYASA’s Quantum Furnace will supply the Castrip thin-strip casting process. TYASA expects the new facility to have a production capacity of 500,000 tons of thin-gauge, high-strength, sheet steel that will supply local […]
For those of you who have been steady readers and members of Steel Market Update you know that the purpose of my Final Thoughts is for me to voice some of my thoughts and opinions on a wide range of topics. I am going to use this forum today to speak about what I am […]
Even though I personally believe steel prices will probably not go too much lower from here, we still have the SMU Price Momentum Indicator pointing toward lower pricing. We are looking for signs that the slide may be about over but, we continue to see weakness on hot rolled products. We got a note from […]
At least one company is seeing better days ahead for the oil and gas industry. OCT Pipe announced it will build a one million square foot pipe mill in Norfolk, Nebraska. CEO Charley Havens, of the Rockwall, Texas based company, said the $125 million facility will break ground soon and be operational by mid-2017. OCT […]
Big River Steel and Nucor were back in court on Wednesday arguing over Nucor’s claim that legal requirements were not followed in granting an air permit to Big River Steel. The Arkansas Court of Appeals will decide if the permit was properly issued. “We’re dealing with a very motivated opponent, Nucor, who wants to stop […]
Claimants in a steel anti-trust suit that has been ongoing since 2008 will finally receive some satisfaction. Last week, a U.S. District Court judge in Illinois approved the distribution of settlement funds for 1,857 claims totaling almost $103.7 million. The settlement stems from a 2008 price fixing case involving eight steel manufacturers. Standard Iron Works […]
The nation’s highways received some much needed attention last week. The House Transportation and Infrastructure Committee on Thursday approved a bipartisan bill to provide up to $325 billion for transportation projects over the next six years. The Surface Transportation Reauthorization and Reform (STRR) Act of 2015 (H.R.3763) would authorize $261 billion for highways, $55 billion […]
Nucor third quarter earnings exceeded analyst expectations with earnings per share of $0.71 compared to estimates of $0.49. Nucor posted net income of $227.1 million, up from $124.8 million in second quarter due to a larger than forecasted LIFO credit and improved performance in the steel segment. Consolidated net sales were $4.23 billion on shipments […]
Steel earnings calls began this last week and all of them reference the downturn in the oil industry and its effect on production. Low oil prices, overcapacity, and resulting weak demand for OCTG products continues to force firms to adjust output and workforce. Vallourec Star Steel announced this week that it will begin a third […]
Flat rolled steel prices were mixed over this past week based on data reported in our survey as well as the channel checks we were able to make during these past two hectic days. We are aware of offers on hot rolled under $400 per ton but we have not reported the numbers as readily […]
We ended the month of September recognizing that not only have steel prices been falling but the Momentum behind pricing turned negative during the month. Our SMU Price Momentum Indicator is now pointing toward Lower prices to be seen in the coming month or longer. Sentiment, another Key Market Indicator, has been dropping as you […]
Flat rolled steel prices remained “flexible” over the past week. During our conversations with steel buyers (and steel mills) we learned that the best prices were being offered on tonnage tied to an actual order. One of the big issues we face as we try to develop fair and reasonable price ranges is how do […]
After zinc spot pricing peaked in May of this year at $1.10 per pound, it has been steadily moving lower, closing at $0.7363 per pound at the end of trading on Monday, September 28th. Steel Market Update has been writing about the drop in spot LME zinc (as well as aluminum which impacts Galvalume, Aluminized […]
WASHINGTON, D.C., September 24, 2015 – The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI), has launched a new website that focuses on using steel for building construction. The new site, located at www.buildusingsteel.org, provides information for engineers, architects, owners, building contractors, code officials and other construction […]
Nucor guidance for third quarter 2015 beat analyst estimates. Results are expected to be in the range of $0.45 to $0.50 per diluted share, up from $0.39 in second quarter but a decrease from 2014 Q3 earnings of $0.76 per diluted share. Nucor said margins have benefited from lower inventory costs in third quarter. The […]
As expected, the U.S. International Trade Commission (ITC) has made a preliminary determination that cold-rolled steel produced in seven foreign countries (Brazil, China, India, Japan, Russia, South Korea and UK) is causing or threatening to cause injury to the domestic steel industry. The Netherlands, which was also named in the antidumping suit, was dropped from […]
Manufacturing expanded at its slowest pace in two years, according to August data from the Institute for Supply Management (ISM). On the domestic front, consumer spending remains strong bolstered by low gas prices and job growth but manufacturing for export has suffered from ailing global economies and the strength of the US dollar. The export […]
Trade discussion at the 2015 SMU Steel Summit Conference brought a number of conflicting views. Well before the Trade Panel began their formal presentations on Tuesday, attendees at the conference heard a number of comments on imports, steel overcapacity and whether the trade cases that have been initiated will help or hurt the US steel […]
For those interested in more information on the HRC trade case, the following is a reprint of the International Trade Administration Fact Sheet on the AD/CVD investigation into imports of hot rolled steel flat products from seven countries. The US DOC did decide earlier this week to allow the HRC case to move forward. ITA […]
The flat rolled steel market appears to be in a wait and see mode. Flat rolled steel prices continue to be stable to slightly weaker than what we saw a few weeks ago. Nothing dramatic is moving market momentum in one direction or another. Here is how we are seeing the market at this time: […]
Big River Steel announced a series of leadership appointments today following the unexpected death earlier this week of CEO John Correnti. Dan Murray, a member of the board, was appointed as chairman of the board of directors. Jim Bell, construction manager at Big River Steel, was elected to the board of directors. Dave Stickler, […]
A huge hole has been made in the heart the US steel industry. Big River Steel CEO John Correnti died this morning while on an out-of-town business trip. John Correnti, 68, was no stranger to the development of steel mills. His plan to build the mini-mill in Osceola, Ark. was backed by almost 50 years […]
Big River Steel CEO John Correnti died this morning. He was found dead while on an out-of-town business trip. John Correnti was the driving force behind Big River Steel, the new flat rolled mini-mill under construction in Arkansas. Prior to Big River Steel he oversaw the construction of the SeverCorr steel mill in Columbus, Mississippi […]
The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI), today announced Rick Blume, vice president, commercial, Nucor Corporation, will succeed Dan Mull, executive vice president, sales and marketing, ArcelorMittal USA, as chairman of SMDI’s Board of Directors. “We look forward to working under Rick’s leadership to further […]
Six domestic steel mills joined together to file a hot rolled trade suit today. This is now the third such suit since the filing against corrosion resistant (galvanized & zinc-aluminum or Galvalume) on June 3rd and the cold rolled petition of a couple of weeks ago. With the HR case the mills have hit the […]
On June 3rd Nucor, US Steel, ArcelorMittal USA, AK Steel, Steel Dynamics and California Steel filed antidumping and countervailing duty petition against China, Taiwan, India, South Korea and Italy on corrosion-resistant steels. To put this into layman’s terms the domestic mills filed a dumping (AD) and CVD suit on producers of galvanized and Galvalume (zinc-aluminum) […]
Steel Market Update (SMU) received this Letter to the Editor from a steel trading company executive providing an opinion on the recent slew of antidumping trade suits on flat rolled steels: First of all congratulations to Dave Phelps for his comments. As the longtime president of AIIS he has personally seen many years of domestic […]
On June 3, 2015, six U.S. steel mills filed an antidumping and countervailing duty petition against corrosion resistant (referred to as CORE, which are coated steels such as galvanized and Galvalume products) steels from: China, Taiwan, South Korea, India and Italy. Late last week, attorneys representing Nucor Corporation, US Steel, Steel Dynamics, AK Steel , […]