The final circumvention decision on Vietnam is due tomorrow, but will not be announced to the public until Thursday. We will have a full article and comments from trade attorney Lewis Leibowitz in Thursday evening’s issue of Steel Market Update. The recent Court of Appeals case may have some impact on the Vietnam final determination. […]
Metals Service Center Institute data shows that service center shipments in March were slightly less than the seasonal norm. Daily shipments in March were down by 0.8 percent from the February result. On average since 2009, March shipments have increased by 0.3 percent; therefore, these latest numbers were seasonally slightly worse than the historical average […]
Steel Dynamics reported a very strong first quarter with record shipments in the flat rolled division and a 94 percent utilization rate, well above the domestic industry average of 76 percent. Demand and product pricing improved across SDI’s entire steel platform. Net sales totaled $2.6 billion for the quarter and net income was $228 million. […]
The U.S. Department of Commerce updated their license data for the months of March and April, and we now have data through April 17. Based on the data just released, both March and April appear poised to come in around 3.5 million net tons. The largest importers continue to be the domestic steel mills as […]
Service center shipments of carbon plate increased in March, while shipments of flat roll and tubular products declined, compared with the same month last year, according to the Metals Service Center Institute’s March Metals Activity Report. Overall, service center shipments saw an improvement in March from the prior month. U.S. service centers shipped 3.596 million […]
Steel shipments by Canadian service centers in March totaled 435,600 net tons, up 13.6 percent from February, and up 3.4 percent from March 2017, reports the Metals Service Center Institute (MSCI). This is the highest monthly shipment level seen since June 2015 when 437,000 tons were shipped from Canadian service centers. On a daily basis, […]
Have flat rolled and plate steel prices peaked? Opinions vary widely among Steel Market Update’s sources. We spent all day today working on gathering flat rolled and plate pricing information. In the process, we also collected comments from steel buyers as to whether they felt steel prices have “peaked” or if there is more room […]
Have flat rolled and plate steel prices peaked? Opinions vary widely among Steel Market Update’s sources. We spent all day on Tuesday working on gathering flat rolled and plate pricing information. In the process, we also collected comments from steel buyers as to whether they felt steel prices have “peaked” or if there is more […]
In response to the Trump administration tariffs, South Korea was the first country to agree to a quota and to restrict the amount of steel they can export out of their country to the United States. Steel Market Update’s analysis below shows the potential for the quotas to have a big impact on specific market […]
I will be traveling beginning on Tuesday afternoon as I head to Chicago to conduct one of our Steel 101 workshops. I want to take a moment to thank NLMK USA for their hospitality as we will be touring their Portage minimill on Wednesday of this week. I will not return to my office until […]
Service center shipments in February were stronger than the seasonal norm, according to Steel Market Update’s latest analysis of Metals Service Center Institute data. Daily shipments in February were 3.8 percent higher than in January. On average since 2009, February shipments have decreased by 0.4 percent; therefore, these latest numbers were seasonally better than the […]
February service center shipments of carbon flat roll, plate, and pipe and tube were all up compared with the same month last year, but down compared with the prior month, according to the Metals Service Center Institute’s February Metals Activity Report. It’s a common seasonal pattern for shipments to start the year strong in January […]
Steel shipments by Canadian service centers in February totaled 383,300 net tons, down 6.5 percent from January’s high, but up 4.8 percent from February 2017, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 19,200 tons per day in February (a 20-day month), up from 18,600 tons per day in […]
We received a question from one of our readers today asking for clarification on import market share as presented in different articles. We look at imports from both a macro view (total imports = percentage of apparent supply) as well as a more focused view (such as how large is the share of pipe and […]
NLMK USA’s fourth-quarter sales and shipments dropped 3 percent from the third quarter due to expected seasonality. Sales totaled $410 million on shipments of 550,000 metric tons. Prices in the fourth quarter were flat due to uncertainty surrounding the pending Section 232 investigation. For full-year 2017, NLMK USA sales increased 21 percent from 2016 to […]
January service center intake rose 12 percent month over month but was flat compared to the seasonal norms and was down 2.7 percent compared to January 2017 intake. Daily shipments in January were 31.1 percent higher than in December and were 4.3 percent higher than January 2017. According to Steel Market Update’s latest analysis of […]
The new year got off to a strong start for U.S. service centers, which reported over a 4 percent increase in carbon steel shipments and a 6 percent increase in carbon steel inventories in January, according to the Metals Service Center Institute’s January Metals Activity Report. Service center shipments of carbon plate saw a big […]
Steel shipments by Canadian service centers in January totaled 410,100 net tons, up 46.4 percent from December’s lull, but down 0.4 percent from January 2017, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 18,600 tons per day in January (a 22-day month), up from 14,700 tons per day in […]
The following article was written by trade attorney Lewis Leibowitz: The president has a lot of discretion regarding the nature of the import restrictions that he imposes. The Commerce recommendation gave the president three alternative recommendations: (1) across-the-board tariffs on all products from all countries (24 percent); (2) 53 percent tariffs on 12 leading countries […]
The following article was written by trade attorney Lewis Leibowitz: The president has a lot of discretion regarding the nature of the import restrictions that he imposes. The Commerce recommendation gave the president three alternative recommendations: (1) across-the-board tariffs on all products from all countries (24 percent); (2) 53 percent tariffs on 12 leading countries […]
Last week ended with a bang. Steel Market Update received an invitation to participate in a press conference as Department of Commerce Secretary Wilbur Ross told the world that the DOC had found that imports of foreign steel negatively impact the steel and aluminum industries, which are necessary in the United States for national security […]
Those who were hoping the State of the Union address would offer some indication of how President Trump will act on Section 232 were left disappointed. His speech was long on patriotism and short on specifics when it came to trade policy. The steel industry is left to speculate on whether the administration will further […]
ArcelorMittal’s NAFTA segment saw crude steel production decrease 5.2 percent to 5.6 million metric tons in the fourth quarter due to operational issues in Mexico, planned maintenance at Dofasco, and a slower U.S. market. Steel shipments declined 8.9 percent to 4.2 million metric tons, primarily driven by lower volumes in flat and long products. Sales […]
Service center shipments in December were stronger than the seasonal norm, according to Steel Market Update’s latest analysis of Metals Service Center Institute data. Daily shipments in December were 11.8 percent lower than in November. On average since 2009, December shipments have decreased by 13.1 percent; therefore, these latest numbers were seasonally better than the […]
U.S. service centers shipped 38.779 million tons of steel products in 2017, an increase of 3.8 percent compared with full-year 2016, according to the Metals Service Center Institute’s December Metals Activity Report. Shipments of carbon flat roll and plate saw single-digit increases over the prior year, while shipments of pipe and tube products saw a […]
Steel shipments by Canadian service centers in December totaled 280,100 net tons, down 29.8 percent from the previous month, and down 3.4 percent from December 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 14,700 tons per day in December (a 20-day month), down from 19,000 tons per day […]
Service center shipments in November declined by 2.5 percent, close to the normal seasonal change for this time of year, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in November were 2.5 percent lower than in October. On average since 2009, November has decreased by 2.1 percent from the […]
Steel shipments by Canadian service centers in November totaled 398,900 net tons, up 1.8 percent from the previous month, and up 0.2 percent from November 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 19,000 tons per day in November (a 21-day month), up from 18,700 tons per day […]
In theory, the nation’s highways should be safer come Monday. Dec. 18 is the deadline for trucking companies to equip their vehicles with electronic logging devices. The ELDs are meant to reduce fatigue-related accidents by preventing drivers from fudging their time behind the wheel in violation of hours-of-service restrictions. As a practical matter, there will […]
Except for a few flat rolled steel mills that have not yet completely filled their December order books, most steel producers are holding firm on steel pricing in anticipation of good demand in the first quarter. The result is we are seeing two distinct pricing markets – those who have December tons and are willing […]