Nine business days left for you to nominate a young person from your company for the 2019 SMU NexGen Leadership Award. The deadline is by the end of business on August 1, 2019. The benefits of receiving this award are huge for the person who ultimately wins. A mentorship day with SDI CEO Mark Millett, […]
Nucor reported a decline in earnings for the second quarter of 2019 due to lower shipments and pricing. A build-up of inventory before the Section 232 tariffs resulted in aggressive destocking at the end of 2018 and into 2019, which impacted order rates, along with an increase in domestic steel supply and a declining scrap […]
By CRU Principal Analyst Josh Spoores and CRU North America Analyst Ryan McKinley U.S. domestic scrap prices fell by $10 /l.ton m/m in the Great Lakes and Ohio Valley for most grades prior to the Independence Day holiday, but dealers the following week pushed back on the price decline, with some successfully securing little to […]
U.S. steel exports in May totaled 630,107 net tons (571,624 metric tons), up 4.6 percent from April, but down 26.5 percent from levels one year ago. May levels are on the high side for 2018, but low comapred to the past few years. This time last year, exports were averaging 840,000 to 860,000 tons. The […]
We saw upward price movement in flat rolled steel prices this week. Benchmark hot rolled prices now average $550 per ton, up $15 per ton over the past week. All of the other products indexed by Steel Market Update also moved higher. Here is how we see prices this week: Hot Rolled Coil: SMU price […]
Steel Market Update has moved our Price Momentum Indicator on flat rolled products from Neutral to Higher. We continue to reference plate Price Momentum at Lower. This move is being made after the domestic steel mills, led by Nucor, announced two rounds of $40 per ton price increases over the past two weeks. SMU is […]
Total rolled product imports in June were down by 20.5 percent on a three-month moving average (3MMA) basis year over year. This follows the 27.4 percent decline in May on the same basis. This early look at June’s import volume is based on Commerce Department license data (see explanation below.) This import analysis includes all […]
The analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source nation. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Demand for long products is very strong, driven by the construction industry. Demand for sheet products is declining. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and imports/export data from the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply […]
Steel price negotiations have tightened considerably as the mills have begun to hold firm in support of two $40 per ton price increases announced in the past two weeks. Note that Steel Market Update began gathering the data below on Monday, just prior to the latest mill price increase announcements on Tuesday and Wednesday. In […]
Lead times for steel delivery have moved out a bit in the past two weeks, lending support to recent mill price increases. The average lead time for hot rolled has moved up to nearly four weeks, cold rolled to nearly six weeks, and coated steels to more than six weeks. Plate lead times are bucking […]
I am carefully watching flat rolled and plate lead times, the ongoing negotiations and tone of the discussions between buyers and sellers of steel, as well as industry sentiment and how service centers are handling their spot pricing into their customers. We are seeing some signs of momentum shifting on some products (especially coated), but […]
Our pricing data was collected on Monday and Tuesday of this week prior to the new Nucor price increase announcement on flat rolled steel. We are seeing the market as stable to slightly higher. This week, especially in light of the second price announcement (combined totaling $80 per ton), we will be able to see […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Welcome back from the Fourth of July Holiday (at least here in the United States). Steel Market Update gave our employees a couple of days off as we prepare for the next big push all the way to Atlanta and the SMU Steel Summit Conference on Aug. 26-28. A few minutes after I told those […]
Last week, the domestic steel mills raised prices on hot rolled, cold rolled and coated products (galvanized, Galvalume, etc.) by approximately $40 per ton ($2.00/cwt). Since then, we have seen lead times move on hot rolled by about 1 to 1.5 weeks, according to the steel buyers canvassed yesterday and today. Cold rolled and coated […]
Steel Market Update asked steel buyers this week to respond to the following question: Do you believe a floor has been put on prices and they will rise from here? Here are some of the responses received: “A floor is possible, but I fear that if we see the expected downward move for scrap prices […]
On Oct. 8-9, 2019, Steel Market Update will conduct our next Steel 101: Introduction to Steel Making & Market Fundamentals workshop in Cincinnati, Ohio. This workshop will include a tour of the Nucor Steel Gallatin Mill. Why do companies send employees to our Steel 101 workshops? Because they receive a broader understanding of: How steel […]
This week I will be working with steel buyers (and steel mills) to see how the price increase on flat rolled is being received. As is normal when lead times are short and price announcements are made, many mills held pricing through the end of last week for those who had outstanding quotes or needed […]
We are passing through 750 executives registered for the 2019 SMU Steel Summit Conference, which will be held in Atlanta on Aug. 26-28. We continue to be on track to exceed the 912 executives we reached during last year’s conference. Our conference has become the premier steel conference in North America for many reasons: Networking: […]
There seem to be more questions than answers regarding the move by the domestic flat rolled steel mills to increase spot base pricing on hot rolled, cold rolled, galvanized and Galvalume steels. The move was taken as the low end of the benchmark hot rolled steel base pricing was dipping below $500 per ton. The […]
Flat rolled and plate steel prices tumbled again this week. The question now: Is this the last drop we will see as the domestic steel mills have stepped forward and announced price increases to the tune of $40 per ton? Base prices for benchmark hot rolled were beginning to pass through the psychological $500 per […]
The day started slow, but it seems to have picked up steam after the Nucor announcement. As expected, most of the mills have followed the Nucor lead with NLMK putting specific base prices into the market. The guidance being given in the NLMK announcement is hot rolled at a $560 per ton ($28.00/cwt) minimum base […]
One thing is certain in this crazy steel market, service centers are taking their spot prices lower and lower as each week passes. Manufacturing companies are almost unanimous in their view that flat rolled steel distributors are decreasing their spot offers. We saw 93 percent of the manufacturing companies responding to last week’s SMU flat […]
Steel price negotiations have been wide open for the past two months and there is no sign of that changing in Steel Market Update’s latest data. More than nine out of 10 steel buyers responding to SMU’s market trends questionnaire this week reported that the mills are still willing to negotiate on flat rolled and […]
The market is keeping a close eye on mill lead times, hoping for some sign they are extending and perhaps signaling a pickup in order activity at the mills. Steel Market Update’s latest numbers, which show little change in lead times, are sure to disappoint. Lead times for steel delivery are a measure of demand […]
By CRU Prices Analyst Estelle Tran Hundreds of steel executives from around the world gathered in New York City this week to hold meetings and learn about what will drive the steel markets in the second half of the year. The CRU Steel Briefing on Monday, June 17, provided attendees with our views on sheet […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]