• Skip to main content

    Market Data

    August 21, 2015

    Gas & Oil Rigs Have Bottomed in US & Are Improving in Canada

    Written by Brett Linton

    According to Baker Hughes data from August 21, 2015, the U.S rig count for the week was 885 rigs exploring for or developing oil or natural gas. This is an increase of 1 rig when compared to last week, with oil rigs up 2 to 674 rigs, gas rigs unchanged at 211 rigs, and miscellaneous rigs down 1 to 0 rigs. Compared to this time last year, the 885 count is down 1,011 rigs, with oil rigs down 890, gas rigs down 119, and miscellaneous rigs down 2.

    The decline in the drilling of new gas and oil wells is having a direct impact on the amount of line pipe, storage tanks, and OCTG that is being used by the energy sector. A good portion of these products come from hot rolled coil or plate substrate, and are reasons for both the short lead times on hot rolled and plate at North American steel producers and the falling steel prices we have seen going back to mid-2014. Prices have since stabilized for hot rolled coil but the product is having a difficult time breaking out of a very narrow trading range partially due to the weakness in the energy sector.

    Brett Linton

    Brett Linton is a digital operations analyst for Steel Market Update, where he began his career. Linton has been in the steel industry since 2010. He has held roles as a category manager and strategic insights director at Reibus before returning to SMU in 2024. He is a graduate of The University of North Georgia with a degree in Finance and Accounting. Brett can be reached at brett@steelmarketupdate.com or 724-314-0179.

    Read more from Brett Linton

    Latest in Market Data

    Final Thoughts: Do Mesabi Metallics and Hyundai-POSCO signal more foreign steel investment in US?

    Could two new steel projects signal a new direction in the marketplace? Both Mesabi Metallics’ recently announced steel facility in Iowa and the Hyundai-POSCO’s proposed mill in Louisiana are major undertakings. You don’t spitball a major steel mill and then start producing the next day. From initial concept to site selection and on up to the first melt, there is a labyrinth of permitting, planning, and construction to navigate before the first heat.

    Lead times extend deeper into 2027, some see no availability until late Feb

    Lead times for sheet and plate products continue to extend in a US steel market still in the grip of a historic supply squeeze, according to the latest SMU steel market survey data. Average lead times now extend into late January 2027, with some mills not quoting availability until mid/late February. Lead times for all sheet products except Galvalume stand at their highest point since the post-Covid demand snapback in 2021. And plate lead times have exceeded their 2021 peak, repeatedly setting new record highs in our data series over the past month. (We started collecting plate lead time data in 2018. Our sheet lead time figures go back to 2012.)

    SMU flat-rolled market survey results now available

    The results of the latest Steel Market Update (SMU) flat-rolled market survey are now available on our website to all premium members. After logging in, look under the Data tab for Market Reports, and there you will find the Flat-Rolled Survey Results section. Previous survey results are also available on that page. If you need help accessing these results, or if your company would like to have your voice heard in our future surveys, contact smu@crugroup.com.

    SMU Survey: Steel mill negotiations remain rare as buyers face tight supply

    Only 5% of steel buyers surveyed by SMU this week said mills were willing to negotiate lower prices for new spot orders, suggesting mills retain substantial pricing leverage in a tight market. The share rose two percentage points from our previous survey two weeks ago but was nine points below the mid-October reading. This week's rate is just slightly higher than our previous survey when the negotiation rate fell to 3% — its lowest level since July 2021. Negotiation rates have trended downward all year as steel prices have continued to climb.