Environment and Energy
US & Canadian Rig Counts Down 1,364 Rigs
Written by Brett Linton
October 2, 2015
According to Baker Hughes data from October 2, 2015, the U.S rig count for the week was 809 rigs exploring for or developing oil or natural gas. This is a decrease of 29 rigs when compared to last week, with oil rigs down 26 to 614 rigs, gas rigs down 2 to 195 rigs, and miscellaneous rigs down 1 to 0 rigs. Compared to this time last year, the 809 count is down 1,113 rigs, with oil rigs down 977, gas rigs down 135 and miscellaneous rigs down 1.
The decline in the drilling of new gas and oil wells is having a direct impact on the amount of line pipe, storage tanks, and OCTG that is being used by the energy sector. A good portion of these products come from hot rolled coil or plate substrate, and are reasons for both the short lead times on hot rolled and plate at North American steel producers and the falling steel prices we have seen going back to mid-2014. Prices have since stabilized for hot rolled coil but the product is having a difficult time breaking out of a very narrow trading range partially due to the weakness in the energy sector.
The situation in Canada started to show improvement over the last few months, but has recently stalled. The Canadian rig count increased by 3 to 179 rigs this past week, with oil rigs up 4 to 70 rigs and gas rigs down 1 to 109 rigs. Compared to last year the 179 count is a decrease of 251 rigs, with oil rigs down 179 and gas rigs down 72. International rigs increased by 19 to 1,137 rigs for the month of August, a decrease of 202 rigs from the same month one year ago. For a history of both the US and Canadian rig count, visit the Steel Market Update website here.
About the Rotary Rig Count
A rotary rig is one that rotates the drill pipe from the surface to either drill a new well or sidetracking an existing one. They are drilled to explore for, develop and produce oil or natural gas. The Baker Hughes Rotary Rig count includes only those rigs that are significant consumers of oilfield services and supplies.
The Baker Hughes North American Rotary Rig Count is a weekly census of the number of drilling rigs actively exploring for or developing oil or natural gas in the United States and Canada. Rigs considered active must be on location and drilling. They are considered active from the time they break ground until the time they reach their target depth.
The Baker Hughes International Rotary Rig Count is a monthly census of active drilling rigs exploring for or developing oil or natural gas outside of the United States and Canada. International rigs considered active must be drilling at least 15 days during the month. The Baker Hughes International Rotary Rig Count does not include rigs drilling in Russia or onshore China.
Brett Linton
Read more from Brett LintonLatest in Environment and Energy
Active rig counts recover in US, slip in Canada
US drill rig activity moved back up last week after drifting lower for four straight weeks. Meanwhile, Canadian counts slipped for the first time after a seven-week rally, according to the latest data from Baker Hughes.
Origami Solar keeps supply chain domestic with three US fabricators
Bend, Ore.-based Origami Solar has partnered with three US steel fabricators to prioritize a domestic supply chain for its solar frames.
Price: Blast furnaces aren’t necessary to make most advanced steels
When it comes to steel decarbonization, we do not need to compromise our climate ambition to make the types of demanding steel products needed for our 21st-century economy. Nevertheless, many of the world’s highest-emitting steel producers and their allies would have you believe that one cannot be done without the other. They are wrong. They […]
Cliffs reaches emissions goals early, sets new targets
After achieving its 2030 greenhouse gas (GHG) emissions reduction targets well ahead of schedule, Cleveland-Cliffs Inc. has set new reduction goals.
Op-Ed: Steel emissions policies have not forgotten about recycling
Why have steel emissions policies forgotten about recycling? The short answer is that they haven’t. ResponsibleSteel was recently characterized in an article featured in the SMU Executive Newsletter as advocating for steel emissions policies which “discourage recycling.” In fact, ResponsibleSteel sees recycled scrap as playing a critical role in driving steel decarbonization. Recent revisions to […]