Steel Products Prices North America
Weekly Raw Steel Production Rises Above 1.7 Million Ton Level
Written by Brett Linton
May 3, 2016
For the week ending April 30, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,711,000 net tons of raw steel, a 1.6 percent increase over the previous week and a 3.8 percent increase over the same week one year ago. The estimated capacity utilization rate is 73.2 percent, up from 72.0 percent last week and up from 69.8 percent this time last year (note that the capacity utilization rates in 2016 are based on new lower total capabilities with the removal of US Steel Fairfield from the mix.)
Estimated total raw steel produced for 2016 YTD is reported to be 30,009,000 tons, down 1.6 percent from the 30,493,000 tons produced during the same period in 2015. The average capacity utilization rate for 2016 YTD is estimated to be 71.3 percent, down from 71.5 percent for 2015 YTD.
Note that the AISI estimates capability for Q2 2016 to be 30.4 million tons versus 30.7 million tons for the same period last year and 30.4 million tons for the Q1 2016.
Week-over-week changes per district are as follows: Northeast at 204,000 tons, down 7,000 tons. Great Lakes at 614,000 tons, down 18,000 tons. Midwest at 180,000 tons, down 2,000 tons. South at 625,000 tons, up 55,000 tons. West at 88,000 tons, down 1,000 tons. Total production was 1,711,000 tons, up 27,000 tons.
About Weekly Raw Steel Production Data
The weekly raw steel production tonnage provided by the AISI is estimated. The figures are compiled from weekly production tonnage provided by 50 percent of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The monthly AISI production report provides a more detailed summary of steel production based on data supplied by companies representing over 75 percent of U.S. production capacity.
SMU Note: Below is a graphic showing the weekly raw steel production history. To use the graphs interactive capabilities, you must view it on our website. You can do this by clicking here. If you need help navigating the website or need to know your login information, contact us at info@SteelMarketUpdate.com or by calling 800-432-3475.
Brett Linton
Read more from Brett LintonLatest in Steel Products Prices North America
CRU: Longs pricing trends diverge in North, South America
Most longs prices in the US were unchanged this month, except for rebar, which declined by $1.50/cwt ($30/short ton) m/m. While end-use demand is stable, inventories are well-stocked, keeping purchases limited. Domestic availability is sufficient to meet current demand, hindering the appetite for imported material. Meanwhile, prices for scrap remained under pressure in June, with […]
Nucor cuts plate prices by $125/ton, cites ongoing competition
Nucor Corp. announced that its plate mill group would cut prices for as-rolled, discrete, and normalized plate with the opening of its August order book.
Nucor cuts HR price for fourth straight week
Nucor lowered its consumer spot price (CSP) for hot-rolled (HR) coil by another $10 per short ton (st) for the first week of July. The steelmaker said in a letter to customers on Monday that its CSP base price for the week will be $670/st for all of its sheet mills with the exception of California Steel Industries (CSI).
Cliffs sets $720/ton HR price with opening of August books
Cleveland-Cliffs on Tuesday announced its monthly hot-rolled (HR) coil price of $720 per short ton (st) with the official opening of its August order book. The rate is down from last month’s price of $800/st.
CRU: Demand weakness continues to weigh on global sheet markets
Demand has remained persistently weak across the globe for sheet steel, weighing on prices. US HR coil prices fell the furthest this week as high-volume, low-priced deals were transacted as mills looked to fill order books and competed with one another amid relative demand weakness. Meanwhile, European prices were also down due to low demand […]