Steel Markets
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/8c0a91afa0e295707acd9e3971d194f9.jpg)
December Heating and Cooling Equipment Shipments
Written by Brett Linton
February 14, 2020
December heating and cooling equipment shipments came in at 1.61 million units, up 0.6 percent from the same month one year ago, according to recent data from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). This is the second consecutive month that total shipments have increased on a year-over-year basis.
Residential and commercial storage water heater shipments rose 0.7 percent year over year to a combined 808,023 units; 788,606 units were shipped for residential use and 19,417 units for commercial use.
Shipments of warm air furnaces totaled 292,622 units in December, down 4.2 percent compared to the same month last year. This is the sixth consecutive month warm air furnace shipments have decreased on a year-over-year basis.
Central air conditioners and air-source heat pump shipments rose 3.4 percent over a year ago to 508,788 total units; 303,688 air conditioners and 205,100 heat pumps were shipped. This is the sixth consecutive month air conditioners and air-source heat pump shipments have increased on a year-over-year basis.
The full press release is available on the AHRI website here.
Below is a graph showing the history of total water heater, warm air furnace and air conditioner shipments. You will need to view the graph on our website to use it’s interactive features; you can do so by clicking here. If you need assistance with either logging in or navigating the website, contact info@SteelMarketUpdate.com.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/04/SMU_BL_headshot-V4-150x150.png)
Brett Linton
Read more from Brett LintonLatest in Steel Markets
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/GrafTech.jpg)
GrafTech’s Q2 loss widens in ‘challenging’ business environment
GrafTech cited a “challenging” part of the business cycle as its net loss widened in the second quarter.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2023/07/CRU-Logo-2023-07-21-at-4.35.41-PM.png)
CRU: Poor steel margins continue to push down raw material prices
Both iron ore and coking coal prices fell this week because of resistance from buyers. Iron ore prices have continued to fall throughout the past week, following sharp declines in steel prices in China, given no new policy announcement from the ‘Third Plenum’ meeting.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/06/canacero-logo.png)
Op-Ed: The myth of the Mexican steel surge
We have heard ominous warnings about a flood of Mexican steel threatening the US market. It's the kind of rhetoric that gets thrown around often with little regard for the facts. The reality is that the Mexican steel surge is simply not happening, and the US steel industry has consistently maintained a significant trade surplus in finished products with Mexico. In 2023 alone, this surplus exceeded $3 billion.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2023/07/CRU-Logo-2023-07-21-at-4.35.41-PM.png)
CRU: Demand weakness continues to weigh on global sheet markets
Demand has remained persistently weak across the globe for sheet steel, weighing on prices. US HR coil prices fell the furthest this week as high-volume, low-priced deals were transacted as mills looked to fill order books and competed with one another amid relative demand weakness. Meanwhile, European prices were also down due to low demand […]
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/graph_up_arrow.png)
Influx of coated products fuels recent import surge
Steel imports fell back in May from April’s recent high but remained elevated compared to the levels seen over the past year. A deeper dive into the data confirms what SMU has been hearing from sources: Coated sheet is driving the recent rise in overall import levels.