Steel Products Prices North America
Nucor Drops Discrete Plate Prices $120/Ton, CTL Sizes Flat
Written by David Schollaert
September 20, 2022
Nucor Corp. is significantly lowering plate prices effective immediately, largely impacting its November plate order book.
The Charlotte, N.C.-based steelmaker said discrete plate prices, as well as prices for normalized plate, will be $120 per ton ($6 per cwt) lower. Prices for certain cut-to-length items are unchanged from its Sept. 2 price announcement.
“We reserve the right to review and re-quote any offers that are not confirmed with either a Nucor sales acknowledgement or written acceptance by both parties,” the company said in a letter to customers on Monday, Sept. 19.
All published adders and extras will be applied, the company said.
Nucor earlier this month kept prices flat for quench-and-temper and normalized plate with the opening of its October order book. The company in July lowered prices by similar amounts with the opening of its September book.
Prices for three cut-to-length sizes—84-inches wide, 72-inches wide, and 60-inches wide—are unchanged from when the company last adjusted them on Sept. 2, Nucor said
By David Schollaert, David@SteelMarketUpdate.com
David Schollaert
Read more from David SchollaertLatest in Steel Products Prices North America
September Import Share of US Sheet and Plate Markets
Imported sheet and plate products arrived at US ports at a slower clip in September, accounting for a lower share of the domestic market for the third straight month. That’s according to a Steel Market Update analysis of import data from the US Commerce Department and domestic shipment figures from the American Iron and Steel […]
US Apparent Steel Supply Falls Further in September
US apparent steel supply eased further in September, down 8% from August to 8.29 million net tons, according to data from the US Department of Commerce and the American Iron and Steel Institute (AISI). As the lowest monthly figure since February 2021, this was a 19-month low. September supply was 10% below the average monthly rate […]
Northwest Pipe Reports Sharply Higher Q3 Results
Engineered pipe and tube producer Northwest Pipe Co. posted sharply higher profits for the third quarter ended Sept. 30. The Vancouver, Wash.-based company said the boost was driven by strong demand and increasing backlogs from its engineered pipeline systems and precast products, according to earnings data released on Tuesday, Nov. 8 All told, Northwest Pipe posted net […]
SMU Price Ranges: Flat-Rolled Steel Falls (Yet Again)
Sheet prices fell across the board again this week as the slow grind lower that we’ve seen since last spring continued to gain speed. Hot-rolled coil prices fell $30 per ton ($1.50 per cwt) week-over-week. Declines in coated products were more pronounced, with cold rolled down $55 per ton, galvanized down $35 per ton, and […]
US Steel Exports Slip 10% in September
US steel export volumes shrunk 10% from August to September, according to the latest US Commerce Department data. 723,000 net tons of steel products exited the country during the month, now the fourth-lowest monthly export rate over the past year and a half. Recall that exports levels in August were at the third-highest monthly rate […]