Steel Products

US, offshore CRC prices continue to fall
Written by David Schollaert
May 9, 2025
US cold-rolled (CR) coil prices moved lower again this week, slipping five weeks in a row now. Most offshore markets mirrored the move, ticking down as well.
As a result, the US premium over imports on a landed basis was just marginally lower week on week (w/w).
In our market check on Tuesday, May 6, US cold-rolled (CR) coil prices averaged $1,085 per short ton (st), down $15/st from the previous week. The price decline comes as tariff uncertainty continues to drag on the market, keeping buyers on the sidelines.
By the numbers
Domestic CR prices are now, theoretically, 11.3% higher than imports. That premium is down from 12.2% the previous week and well below 33.9% just before the return of new Section 232 tariffs, which took effect in March.
In dollar-per-ton terms, US CR is, on average, $81 per st more expensive than offshore product (see Figure 1) – down $9/st w/w and now more than $200/st lower with new S232 tariffs in effect.
The charts below compare CR coil prices in the US, Germany, Italy, South Korea, and Japan. The left side shows prices over the last two years, and the right side zooms in to highlight more recent trends.

Methodology
SMU calculates the theoretical price difference between domestic and imported cold-rolled (CR) steel by comparing our US CR price (FOB domestic mills) with CRU’s indices (DDP US ports) for Germany, Italy, and East Asia (Japan and South Korea). This is an estimate, as actual import costs vary.
To approximate the cost of foreign steel delivered to US ports, SMU adds $90/st to foreign prices to cover freight, handling, and trader margins. This benchmark can be adjusted based on individual shipping costs. (If you import steel and have insights on these costs, you can contact the author at david@steelmarketupdate.com.)
East Asian CR coil
As of Thursday, May 8, the CRU Asian CR price stood at $517/st, flat w/w. Factoring in a 71% anti-dumping duty (Japan, theoretical), a 25% S232 tariff, and $90/st in estimated import costs, the delivered price to the US is $1,195/st. The theoretical landed price of South Korean CR exported to the US is $736/st.
With the latest SMU CR price down $15/st to an average of $1,085/st, US-produced CR is now theoretically $110/st below Japanese imports but $349/st above South Korean imports.


Italian CR coil
Italian CR prices were $7/st lower this week to $749/st. After adding import costs and a 25% tariff, the price of Italian CR delivered to the US is, in theory, $1,027/st.
That means domestic CR is still theoretically $58/st more expensive than CR coil imported from Italy. The spread is down $7/st vs. last week, but $234/st off from about two months ago before S232 kicked in.

German CR coil
CRU’s German CR price was down $14/st vs. the previous week. After adding import costs and a 25% tariff, the delivered price of German CR is, in theory, $1,057/st.
The result: Domestic CR is theoretically $28/st more expensive than CR imported from Germany. The spread is up $3/st w/w, yet still nearly a $290/st cut since the new version of S232.

Editor’s note
We reference domestic prices as FOB the producing mill, while foreign prices are CIF the port (Houston, NOLA, Savannah, Los Angeles, Camden, etc.). Inland freight from either a domestic mill or a port is important to keep in mind when deciding where to source from. It’s also important to factor in lead times. In most market cycles, domestic steel will deliver more quickly than foreign steel. Note also that, effective March 12, 2025, undiluted Section 232 tariffs were reinstated on steel imports. Therefore, the Japan, South Korea, German, and Italian price comparisons in this analysis now include a 25% tariff.

David Schollaert
Read more from David SchollaertLatest in Steel Products

SMU Community Chat: Zekelman calls for more support for steel consumers
“Unless the administration actually gets serious about levelling the playing field… for consumers of steel, then everything they've done on the steel side is useless."

SMU Community Chat replay now available
The latest SMU Community Chat webinar reply is now available on our website to all members. After logging in at steelmarketupdate.com, visit the community tab and look under the “previous webinars” section of the dropdown menu. All past Community Chat webinars are also available under that selection. If you need help accessing the webinar replay, or if your company […]

Nucor maintains plate prices, again
Nucor aims to keep plate prices flat again with the opening of its July order book.

Asian HR remains much cheaper than US, EU product
Domestic hot-rolled (HR) coil prices were flat this week after declining seven of the last nine weeks. Offshore prices have also eroded in recent weeks, though not nearly as significantly as in the US.

Galv buyers less optimistic about short-term market
“It was a little more of a seller's market as contractors seemed to be protecting themselves against a potential run up in prices," one buyer said.