Category: Prices

Sheet prices were again mixed this week – all seemed to highlight the momentum shift seen over the past two weeks.

Nucor is holding its hot-rolled (HR) coil consumer spot price (CSP) flat this week.

Steel sheet prices in many regions of the world were steady week over week in the week ended April 17.

Foreign cold-rolled (CR) coil remains less expensive than domestic product, according to SMU’s latest check of the market.

It has been a crazy 2024 so far for hot-rolled coil (HRC) futures!!! 

US hot-rolled (HR) coil has become gradually more expensive than offshore hot band in recent weeks, as stateside prices have stabilized while imports moved lower.

Sheet prices varied this week. While hot-rolled (HR) coil pricing was largely flat, cold-rolled (CR) coil and tandem product pricing eased slightly reflecting the momentum shift seen last week for HR coil. SMU’s average HR coil price was flat from last week at $835 per short ton (st) – potentially emphasizing the tension between competing […]

Nucor said its spot hot-rolled (HR) coil price for the week of April 15 will be $835 per short ton (st), up $5/st from last week. The Charlotte, N.C.-based steelmaker said the new price would be effective immediately in a letter to customers on Monday morning. The exception again is California Steel Industries (CSI), Nucor’s […]

US hot-rolled (HR) coil has become increasingly more expensive than offshore hot band as stateside prices have moved higher at a sharper pace vs. imports.

Over the last several years, I have noticed widening spreads between #1 Heavy Melting Steel (ISRI 201) and Shredded (ISRI 210,211), as well as Plate & Structural (ISRI 232).

Nucor made waves in the sheet market when it announced on Friday that it would begin publishing a weekly hot-rolled (HR) coil price. The Charlotte, N.C.-based steelmaker arguably made even bigger waves on Monday when it posted its first weekly HR number: $830 per short ton. That’s $70/st lower than the $900/st HR price Cliffs announced in late March. It’s also lower than prices in the mid-$800s that other mills were (less publicly) seeking.

Sheet prices saw a slight momentum shift this week after consecutive gains in the prior two weeks. Plate edged lower on greater competition off easing demand, according to our latest check of the steel market.

Nucor said its new weekly hot-rolled coil spot price is not meant as a substitute for any current price indices.

Nucor said its spot hot-rolled (HR) coil price this week will be $830 per short ton (st).

April scrap prices came in sideways in the US, sources told SMU.

It has been six weeks since Flack Global Metals wrote our last SMU column, and if you simply look at the futures curve from then (blue) until now (white), you could argue that very little has changed.

Low manufacturing activity and higher interest rates took a toll on Radius Recycling’s profits during the Oregon-based company’s most recent quarter. Radius reported a net loss of $34 million, or $1.19 per share, during its fiscal second quarter. In the previous quarter, Radius saw a net loss of $18 million, or 64 cents per share.

Nucor plans to publish a weekly spot price for hot-rolled (HR) coil beginning on Monday, April 8, according to a press release and letters to customers. The Charlotte, N.C.-based steelmaker said its published HR price would be derived from “both quantitative and qualitative data” in the letter to customers on Thursday, April 4.

Several large buyers in the North came into the market on a sideways basis from prices paid in March. The development comes after recent speculation about what prices US-based steelmakers would pay for scrap for April shipments.

On the eve of the April ferrous scrap buy, there is no firm consensus on the market’s direction. The safe predictions are “soft” sideways to “strong” sideways. That may mean down $10 per gross ton (gt) to up $10/gt.

Jack Marshall, a beloved member of the Crunch Risk team, has decided to retire. Jack started his career on the CME floor in 1983, working as a clerk. He then became part of the Chicago origination/trading team in forex at Bank of America, where he worked for 23 years.

There is growing hope that the US scrap market has bottomed, according to industry sources. The steep price declines in March may have ushered in a floor because dealers say their stocks are a bit depleted. Their concern: that the flow of obsoletes could be cut severely with any further drop in prices. Is this wishful thinking, or do the fundamentals support the prediction of a market bottom? Let’s take a look!

Nucor intends to keep plate prices unchanged with the open of its May order book, according to a letter to customers dated Thursday, March 28. The Charlotte, N.C.-based steelmaker said the announcement would be effective with new orders received on Friday, March 29.

US hot-rolled coil and offshore hot band moved further away from parity this week as stateside prices have begun to move higher in response to mill increases.

Numerous mid-sized export yards in California and in Baja Mexico had little to no inventory on the ground last week because most had sold forward in the falling March market. Looking to secure their margins, they dropped prices across the scale. That resulted in lower-than-normal flows. “I’m sold out through mid-April and even longer if the flow doesn’t pick up” one yard owner said. That turned out to be the position of numerous West Coast suppliers.

Galvanized buyers reported solid demand and balanced inventories this week and were anticipating the sheet price increase announced by Cleveland-Cliffs on Wednesday.

Sheet prices reversed course and moved higher this week, while plate priced remained flat, according to our latest canvas of the market.

Prices for pig iron in Brazil have increased despite efforts by US-based buyers to lower them. 

Foreign cold-rolled (CR) coil remains notably less expensive than domestic product even with repeated tag declines across all regions, according to SMU’s latest check of the market.

As the month of March goes into the second half, the scrap community is trying to cope with the large drop in ferrous scrap earlier this month.