The steel industry’s ecommerce platforms have drawn a lot of interest lately from buyers searching for material and sellers searching for the highest price. John Armstrong, president and CEO of Reibus, said his online platform is thriving despite—or perhaps because of—the tight market conditions. “The volatility drives buyers to look for new solutions. Our tool […]
Orders for durable goods rose for an eighth month in December, gaining 0.2 percent after an upward revision to 1.2 percent in November. Growth was below economists’ projections of 0.8 percent and the smallest increase since August. The pullback in momentum was primarily due to a sharp drop in aircraft orders. Excluding the volatile category […]
U.S. industrial production, manufacturing and durable goods orders through December continued to show improvement from the coronavirus pandemic downturn. The health of the manufacturing economy has a direct bearing on the health of the steel industry. The Industrial Production Index The IP index is a gauge of output from factories, mines and utilities. Industrial production […]
Manufacturing firms in 2021 will see a continuation of the growth trend that began last June, says a new forecast by the Institute for Supply Management. The December 2020 Semiannual Economic Forecast offers an optimistic outlook for revenues, operating capacity, capital expenditures and employment levels in 2021. “Manufacturing’s purchasing and supply executives expect to see strong […]
By CRU Principal Economist Alex Tuckett and Chief Economist Jumana Saleheen from CRU’s Global Economic Outlook This month has brought good and bad news. On the one hand, vaccines are being rolled out, and further U.S. fiscal stimulus looks increasingly likely. On the other hand, the growing severity of the second wave of COVID-19 means […]
The upward trend in mill shipments and supply of sheet products continues, although the pace fell off as the fourth quarter carried on. After reaching bottom in June, as a result of the global pandemic, mill shipments and supply maintained a slow but steady upward trajectory through November 2020. This analysis is based on steel […]
This report is an analysis of Bureau of Labor Statistics (BLS) data and is intended to provide subscribers with a view of the competitive positions of sheet steel, aluminum, plastic and wood. The analysis includes some downstream products and a comparison of truck and rail transportation. On Jan. 15, the BLS released its series of […]
The Biden administration could act fast on a big infrastructure bill if the Senate is quick to approve the president-elect’s Cabinet, the head of the American Iron and Steel Institute (AISI) said. “By sometime this spring, I think we could have a major infrastructure bill done,” AISI President and Chief Executive Officer Kevin Dempsey said […]
The Empire State Manufacturing Survey indicated sluggish growth in January. The general business index slipped to 3.5 from 4.9 in December. Economists were expecting the index to come in at 6.0. The index for new orders rose three points to 6.6 while the shipments index dropped to 7.3 from 12.1 in the previous month, indicating […]
By CRU Chief Economist Jumana Saleheen and CRU Principal Economist Alex Tuckett, from CRU’s Steelmaking Raw Materials Monitor After years in which inflation has been low in major economies, financial markets are becoming increasingly concerned about high future inflation. In this Special Feature, we examine a number of factors which could be inflationary over the […]
By CRU Chief Economist Jumana Saleheen and CRU Economist Yingrui Wang On March 5, the Chinese government announced its macroeconomic targets for 2021 and beyond. It reaffirmed our broad view that China is keen to withdraw policy support gradually and deliver a steady economic slowdown over the next five years. What we learned is that […]
Economic activity rose modestly for most Federal Districts as 2020 came to a welcome end. Two Districts reported flat activity while two others noted a decline, said the Federal Reserve its January 2021 Beige Book. The recent surge in COVID-19 cases resulted in another decline for retail sales and leisure and hospitality services. More Americans […]
The U.S. electric-arc furnace steelmaking industry is eager to work with the administration of President-elect Joe Biden to craft better trade, infrastructure and manufacturing policies, the head of the Steel Manufacturers Association said. And those efforts could be fruitful given Biden’s moderate positions on those issues and the moderation that will be necessary to effectively […]
U.S. consumer confidence continues to fall as global pandemic fatigue sets in and genuine relief still seems far away. Despite a slight correction and stability throughout the summer months, the composite value of consumer confidence, reported by The Conference Board, has now slipped repeatedly during the fourth quarter from 101.8 in September to 88.8 in […]
The economy lost 140,000 jobs in December after seeing repeated gains month on month since May, reported the Bureau of Labor Statistics (BLS). The pace of job additions had slowed significantly in November compared to October when additions were 245,000 and 638,000, respectively. The change in direction comes as the market enters the winter months and […]
Employment gains have slowed each month since June, and after a marginal increase in November, December employment numbers retracted for the first time since March, according to Steel Market Update’s latest analysis of the U.S. Bureau of Labor Statistics (BLS) data. The net change in employed persons in December was a negative 140,000, following a disappointing […]
Overall, steel product shipments continued to improve through November, reporting an increase for the seventh consecutive month. Despite the gains, the improvement continues at a slower pace than the overall manufacturing economy. The market is still working to recover from the initial effects of the Covid-19 shutdowns back in April. As a result, despite the steady […]
2021 will be a year of hope for recovery after the coronavirus pandemic left its mark on the world in 2020. Monitoring the speed and nature of the recovery will be vital to understanding all markets. Drawing on conversations between market experts and people across commodity value chains, CRU expects interest in three topics to […]
The following article on the hot rolled coil (HRC), scrap and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot Rolled HR and scrap prices had a very strong move in the last month. All eyes focus on lead times for […]
Global manufacturing ended 2020 with growth rates for production and new orders among the strongest of the past decade. The J.P. Morgan Global Manufacturing PMI posted 53.8, unchanged from November’s 33-month high. Output continued to expand in December, although at a slightly slower pace, and was led by growth in Germany, Brazil and India. New […]
Strong demand and tight supply pushed steel prices upwards throughout December, with hot rolled prices nearing quadruple digits as 2020 came to a close. Steel Market Update’s hot rolled price index reached $985 per ton by the end of December, up $180 per ton or 22 percent from the beginning of the month. The SMU […]
The U.S. manufacturing sector expanded again in December, gaining 3.2 points to register a PMI of 60.7 percent in the December 2020 Manufacturing ISM Report on Business. “The manufacturing economy continued its recovery in December,” said Timothy Fiore, chairman of the Institute for Supply Management Manufacturing Business Survey Committee. “Survey Committee members reported that their […]
The Chicago Business Barometer edged up 1.3 points in December to 59.5, reports MNI Indicators. The gain came as a welcome surprise as employment levels, although still in contraction, made notable improvement last month. The production index gained 1.1 points while demand slipped 2.0 points. Order backlogs grew for a second month, gaining 3.6 points. […]
Orders for durable goods rose for the seventh month in November, edging up 0.9 percent after a 1.8 percent gain in October. Transportation equipment orders gained 1.9 percent and included a 2.4 percent rebound in orders for motor vehicles and parts, according to the latest Census data. Core capital goods, orders excluding defense and aircraft, […]
By CRU Senior Cost Economist Ross Cunningham, from CRU’s Steelmaking Raw Materials Monitor Global CO2 emissions have been rising since the start of the industrial revolution. This has caused rising global temperatures and severe weather events such as wildfires, flooding and drought. In 2015 the United Nations framework convention on climate change put together the Paris […]
The U.S. dollar weakened against 15 of the 16 steel and raw materials trading nation currencies in both the last 30 and 90 days. The biggest changes in the last 90 days were in the value of the South African rand, up 12.2 percent, the Korean won and the Mexican peso, both up by 6.0 […]
The United States experienced the least growth among the 10 major steel-producing nations in the three months through November, according to data from the Organization for Economic Cooperation and Development (OECD). Figure 1 shows annualized monthly global steel production on a three-month moving average (3MMA) basis and capacity utilization since January 2000 based on capacity […]
This report is an analysis of Bureau of Labor Statistics data and is intended to provide subscribers with a view of the competitive position of sheet steel, aluminum, plastic and wood. The analysis includes some downstream products and a comparison of truck and rail transportation. On Dec. 10, the BLS released its series of Producer […]
Metalforming firms are expecting business conditions and order activity to remain unchanged during the next three months, said the Precision Metalforming Association in its December 2020 Business Conditions Report. “Metalforming manufacturers are showing resiliency during the COVID-19 pandemic, but finding workers continues to be a challenge despite the high unemployment rate,” said PMA President David […]
President-elect Joe Biden will hit the ground running due to his past experience in Washington and the depth of experience of his Cabinet choices, said Omar Nashashibi, founding partner of the Franklin Partnership, during a FABTECH webinar last week. Expect to see a flurry of executive orders and memorandums from the new executive office regarding […]