The Steel Market Update Price MoMo Index for flat rolled steel in the U.S remained positive this week, but only slightly so, and is currently in its 14th consecutive week of being in positive territory. MoMo, a trailing indicator, is based upon the current hot rolled coil (HRC) price weighed against the previous 12-week average […]
Flat rolled steel prices began to slip this week as some short term weakness was seen in domestic mill order books and lead times. Benchmark hot rolled is perhaps the weakest product based on our discussions with buyers around the eastern half of the United States and into Canada. The biggest reason behind the slippage […]
November prepainted flat rolled imports decreased over October, especially on galvanized and Galvalume products. The four prepainted products tracked by SMU fell a combined 21,941 net tons (NT) or 49.7 percent over the previous month. Compared to the same month one year ago, prepainted imports were down 30.2 percent on average for select products. As […]
For the week ending January 11, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,830,000 net tons (NT) of raw steel, a 0.4 percent increase over the previous week but a 0.1 percent decrease over the same week one year ago. The estimated capacity utilization rate is 76.4 […]
Apparent steel supply for November was 8,592,683 net tons (NT), a 1.46 percent increase compared to the same month one year ago. This was due to a slight increase in domestic shipments and a minor decrease in exports. The net trade balance from the difference between imports and exports was a surplus of 1,653,365 net […]
November steel export data indicates total US steel exports were 939,185 net tons (NT) for the month of November 2013, the lowest levels seen since December 2010 when exports were 934,471 NT. Total November steel trade to countries outside of the United States is down 17.1 percent compared to October levels and down 6.0 percent […]
According to Baker Hughes data from January 10, 2014, the U.S rig count for this week is 1,754 rigs exploring for or developing oil or natural gas. This count is an increase of 3 rigs when compared to last week, with oil rigs up 15 to 1,393 rigs, gas rigs down 15 to 357 rigs, […]
Final November trade data shows that the United States received a total of 2,592,549 net tons of steel for the month. This is a decrease of 16.4 percent compared to the 3,101,063 NT imported in October. It is also a decrease from November 2012 tonnage by 4.8 percent. December license data figures are estimated at […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained positive this week for the 13th week in a row after 4 consecutive weeks of being in negative territory. MoMo, a trailing indicator, is based upon the current hot rolled coil (HRC) price weighed against the previous 12-week average spot […]
The American Iron and Steel Institute (AISI) released data earlier this week for net shipments of steel mill products for the month of November. Total shipments for the month were reported to be 7,604,428 net tons (NT), down 8.2 percent from October tonnage but up 2.8 percent from November 2012. YTD tonnage through November was […]
For the week ending January 4, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,822,000 net tons of raw steel, a 2.8 percent increase over the previous week and a 0.6 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.1 percent, […]
The U.S. Department of Commerce recently released revised import statistics for the month of November and December. Total preliminary imports for November are 2,584,176 net tons (NT), down 16.7 percent compared to October import figures. November imports are below both the 3 month-moving-average (3MMA) and 12 month-moving-average (12MMA) calculated through October. December imports, based on […]
The American Iron & Steel Institute (AISI) reported their final raw steel production numbers for the month of November 2013. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]
According to Baker Hughes data from January 3rd, 2014, the U.S rig count for this week is 1,751 rigs exploring for or developing oil or natural gas. This count is a decrease of 6 rigs when compared to last week, with oil rigs down 4 to 1,378 rigs, gas rigs down 2 to 372 rigs, […]
Chinese iron ore imports rose to 77,840,000 metric tons (MT) in November, a 14.8 percent increase over October tonnage. Compared to the same month one year ago, November imports were up 18.3 percent. Year-to-date (YTD) iron ore imports stood at 746,100,000 MT for the first 11 months of 2013. Steel scrap imports to China were […]
For the week ending December 28, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,773,000 net tons of raw steel. This is a decrease in production in comparison to the first week of December when raw steel production was 1,829,000 NT (the highest production rate for the month). […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained positive this week for the 12th week in a row after four consecutive weeks of being in negative territory. MoMo, a trailing indicator, is based upon the current hot rolled coil (HRC) price weighed against the previous 12-week average spot […]
For the week ending December 28, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,773,000 net tons of raw steel, a 2.3 percent increase over the previous week but a 0.7 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.0 percent, […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained positive this week for the 11th week in a row after 4 consecutive weeks of being in negative territory. MoMo, a trailing indicator, is based upon the current hot rolled coil (HRC) price weighed against the previous 12-week average spot […]
According to Baker Hughes data from December 27, 2013, the U.S rig count for this week is 1,757 rigs exploring for or developing oil or natural gas. This count is a decrease of 11 rigs when compared to last week, with oil rigs down 13 to 1,382 rigs, gas rigs up 2 to 374 rigs, […]
For the week ending December 21, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,733,000 net tons of raw steel, a 4.7 percent decrease over the previous week and a 2.9 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.3 percent, […]
According to Baker Hughes data from December 20th, 2013, the U.S rig count for this week is 1,768 rigs exploring for or developing oil or natural gas. This count is a decrease of 14 rigs when compared to last week, with oil rigs down 16 to 1,395 rigs, gas rigs up 3 to 372 rigs, […]
The American Institute of Architects (AIA) reported the results of their analysis of member companies demand for design services. The resulting Architecture Billings Index (ABI) is one of the most watched indices associated with residential and commercial construction by the steel community. A tremendous amount of flat rolled steel as well as long products are […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. remained positive this week for the 10th week in a row after 4 consecutive weeks of being in negative territory. MoMo, a trailing indicator, is based upon the current hot rolled coil (HRC) price weighed against the previous 12-week average spot […]
Canadian shipments for all steel products in the month of November were 473,000 net tons, a decrease of 11.1 percent from the month before and a decrease of 4.5 percent from November 2012. Inventories at the end of the month stood at 1,256,700 tons, an increase of 0.9 percent from last month but a decrease […]
For the week ending December 14, 2013, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,818,000 net tons of raw steel, a 0.6 percent decrease over the previous week but a 1.8 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.9 percent, […]
According to Baker Hughes data from December 13th, 2013, the U.S rig count for this week is 1,782 rigs exploring for or developing oil or natural gas. This count is an increase of 7 rigs when compared to last week, with oil rigs up 14 to 1,411 rigs, gas rigs down 6 to 369 rigs, […]
The AHRI released shipment data for heating and cooling equipment for the month of October 2013. This data is important to those in the steel industry as the equipment is made out of flat rolled steels. The data is also an important economic indicator for residential construction and growth. Residential Storage Water Heaters U.S. shipments […]
Apparent steel supply for October was 9,445,160 net tons, a 12.63 percent increase compared to the same month one year ago. This was due to a large increase in domestic shipments and total imports, and a decrease in exports. The net trade balance from the difference between imports and exports was a surplus of imports […]
October ferrous scrap exports totaled 1,451,844 net tons (1,317,092 metric tons) with Turkey, Korea, Taiwan, China, and Mexico being the top five countries where scrap was sent. These countries accounted for over 74.1 percent of all scrap exports. Of the higher ranking countries in the table below, there was month-over-month increase in ferrous scrap exports […]