As of mid-November, steel prices appear to be moving upward following price increases announced by the major flat rolled and plate mills. How high and for how long is the subject of much debate and speculation. The market is clearly split between those in a buying mode in anticipation of sustained higher prices and those […]
Change and growth, both personal and professional, were the dominant topics at the 2019 Annual Conference of the Association of Women in the Metal Industries, held in San Antonio Nov. 6-9. Beginning with a workshop by Asbury Group CEO Kailei Carr—”Unveil Your Most Powerful Self”—and ending with Anne Phelon, CEO at Merrett Davies International—”Moving from […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
By Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor Global sheet prices remain in a downtrend for November, though are starting to recover in some markets. Overall, CRU’s Global Flat Products Price Indicator (CRUspi flats) fell 3.3 percent m/m in November to 137.7, the lowest level recorded since October 2016. This indicator of global […]
ArcelorMittal USA will shut down its blast furnace #3 at Indiana Harbor West. The furnace has reached the end of its current operational life and will be taken down in a safe and orderly fashion, said a spokesperson for the company. The furnace could be restarted in the future “if customer demand merits the necessary […]
ArcelorMittal reported a third-quarter net loss of $539 million—its second quarterly loss in a row as the global steel and mining company faced lower shipments and weak steel prices in markets all over the world. “As anticipated, we continued to face tough market conditions in the third quarter, characterized by low steel prices coupled with […]
The domestic steel mills announced new $40 per ton ($2.00/cwt) price increases on flat rolled this past week. This is the second price increase on flat rolled over the past two months. The domestic mills, led by ArcelorMittal USA, announced $40 per ton spot base price increases on Oct. 24-25 and were able to collect […]
Steel Market Update was working on an article predicting a flat rolled price increase very soon when we received notice about 5 p.m. ET this evening that the Nucor Sheet Mill Group was raising base prices of flat rolled by a minimum of $40 per ton, effective immediately. This is the second flat rolled price […]
Despite the Oct. 28 plate price increase announcement out of Evraz ($40/ton), plate prices continue to be under pressure. [Please note: This article was completed just prior to the Nucor $40 price increase announcement, which was made on plate products at 4 p.m. this afternoon.] A large plate buyer told SMU they had just received […]
ArcelorMittal is withdrawing from a deal to acquire the troubled Italian steel plant Ilva after the government removed legal protection for the company while it brings the mill up to environmental standards. On Monday, AM InvestCo Italy sent a notice to Ilva’s commissioners that it will withdraw from or terminate the agreement. Ruling political party […]
AK Steel eked out a net income of $2.8 million in the third quarter, down from $66.8 million in Q2 and $67.2 million in Q3 2018. Included in net income was a $15.3 million mark-to-market loss from iron ore derivatives. Net sales of $1.5 billion fell 12 percent year-over-year and 9 percent from the second […]
Four more mills–Nucor, U.S. Steel, USS-Posco and Algoma Steel–raised prices on their flat rolled products by $40 per ton ($2/cwt) Friday, following on similar announcements by ArcelorMittal and NLMK USA the day before. The mills are hoping to reverse the slide that has taken the benchmark price of hot rolled steel from more than $700 […]
Nucor and U.S. Steel raised prices on their flat rolled products by $40 per ton ($2/cwt) today, following on similar announcements by ArcelorMittal and NLMK USA yesterday. The mills are hoping to reverse the slide that has taken the benchmark price of hot rolled steel from more than $700 per ton to less than $500 […]
Speculation that steel prices were near the bottom and the mills were contemplating a price increase has proven out as ArcelorMittal and NLMK USA both announced flat rolled price increases today of $40 per ton. Other mills are expected to follow. ArcelorMittal informed its commercial team today that it is raising base prices on light […]
ArcelorMittal USA announced a $40 per ton ($2.00/cwt) price increase today, which is in line with our expectations that an increase was inevitable based on comments from service centers and manufacturing companies responding to our flat rolled steel market trends questionnaires over the past few weeks. By the end of the day, NLMK USA had […]
Speculation that steel prices were near the bottom and the mills were contemplating a price increase has proven out as ArcelorMittal became the first to hike flat rolled prices today by $40 per ton. Other mills are expected to follow. ArcelorMittal informed its commercial team today that it is raising base prices on light flat […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
Over the past couple of weeks, Steel Market Update has been suggesting flat rolled steel prices were at a bottom and the domestic steel mills would soon announce price increases. Today, ArcelorMittal USA began advising customers of their intention to raise prices by $40 per ton. By the end of the workday, NLMK USA had […]
By CRU Analyst Jordan Permain It is imperative for carbon steel producers to have secure supply of metallurgical coke to ensure stable and efficient operation of their blast furnaces (BF). Steelmakers also benefit from using coke with consistent technical specifications, namely CSR and ash content in their BFs. For these reasons alone it is prudent […]
Liberty Steel USA will get a new $25 million electric arc furnace at its Georgetown, S.C., rolling mill next year. Georgetown’s aging EAF has an annual capacity of 500,000 metric tons, but actual production has fallen far short of that amount. “We have a very efficient rolling mill at Georgetown and we now want to […]
Worthington Industries has acquired Heidtman Steel Products’ pickling and slitting facility in Cleveland. As part of the sale, the Cleveland operation under Worthington will continue to service Heidtman customers through a toll processing agreement. “Heidtman’s Cleveland operation is a great addition to our steel business, further expanding our value-added steel processing capacity,” said Worthington Industries […]
Steel Market Update reported in the last issue on the sudden closing of Bayou Seel in Louisiana, and a few readers took issue with some comments in the article (Trade War Contributes to Bayou Steel’s Demise). In statements that were widely reported, Gov. John Bel Edwards blamed the closure on the Trump administration tariffs. The […]
I received numerous notes regarding a hot strip mill outage at AMNS Calvert, which began last week. Based on reports from steel buyers, the HSM outage was expected to last for about one week. We asked ArcelorMittal for information and confirmation yesterday, but they failed to respond. Today, we received information that the Calvert lead […]
By CRU Analyst Ryan Smith Operating costs for flat-rolled minimill producers have dropped in 2019 as weaker steel markets have pulled down metallics prices. This has meant that operating costs for minimills are now in line with integrated producers in the USA. However, the current cost level is not expected to be maintained. (See related […]
A number of maintenance outages are scheduled at U.S. steel mills in the coming months with the majority to occur in October. Blast furnaces at AK Steel Dearborn, ArcelorMittal Cleveland and Burns Harbor, and U.S. Steel Gary Works are scheduled for maintenance in October, representing an estimated 495,050 tons of steel capacity temporarily removed from the […]
By CRU Senior Analyst Erik Hedborg Part two of our three-part series: What’s next for U.S. iron ore production? After a remarkably profitable 2018, the U.S. steel industry has suffered a setback in 2019 as steel prices have dropped sharply on weaker than expected demand. Steel margins have turned negative and production cuts have been […]
I am technically on vacation this week so my Final Thoughts will be brief, and I will rely on Senior Editor Tim Triplett to handle these duties for the balance of this week. I have heard from a number of buyers this week telling me that their business is slowing, and the interest by end […]
By CRU Senior Analyst Erik Hedborg Part one of our three-part series: What’s next for U.S. iron ore production? The U.S. is blessed with a wealth of natural resources, including oil, gas, gold, copper, timber and coal. In addition, the country has large iron ore deposits that have supported its steel industry for more than […]
The steel industry enjoyed a profitable first half of 2018 due to a strong economy and tariffs on imports that drove up domestic prices. The welcome windfall prompted several companies to commit large investments toward expansion and modernization of their facilities. In all, about 31 million net tons of new steel capacity could potentially come […]
ArcelorMittal announced that it will lay off 100 workers at its Weirton, W. Va., tin plate plant. The company joins its competitors, U.S. Steel and NLMK USA, in cutting back production in recent weeks. ArcelorMittal said in a statement: “In order to maintain its position as a competitive and sustainable tin plate producer, ArcelorMittal Weirton […]