Monthly Key Market Indicators, as analysed by Steel Market Update, softened again in the past month. A typical summer slowdown followed by a surge in COVID variant cases, compounded by a lackluster job market, reflects an uneasy economic landscape. Consumer confidence has dwindled, highlighted by decreases in key indicators across the marketplace. SMU’s Key Market Indicators […]
Producer prices posted the smallest advance year-to-date in September, according to data released by the Labor Department. Despite supply chain snarls and shortages that have driven up manufacturing and shipping costs, the negligible expansion kept the historic climb for the index and subcategories for final demand going. Since the fall in early 2020, the composite […]
Steel Dynamics Inc. (SDI) posted yet another new quarterly profit record on record-high flat-rolled steel prices. And the Fort Wayne, Ind.-based electric arc furnace (EAF) steelmaker thinks that the record times could roll into the fourth quarter as well. “Domestic steel demand remains solid in our automotive, construction, and industrial end markets. We believe this […]
By CRU Advisor Greg Wittbecker LME cash aluminum prices have retreated hard from new 13-year highs, falling from $3,300 last week to reach $2,682 as we completed the week. Supply-side Price Concerns Get a Reality Check but Remain Dangerous Market euphoria over supply-side constraints ran into the effect of China’s “command economy” at work. Power […]
Global steel demand will grow by 4.5% in 2021 and reach 1.855 billion metric tons following a 0.1% growth the year prior, according to World Steel Association’s (worldsteel) October 2021 Short-Range Outlook (SRO). An additional increase of 2.2% to 1.896 billion metric tons in 2022 is forecast for steel demand worldwide. The current forecast assumes […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) changed little in October, declining slightly by 0.4% to 374.1. Price directions were mixed but fell by the most for European scrap and DRI while scrap prices in Asia had the largest increases. We expect to see similar […]
By CRU Senior Analyst Dimitry Popov and Analyst Wei Wang In recent weeks, China has been experiencing the worst power shortages in decades. Various industries in 20 provinces have been affected and even residential customers had power cuts in the extreme cases. Increasing electricity demand, short coal supply and the decarbonization drive are three main […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor Steel sheet price declines continue in the USA and Europe as lead times shorten further and inventories build. In the former market, small transactions are occurring at levels above $1,900 /s.ton, but there are many more deals occurring at well below this level. As […]
The prices contractors pay for construction materials rose further in September despite a recent decline in a few materials’ prices. The costs still far surpass the prices contractors charged in the 12-months ending in September, reports the Associated General Contractors of America (AGC) in its latest analysis of government data. “Construction materials costs remain out […]
Construction employment totaled 7,447,000 jobs on a seasonally adjusted basis in September, an increase of 22,000 month on month, reports the Associated General Contractors of America (AGC) in its latest analysis of government data. September’s total was 201,000 or 2.6% below the pre-pandemic peak from February 2020. Residential construction employment expanded by 3,400 in September, […]
Commercial Metals Company (CMC) posted record-breaking earnings from continuing operations of $152.3 million on net sales of $2.0 billion in the fourth quarter of FY 2021, exceeding the previous record posted the prior quarter by more than $22 million. For the full year, CMC’s earnings from continuing operations totaled $412.9 million, the best results in […]
United Auto Workers (UAW) members at John Deere have set up pickets after a midnight strike deadline lapsed. The strike at the Moline, Ill.-based heavy equipment manufacturer impacts more than 10,000 workers at 14 facilities – most of them in the Midwest but some as far afield as Colorado and Georgia. “Our members at John Deere […]
In its latest acquisition, Triple-S Steel Supply Co., Houston, has purchased BMG Metals, a steel distributor and metal superstore with five stocking locations throughout Virginia and Maryland. Steve Briggeman, a 21-year veteran of Triple-S, has been promoted to regional vice president. A resident of Knoxville, Tenn., Briggeman will oversee the new BMG business in addition […]
September saw the worst monthly performance for the U.S. labor market since January, according to the U.S. Bureau of Labor Statistics’ (BLS) job report. The latest data showed the economy created a stingy 194,000 new jobs in September to mark the second disappointing monthly increase in a row. The sharp dive from the 1.091 million positions […]
U.S. job creation came up short again in September with just 194,000 added, marking the second disappointing monthly increase in a row. U.S. economic growth continued to decelerate in September on COVID concerns, driving hiring to its slowest pace since January. Surprisingly, the unemployment rate dropped to its lowest level since February 2020, down 0.3 […]
Olympic Steel Inc.’s sale of its Detroit location to Venture Steel and its subsequent acquisition of Shaw Stainless & Alloys marked the latest step in a years’ long effort to pivot from roots in Midwestern carbon flat-rolled steel markets, the company’s top executive said. The Cleveland-based service center – while by no means exiting the region – […]
Olympic Steel Inc.’s sale of its Detroit location to Venture Steel and its subsequent acquisition of Shaw Stainless & Alloys marked the latest step in a years’ long effort to pivot from roots in Midwestern carbon flat-rolled steel markets, the company’s top executive said. The Cleveland-based service center – while by no means exiting the region – […]
By CRU Senior Analyst Ryan McKinley and Analyst Dave Thewlis, from CRU’s Steel Long Products Monitor Long product prices in the U.S. remained elevated and moved higher again m/m in some cases for October. Wire rod mills pushed through another round of price increases in mid-September and there was little to no resistance from buyers […]
The Dodge Momentum Index rebounded in September after contracting for three successive months. The index registered 164.9 in September, an 11% gain against the revised August reading of 148.0, according to data and analytics from the Dodge Construction Network. The improved Momentum Index in September suggests developers are looking past the current concerns over pricing, […]
Commercial Metals Co. (CMC) has found a buyer for the land in Rancho Cucamonga, Calif., that was the site of its former Steel California and Rebar Etiwanda operations. The steelmaker hopes to get $300 million from the sale, which is still subject to customary closing conditions. The company’s Steel California operations ceased in December 2020, […]
In the latest salvo in the emerging battle for green steel dominance, Nucor has launched Econiq, a new line of net-zero carbon steel products. “Building the green economy and the necessary infrastructure requires clean, advanced steel products. By introducing Econiq, Nucor is providing confidence for steel consumers to know they are purchasing the lowest greenhouse gas […]
The U.S. construction sector was virtually unchanged in August, as spending was largely flat for a second straight month. Increase in public sector projects was offset by weakness in the private sector, the Commerce Department reported. Supply chain disruptions, rising materials prices and labor shortages continue to keep the construction sector captive. The trend has […]
Total construction spending was flat for a second consecutive month in August, as a decrease in nonresidential projects offset continuing gains in residential construction, reported the Associated General Contractors of America (AGC). Spending on infrastructure year-to-date declined when compared to the same year-ago period, leading the AGC to urge the House of Representatives to promptly […]
Steel prices gradually declined through the month of September, following one full year of increasing prices. Hot rolled steel prices decreased $35 per ton ($1.75 per cwt) throughout the month, with the SMU index averaging $1,920 per ton ($96.00 per cwt) as of last Tuesday. The SMU Price Momentum Indicator was adjusted to neutral the […]
Job losses continue to have widespread effect on the construction sector. Nearly one-third of U.S. metro areas lost construction jobs during the 12-month period ended August 2021, reports the Associated General Contractors of America (AGC) in its latest analysis of government data. As the fate of a bipartisan infrastructure bill remains uncertain in the U.S. […]
U.S. Steel’s Midwest Plant is back up and running after operations were temporarily halted because of discolored wastewater, a company spokeswoman said. The Portage, Ind., finishing operation – part of U.S. Steel’s Gary Works in northwest Indiana – had been down for about a day, the spokeswoman told SMU on Wednesday afternoon. Midwest Plant typically discharges treated […]
U.S. Steel has temporarily halted operations at its Midwest Plant because of discolored wastewater discharged from its Portage, Ind., finishing facility. “The Midwest Plant was shut down as a precaution, and we continue to coordinate with agencies to collect additional samples to monitor the situation,” a company spokeswoman said in an email to Steel Market […]
By Trade Attorney Lewis Leibowitz The Section 232 tariffs are uppermost on people’s minds again, according to questions I’m getting from readers. My view is that the tariffs (and quotas and “monitoring”) have remained because of politics and the lack of ideas for reconciling the irreconcilable. We need a policy that protects domestic steel (and […]
At the top of the news this week, Steel Market Update sources reported that steel supplies are loosening as lead times from the domestic mills shorten and surging imports start to make it into service center inventories. It’s no surprise, then, that steel prices are beginning to moderate. Hot rolled steel prices rose virtually every […]
By Stephen Williamson, CRU Research Manager, Aluminum As in last week’s report, aluminum prices continue to flirt with the $3,000 per metric ton mark on the LME, $2,908/t as of this writing. However, this apparently steady price range belies a torrent of market activity. The protracted energy curtailments in China continue to cast doubt on […]