Despite all the speculation about an impending peak, Steel Market Update’s check of the market this week shows steel prices continuing to rise. SMU puts the current average HR price at a new high of $1,180 per ton, the fifth new high-water mark since the second week of January when the spot market surpassed the […]
Among steelmaking raw materials, the prices of iron ore, pig iron and scrap saw large gains in January compared to months prior, up as much as 86 percent year over year. Coking coal prices, which rebounded compared to recent months, were still down 9 percent in January versus prices one year ago. Zinc prices have declined […]
U.S. flat-rolled steel prices remain on the rise thanks to strong demand, thin spot supplies and limited short-term competition from imports. While some sources think imports could send domestic prices lower, others note that foreign steel suffers from the late deliveries that have plagued customers of domestic mills. “Too much risk ordering foreign steel with lead times into […]
Steel prices continue to trek upward. But the pace has slowed, and questions about whether the market is at or near a summit have re-emerged. “Talked to two large OEMs that are postponing buys for the next few weeks. They believe we are at peak right now,” one respondent to Steel Market Update’s check of […]
As prices soar to historical high levels, we are constantly probing, looking for signs of a crack in flat rolled or plate steel prices. Nucor announced higher plate base prices today with discrete plate being referenced at $51.00/cwt ($1,020 per ton). Here are some of the “interesting” comments we received from steel buyers this week: […]
The average lead time on spot orders of hot rolled steel from the mill declined slightly for the second time in Steel Market Update’s biweekly survey and is now more than a half-week shorter than at this time last month. Lead times for other flat rolled products remained relatively unchanged, however, in SMU’s latest check […]
After registering a slight dip in Steel Market Update data two weeks ago, lead times for delivery of spot orders of hot rolled steel inched back out again this week to an average of nearly eight weeks. SMU and most in the market have been watching closely for signs that lead times are beginning to […]
Earlier this week I received a note from one of our readers regarding the plate price index and the changes we recently made to the index (FOB Mill vs. Delivered pricing). We were asked how we are accomplishing this, and how do our members reconcile the historical data that was based on delivered pricing versus […]
Earlier this week I received a note from one of our readers regarding the plate price index and the changes we recently made to the index (FOB Mill vs. Delivered pricing). We were asked how we are accomplishing this, and how do our members reconcile the historical data that was based on delivered pricing versus […]
Steel prices seem to be changing by the minute, and so far always in an upward direction. What’s the going price for hot rolled? “Who knows? Ask me again after lunch,” quipped one respondent to Steel Market Update’s check of the market this week. SMU estimates the current average price for HRC is at a […]
This report examines the import share of sheet, plate, long and tubular products. As of November 2020, imports’ share of total sheet products was 11.4 percent, down from 11.8 percent in October. Imports’ share has been on a steady decline since its most recent peak of 16.6 percent this past May. The import share of […]
“It’s not how much it cost, it’s do I have steel to make my parts…?” That was one of the comments discussed this morning during our HARDI galvanized steel conference call. Some of the mechanical contractors have jobs to complete, and they need steel to finish. However, others are trying to hold back on buying […]
The benchmark price for hot rolled steel reached a new record high of $1,080 per ton this week, according to Steel Market Update’s latest check of the market, surpassing the previous high of $1,070 per ton recorded by SMU in 2008. Prices for flat rolled and plate steel products jumped by another $40-80 per ton […]
This report examines the import share of sheet, plate, long and tubular products. As of October 2020, imports’ share of total sheet products was 11.8 percent, down from 16.6 percent in May and from a recent high of 22.9 percent in 2015. The import share of HRC has been below 10 percent since January 2019, […]
Hot rolled lead times were slightly shorter this week, but lead times for other products were the same or slightly longer, based on Steel Market Update’s first check of the market in the new year. Lead times for deliveries of hot rolled were still highly extended at an average of nearly eight weeks, and it’s […]
Flat rolled steel prices have started the new year strong, jumping by another $25-55 per ton and taking the benchmark hot rolled price above $1,000, within sight of the record high of $1,070 per ton seen in 2008. With steel still in tight supply and ferrous scrap prices likely to increase again in January, Steel […]
Flat rolled steel prices have started the new year strong, jumping by another $25-55 per ton and taking the benchmark hot rolled price above $1,000, within sight of the record high of $1,070 per ton seen in 2008. With steel still in tight supply and ferrous scrap prices likely to increase again in January, Steel […]
Recently we were asked how we can produce our flat rolled and plate price indices when there are limited transactions either due to high prices or a holiday period like we are in now. In both scenarios there continue to be transactions (although few and far between), but we are careful not to overheat or […]
Among steelmaking raw materials, the prices of iron ore, pig iron, scrap, zinc and aluminum continue to see large gains in December compared to months prior, up as much as 65 percent year over year. Iron ore, pig iron and scrap prices have seen significant increases compared to the late summer months. Coking coal prices […]
Steel Market Update has heard reports of buyers paying well over $1,000 a ton to secure much-needed hot roll, but the average from respondents to SMU’s poll this week puts the HR price at around $985 per ton (among those who have managed to find available steel). With demand persisting despite year-end seasonality and mill […]
Steel Market Update’s check of the market a few days before Christmas shows no let-up in steel demand, as prices continue to rise and lead times continue to extend. With steel supplies remaining extremely tight, lead times for deliveries of hot rolled have stretched to more than eight weeks and coated steel orders to around […]
Based on Steel Market Update’s check of the market this week, hot rolled steel prices are nearing $1,000 per ton, within sight of a record high. With service centers and OEMs willing to pay such high prices in order to secure inventory in a tight market, it’s no surprise the buyers report little willingness among […]
Hot rolled steel prices have not yet hit $1,000 a ton, but they are not far behind. Buyers tell Steel Market Update they are seeing offers as high as $1,020 per ton, but no takers so far. SMU puts the average HR price at around $950 per ton, up substantially over last week as the […]
Flat rolled and plate steel prices continue to be quite fluid based on the analysis of the data from Steel Market Update’s survey of the market this week, as well as individual channel checks with both buyers and sellers. By “fluid,” we mean we are capturing variances in prices over a short period of time. […]
No one anticipated in August how quickly prices would go up, said CRU Principal Analyst Josh Spoores during this week’s SMU Community Chat Webinar. As four criteria lined up—steel-intensive industrial demand, low supply chain inventories, low imports, and domestic prices below global levels—steel prices in the U.S. surged at the fastest rate in 41 years, […]
On Tuesday and Wednesday of this week, I will be an instructor at our Steel 101: Introduction to Steel Making and Market Fundamentals Workshop. We have a full class with a mixture of steel service centers, manufacturing companies, steel mills, traders, analysts, and suppliers to the industry. I am looking forwarding to discussing supply, demand, […]
Steel prices continued to climb in November on strong demand and tight steel supplies. Steel Market Update’s hot rolled price index reached $770 per ton by the end of November, up 10 percent from the beginning of the month. The SMU Pricing Momentum Indicator remained at Higher, indicating prices are expected to rise further over […]
Steel Market Update’s check of the market this week shows another jump for both flat rolled and plate, taking the benchmark price for hot rolled steel to an average of $805 per ton. Sources commonly reported paying as much as $840 to secure hot rolled in a market where availability is becoming a critical issue. […]
Flat rolled steel prices just keep ratcheting up as supplies remain extremely tight, with lead times continuing to extend and sources warning of impending shortages of some products (see related articles in this issue). Steel Market Update’s check of the market this week moves the benchmark price for hot rolled up to $770 per ton, […]
Flat rolled steel prices just keep ratcheting up as supplies remain extremely tight, with lead times continuing to extend and sources warning of impending shortages of some products (see related articles in this issue). Steel Market Update’s check of the market this week moves the benchmark price for hot rolled up to $770 per ton, […]