Earlier this week, the U.S. Department of Commerce released the latest license data on foreign steel for the months of July and August. As SMU reported last week, the August trend has been for imports to be at, or above, 3 million net tons. This week the trend suggests August will be closer to 2.9 […]
Chinese steel trade data was recently released for the month of July 2018, providing updated data on iron ore imports, scrap imports and flat rolled imports and exports. Chinese imports of iron ore in July totaled 89,960,000 metric tons, an increase of 8.1 percent from the previous month, and an increase of 4.3 percent from […]
Editor’s note: The following was contributed by Analyst Ryan Cochrane of the CRU Group. Global concentrate inventories first reached critical levels in 2017 Q1, leading to Chinese smelter utilization rates falling below 90 percent and remaining at depressed levels since. Without much buffer concentrate stock remaining, the relationship between mine supply and Chinese smelter output […]
Distributors of secondary steel report generally positive market conditions, though the nonprime sector has experienced a bit of a lull in recent weeks. Secondary steel is nonprime or excess material that did not meet the specifications for its original intended use, but is acceptable to other buyers for other applications. The spot market on nonprime […]
A group representing the United States’ leading auto manufacturers, parts suppliers, auto dealers, parts distributors, retailers and vehicle service providers have formed the Driving American Jobs Coalition to oppose potential new Trump administration tariffs on imports of autos and auto parts. The coalition argues that imposing new auto tariffs will cause “massive job losses and […]
Editor’s note: The following was contributed by analysts at the CRU Group. The Turkish-U.S. political relationship has soured sharply in the past week. U.S. President Donald Trump tweeted relations were “not so good” on Friday, Aug. 10, and doubled tariffs on U.S. imports of Turkish steel. Turkish President Erdogan responded with anger, suggesting the country […]
U.S. Steel announced on Thursday that it will invest a minimum of $750 million for asset revitalization at its Gary Works facility in Indiana. “We are pleased to be making this significant investment at Gary Works, which will improve the facility’s environmental performance, bolster our competitiveness and benefit the local community for years to come,” […]
There are big differences in the year-to-date increase of hot rolled coil imports on a regional basis, according to Steel Market Update’s latest analysis of government data. Imports of hot rolled coil into the U.S. as a whole were up by 21.4 percent in June year to date, but the Pacific South was up by […]
The Great Lakes and Gulf dominate as entry points for cold rolled imports. There are big differences in the year to date decreases on a regional basis, according to Steel Market Update’s latest analysis of government data. Imports of cold rolled coil into the U.S. as a whole were down 23.1 percent year to date […]
Canada is considering provisional safeguard measures on seven classes of steel imports to prevent foreign steel shipments from being diverted into Canada as a result of U.S. trade actions. “We know that because of the unfair tariffs imposed by the United States, other countries will be seeking alternative markets for their steel products,” said Canadian […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Premium subscribers to Steel Market Update receive reports on imports broken down into district of entry and source nation. This new report from SMU takes the analysis to the product detail level. Our rationale is that the more information steel buyers have about the fine detail of what is coming into their region, the better […]
A couple of months ago, Steel Market Update was speaking in front of a group from the financial community. We were asked, “What do you look for as a sign when prices are about to change direction?” Our answer was a mill price increase announcement. Earlier this week, ArcelorMittal USA announced a $30 per ton […]
Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this new role, he and his firm design and execute risk management strategy for clients along with providing process and analytical support. In Gaurav’s previous role, he was a Trader at Cargill spending time in Metal […]
The U.S. trade situation is causing some consternation, according to analysts at CRU. During a webinar on Tuesday, which was made available to SMU member companies, analysts discussed the trade measures that have been instituted by the Trump administration and the potential impact on the U.S. and global economies. Steel and aluminum tariffs were imposed […]
U.S. steel exports in June 2018 totaled 913,705 net tons (828,900 metric tons), up 6.5 percent over May and up 0.3 percent from June 2017. Total exports have averaged around 875,000 tons the last few months. The total June export figure is above both the three-month moving average (average of April 2018, May 2018 and […]
Mills historically have enjoyed a healthy price premium for cold rolled and galvanized products over hot rolled, at times reaching as high as $220 per ton. More recently, due to the tight supplies of hot rolled, the differential has dipped as low as $80 per ton, prompting at least one mill to act. ArcelorMittal USA […]
Effective Monday, August 13, the Trump administration doubled the tariffs on steel imports from Turkey to 50 percent, stunning the market and setting off a wave of speculation on how this trade action may impact the steel and scrap markets in North America. A tweet from President Trump early Friday set the change in motion: […]
If nothing else, foreign steel imports are resilient. After June imports came in at 2,491,574 net tons, July headed right back to 3.2 million net tons on the back of the domestic steel mills who imported approximately 800,000 of slabs. Now, based on August license data through today (Tuesday, Aug. 14), the domestic mills are […]
Russel Metals reported its best quarterly results since 2008 for the second quarter ending June 30. “All of our businesses performed extremely well in the second quarter by adapting to the changing business environment. The continued uncertainty around steel tariffs and trade disruptions has resulted in the realignment of North American supply channels, which our […]
Two of the nation’s busiest cargo ports reported record months in July. The South Carolina Ports Authority handled 200,594 twenty-foot equivalent container units (TEUs) during the first month of fiscal year 2019, marking the strongest July on record and second-highest monthly container volume in the port’s history. The Georgia Ports Authority recorded its second busiest […]
ArcelorMittal USA probably surprised some customers with their announcement of a $30 per ton price increase on cold rolled and coated products. My opinion is ArcelorMittal is trying to increase the spread between the hot rolled base price and that of cold rolled and coated products. I also think they are trying to boost base […]
In a surprising tweet on Friday, President Trump announced his intentions to double the Section 232 tariffs on steel and aluminum from Turkey, raising the tax on imports to 50 percent for steel and 20 percent for aluminum. No word on when the change would take effect. “I have just authorized a doubling of Tariffs […]
Steel pricing is the product of a complex interplay between supply and demand, along with other factors such as ferrous scrap prices, imports and government trade actions. Steel Market Update canvasses steel executives twice each month with its market trends questionnaire to take the pulse of the industry. The current prevailing view shows supplies tightening, […]
June apparent steel supply fell 7.4 percent over May to 8,941,089 net tons, according to government data released late last week. Although down somewhat, supply remains in line with levels of the last three years. Apparent steel supply is calculated by adding domestic steel shipments and finished U.S. steel imports, then subtracting total U.S. steel […]
In a surprising tweet earlier today, President Trump announced his intentions to double the Section 232 tariffs on steel and aluminum from Turkey, raising the tax on imports to 50 percent for steel and 20 percent for aluminum. No word on when the change would take effect. “I have just authorized a doubling of Tariffs […]
Steel Market Update offers this early look at July’s import volume based on license data (see explanation below). The analysis evaluates the pressure that imports are having on individual products at the national level, but gives no indication of regional differences. SMU has developed a new series of regional reports for the six main flat […]
The numbers 201, 232 and 301 are getting a lot of headlines recently. They are sections under three U.S. laws that President Trump has used to impose tariffs on a variety of goods and countries. Section 201 of the Trade Act of 1974 was used to place tariffs on imports of washing machines and solar […]
Earlier this month the U.S. Department of Commerce released Final Census Data for the month of June. We found foreign steel imports were at the lowest level seen since 2012 at just under 2.5 million net tons. Finished steel imports totaled 1,886,767 net tons with all but coated steels seeing reductions. When looking at the […]
Most steel buyers are keeping inventory levels steady or even lower believing that, with steel prices so high, the risk is to the downside for the rest of this year. As one steel executive commented: “We are running inventories lean based on the elevated cost and our opinion that there is a greater chance for […]