By CRU Senior Analyst Richard Lu, from CRU’s Steelmaking Raw Materials Monitor In a recent Insight titled “Iron ore at $140 /dmt – what’s driving the fall?”, we explained that weak demand in China has caused a sharp iron ore price fall and we expect the downtrend to persist for the rest of the year. […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) fell by 4.6% in September to 375.5, marking a second straight month of decline. Scrap prices were down in nearly every market we cover, although pig iron and HBI prices again fell by more than scrap. Lower demand […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days. Through Sept. 1st, iron ore prices stumbled 18% in one month’s time, pig iron prices fell 11%, shredded scrap prices declined 4%, and zinc prices decreased 2%. Busheling scrap prices remained flat month over month, while aluminum prices rose […]
By CRU Principal Analyst Erik Hedborg and Senior Analyst Richard Lu, from CRU’s Steelmaking Raw Materials Monitor After reaching a new all-time high of more than $230 /dmt in May, iron ore prices held steady in the following months and traded in the $200-220 /dmt range for most of June and July. However, things have […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor After rising at end-August, iron ore prices have started pointing downward again in the past week as Chinese demand remains tepid while seaborne supply has been at the strongest level since end-June. Iron ore is currently trading at $135.5 /dmt, down by $18.5 /dmt […]
It’s not wise to call an inflection point based on one week of data. But I’m going to do it anyway. Because while SMU might have just one week of somewhat bearish survey data, there are plenty of other data points out there to say with some confidence that we’re at or near a peak […]
The following article on the hot rolled coil (HRC), scrap and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot Rolled While the hot rolled index continues to grind higher, coming in at just under $1,900/ST, HR futures prices also moved […]
Latin American steelmaker Ternium and Brazilian iron ore miner Vale have signed an agreement to work together to lower carbon emissions. Potential joint investments include an iron ore briquetting plant near Ternium Brasil, the company’s steel mill in Rio de Janeiro, and pig iron made from alternate raw materials such as biomass. “Vale is a […]
Swedish steelmaker SSAB said it has produced the world’s first-fossil free steel and delivered a trial order to automaker Volvo. “It’s possible to … significantly reduce the global carbon footprint of the steel industry. We hope that this will inspire others to also want to speed up the green transition,” SSAB President and CEO Martin Lindqvist […]
By Philip Bell, President, Steel Manufacturers Association Editor’s note: Phil Bell and SMA are now periodic contributors to Steel Market Update. Look for Phil’s insights on steel and events in Washington in future issues of SMU. Many people often mischaracterize the American steel industry as dirty and struggling to cut carbon emissions. This all-too-common misperception […]
By CRU Senior Editor Ryan McKinley, from CRU’s Steelmaking Raw Materials Monitor The CRU metallics price indicator (CRUmpi) fell by 4.8% in August to 393.8, making it the first reading below the 400 level since May. Price falls for scrap and HBI were similar in scale, but pig iron prices have moved notably lower. Demand […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor The iron ore price decline continues as demand for spot cargoes in China is exceptionally weak, while we have started seeing signs of improving supply from Australia. On Tuesday, Aug. 10, CRU assessed the 62% Fe fines price at $160.0 /dmt, a $25.0 […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor Iron ore has continued its fall by registering a $15 /dmt drop in the past week after steep declines at the end of last week, followed by a slight rebound on Monday and Tuesday. Chinese buying interest has subsided quickly as the number […]
We talk a lot about the price of steel going up. We don’t talk as much about spreads between hot-rolled coil and prime scrap – which are going up just as fast if not faster. And if you’ve listened to earnings calls over the last two weeks, you know that steel mills and industry analysts […]
We talk a lot about the price of steel going up. We don’t talk as much about spreads between hot-rolled coil and prime scrap – which are going up just as fast if not faster. And if you’ve listened to earnings calls over the last two weeks, you know that steel mills and industry analysts […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. David has over 20 years of trading experience in financial markets and has been active in the ferrous futures space for over eight years. You can learn more at www.thefeldstein.com or add him on twitter @TheFeldstein and on Instragram at #thefeldstein. Following Memorial […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis increased from June to July, with all products following large gains in previous months. Over the last 30 days, coking coal prices increased 16% and busheling scrap prices rose 5%. Zinc and aluminum prices increased less than 1%, while shredded scrap remained flat and pig […]
ArcelorMittal continues to forge ahead with major expansions at its North American operations on the heels of its best second-quarter profits since 2008. The multinational steelmaker recorded net income of $4 billion in the second quarter of 2021 after losing $559 million in the same quarter last year on sales that increased 76.2% to $19.3 […]
What’s this world coming to when an integrated steelmaker – a leader in an industry notorious for taking a huge toll on the environment – spends much of his earnings call talking about cutting carbon emissions? Said Lourenco Goncalves, Cleveland-Cliffs’ chief executive, last week: “Cliffs sees decarbonization as part of our license to continue to […]
2021 SMU Steel Summit Conference – Revised Agenda as of July 27, 2021 The 2021 SMU Steel Summit Conference will be held at the Georgia International Convention Center on Aug. 23-25. The convention center is conveniently located next to the Atlanta International Airport (ATL). The center and the hotels surrounding the convention center are on […]
Steel Market Update does not forecast steel prices. That’s a fact that can sometimes get lost in all the pricing data we publish. Please don’t let the good news and happy headlines you’ve been reading in SMU every week make you complacent. It’s convenient to listen to the many readers quoted in this newsletter who […]
Steel Market Update does not forecast steel prices. That’s a fact that can sometimes get lost in all the pricing data we publish. Please don’t let the good news and happy headlines you’ve been reading in SMU every week make you complacent. It’s convenient to listen to the many readers quoted in this newsletter who […]
Cleveland-Cliffs Inc. has joined the ranks of North American steel mills planning steep cuts to greenhouse gas emissions over the next 10 years. The iron ore miner, pellet producer and flat-rolled steelmaker aims to cut greenhouse gas emissions by 25% by 2030 versus 2017 levels. The company said it would do so by using less […]
So much for the summer doldrums. After a brief pause following Independence Day (and Canada Day), sheet prices have resumed their sharp upward trajectory. Hot-rolled coil prices are now over $1,800 per ton ($90 per cwt) while cold-rolled and galvanized base prices are above $2,000 per ton ($100 per cwt). If this pace of gains […]
Cleveland-Cliffs has launched a cash-incentive program across all its facilities to encourage employees to get their COVID-19 vaccines. “The program works per site. The company will pay all vaccinated employees a cash bonus based upon the level of vaccination achieved by that site,” a Cliffs spokeswoman said. If 85% of workers at a given mine, mill or […]
Though he admits it was not the original plan, Cleveland-Cliffs Chairman, President and CEO Lourenco Goncalves said Wednesday at AISTech that his company no longer intends to produce merchant pig iron for sale to competitors, as has been widely speculated. In the past two years, Cleveland-Cliffs has purchased AK Steel and ArcelorMittal USA, making it the largest […]
ArcelorMittal wants to be carbon neutral by 2050, but reaching that goal will hinge on developing new ways to take fossil fuels – namely, coal and natural gas – out of the steelmaking process, a company executive said. It will also require that key technologies – carbon capture and storage (CCS), biofuels and other renewable […]
The dilemma is global warming, CO2 is just the proxy, Cleveland-Cliffs Inc. President and CEO Lourenco Goncalves said during the opening keynote speech at CRU’s Steel Decarbonization Strategies 2021 Virtual Conference. Cliffs’ top executive took a strong stance during his talk—which opened the first major event devoted exclusively to the topic of decarbonization in the […]
The dilemma is global warming, CO2 is just the proxy, Cleveland-Cliffs Inc. President and CEO Lourenco Goncalves said during the opening keynote speech at CRU’s Steel Decarbonization Strategies 2021 Virtual Conference. Cliffs’ top executive took a strong stance during his talk—which opened the first major event devoted exclusively to the topic of decarbonization in the […]
Mark Bula sees an analogy between the latest green steel technology and the electric arc furnaces (EAFs) that transformed traditional steelmaking back in the 1980s. “Just as minimills once disrupted the industry, we must once again take a monumental leap forward,” he said. Bula is well known in the steel industry for his prior role […]