By CRU Senior Analyst Thais Terzian, Analyst Anton Perevezentsev, and Research Analyst Rosy Finlayson On February 6-7, a series of devastating earthquakes struck several provinces in southeastern Turkey and northwestern Syria, leaving thousands dead and many injured. The quakes also resulted in a massive destruction to the infrastructure of both countries. The first quake measured […]
Steel Dynamics Inc. (SDI) has named Barry T. Schneider to the newly created position of president and COO, effective March 1. Schneider is a 28-year veteran of the Fort Wayne, Ind.-based steelmaker. He has been senior vice president of its flat-roll steel group since March 2016, where he was responsible for flat-roll steel operations across three steel mills […]
The US long products market was largely stable this month, as end-use demand remained subdued, and buyers continued to work through inventories. Scrap prices rose in January, fuelling bullish sentiments, but sluggish activity limited any expansion in margins. As a result, rebar, merchant bar, and structurals were all flat month-on-month (MoM). Wire rod prices decreased […]
Preliminary Census data indicate that steel imports totaled 2.24 million net tons for the month of December. This is up 11% compared to November, a slight rebound month on month (MoM) after recording the lowest level since February 2021 the month prior. Import levels had been gradually falling since reaching a 26-month high in March […]
Editor’s note: Steel Market Update is pleased to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Total US mill shipments of steel products slipped in November and reached their lowest total year to date (YTD). Mill shipments have been fluctuating up and down all year […]
Commercial Metals Co. said high demand in North America and increased market share in Europe helped to lift net earnings 12% in its fiscal first quarter of 2023 vs. the same period a year earlier. The Irving, Texas-based long products steelmaker and recycler posted net earnings of $261.8 million in its fiscal first quarter ended Nov. […]
Preliminary Census data indicates that steel imports will have totaled 2.01 million net tons for the month of November. This is down 17% compared to the month prior, now standing at the lowest level recorded since February 2021. Import levels have been gradually falling since reaching a 26-month high in March 2022 of 3.09 million […]
Monthly Key Market Indicators (KMI) deteriorated over the past month after steadily improving since July, while steel buyer sentiment inched up after it had tumbled to a 26-month low, according to the latest analysis by Steel Market Update. Positive and neutral indicators have eased, while negative indicators rose. Despite recent improvements, headwinds remain. The economy […]
Total US mill shipments of steel products edged up in October, recovering slightly month on month (MoM), after falling in September to their lowest total year to date (YTD). Mill shipments have been fluctuating up and down all year with little consistency, and October was no different. October’s shipments totaled 7.65 million tons, a 0.9% increase […]
Preliminary Census data indicates that steel imports will have totaled 2.41 million net tons for the month of October. While up 7% from the prior month, October levels are on the low side compared to the previous 18 months. Recall that monthly import levels declined 11% month-on-month (MoM) in September, having also fallen 6% both […]
Monthly Key Market Indicators (KMI) have steadily improved since reaching their most recent low in July, though steel buyer sentiment recently tumbled to a 26-month low, according to the latest analysis by Steel Market Update. Positive and neutral indicators have increased, while negatives have eased. Despite some recent improvements, present headwinds are still notable. The […]
Total US mill shipments of steel products were down in September, falling to their lowest total year-to-date (YTD). Mill shipments have been fluctuating up and down all year with little consistency. September’s shipments totaled 7.58 million tons, a 7.2% decline from August’s 8.18 million tons, and the lowest total since February 2021. Apparent supply also saw a […]
Preliminary US Census Bureau data indicates that steel imports totaled 2.24 million net tons in the month of September. This is down 11% from the prior month, and is potentially the lowest monthly rate seen since February 2021. Recall that monthly import levels also declined 6% from July to August and 6% from June to […]
“Training is everything: Invest in your employees.” – Chris Shipp, vice president of sales for Reibus Over 50 individuals got an up close and personal look at steelmaking at Steel Market Update’s final Steel 101 Workshop of 2022 on Oct. 19–20 in Corpus Christi, Texas. A mill tour was hosted by Steel Dynamics Inc. (SDI) Southwest Sinton […]
A strong performance from its steel fabrication operations offset lower earnings within its flat rolled steel business, resulting in another strong quarter for Steel Dynamics Inc. The Fort Wayne, Ind.-based steelmaker and recycler reported net income of $914 million on sales of $5.65 billion in the third quarter ended Sept. 30. While sales were 11% […]
Total US mill shipments of steel products were down in August, slipping to their second-lowest total year-to-date (YTD). Mill shipments have been fluctuating up and down all year with little consistency. August’s shipments totaled 8.04 million tons, a 0.9% decline from July’s 8.11 million tons. Apparent supply also saw a month-on-month (MoM) decline in August, down 1.3% […]
Commercial Metals Co. posted solid results for its fiscal fourth quarter ended Aug. 31, helping make the company’s fiscal year 2022 the best financial performance in its 107-year history. CMC’s North American segment saw strong demand for it finished long products during the quarter, as well as meaningful increases in downstream bid volumes. Destocking activity […]
Final US Census Bureau data indicates that steel imports totaled 2.51 million net tons during the month of August, just 267 tons higher than the preliminary figures released in late September. This is down 6% from the prior month. It is also the third lowest monthly rate in the past year and a half (behind […]
Steel service center Willbanks Metals Inc. is expanding in Fort Worth, Texas. The company recently purchased property across the street from the current location of its headquarters and flat-rolled steel sheet and plate service center, allowing it to expand with a new Red Bud stretcher leveler and additional processing equipment. “We are thrilled to continue […]
Preliminary US Census Bureau data indicates that steel imports will have totaled 2.51 million net tons during the month of August. This is down 6% from the prior month and potentially the lowest monthly rate seen since February of this year. Recall that monthly import levels also declined 6% from June to July. August figures […]
Total mill shipments of steel products were largely sideways in July, up marginally when compared to June. Mill shipments have been fluctuating up and down all year with little consistency. July’s mill shipments totaled 8.11 million tons, a 0.3% increase from June’s 8.09 million tons. Apparent supply also saw a slight gain in July, up just 1.1% […]
Final Census data shows that 2.68 million net tons of steel imports entered the country in July, down 6% compared to the month prior and the lowest rate in the past five months. The preliminary import figures reported last week were just 4,000 tons shy of the final count (most of the flat rolled products […]
Preliminary Census data indicates that July steel imports will total 2.67 million net tons, down 6% compared to June and the lowest monthly rate since February of this year. July figures are down 14% compared to March’s 26-month high of 3.09 million tons. Import licenses for August are currently at 1.98 million tons through August […]
Total mill shipments of steel products shrank in June, after gaining ground the month before. June’s mill shipments totaled 8.09 million tons, a 3.5% decline from May’s 8.38 million tons. Apparent supply also declined in June, down 2.8% versus the prior month. This analysis is based on steel mill shipment data from the American Iron and Steel […]
Final Census data shows that June steel imports totalled 2.84 million net tons, 24,000 tons higher than preliminary figures reported last week. June imports are down 8% compared to March’s 26-month high of 3.09 million tons. Import licenses for July now total 2.57 million tons through Aug. 3rd data. This is up from 2.15 million […]
Monthly Key Market Indicators (KMI) fell through June and into July, while steel buyer sentiment tumbled to a two-year low, according to the latest analysis by Steel Market Update. Negative and neutral indicators have increased, while positive indicators have collapsed. Present headwinds are notable. Consumers and businesses have pulled back on spending, and rising inflation […]
Preliminary Census data indicates that June steel imports will total 2.81 million net tons, just 61,000 tons higher than May levels. June figures are down 9% compared to March’s 26-month high of 3.09 million tons. Import licenses for July are currently at 2.15 million tons through July 25th data. (July figures are expected to increase as import […]
On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects including steel prices, supply and demand, and new mill capacity. We are sharing some of the comments we received in each buyer’s own words rather than summarizing them in ours. Want to have your voice heard? Contact Brett@SteelMarketUpdate.com to […]
Total mill shipments of steel products grew in May, after shrinking the month prior. May’s mill shipments totaled 8.38 million tons, a 3.1% increase from April’s 8.12 million tons. Apparent supply also recovered in May, up 3.9% versus the prior month. This analysis is based on steel mill shipment data from the American Iron and Steel Institute […]
Final Census data reveals that May steel imports totaled 2.75 million net tons, just 17,000 tons higher than April, but down 11% from March’s 26-month high of 3.09 million tons. June import licenses are at 2.79 million tons through July 6th data, (up from 2.29 million tons last week), now in line with April and […]