According to Baker Hughes data from November 13, 2015, the U.S rig count for the week was 767 rigs exploring for or developing oil or natural gas. This is a decrease of 4 rigs compared to last week, with oil rigs up 2 to 574 rigs, gas rigs down 6 to 193 rigs, and miscellaneous […]
The various flat rolled steel indexes followed by Steel Market Update are falling in line and reporting hot rolled, cold rolled, galvanized and plate prices the same. We find this interesting as the various steel price collection techniques are slightly different from one another. Could this be a harbinger that flat rolled prices are close […]
September steel exports totaled 811,582 net tons (736,256 metric tons), down 1.8 percent over August and down 21.5 percent from September 2014. Total September figures are below both the thee month moving average (3MMA, average of July 2015 through September 2015 figures) and the twelve month moving average (12MMA, average of October 2014 through September […]
According to Baker Hughes data from November 6, 2015, the U.S rig count for the week was 771 rigs exploring for or developing oil or natural gas. This is a decrease of 4 rigs compared to last week, with oil rigs down 6 to 572 rigs, gas rigs up 2 to 199 rigs, and miscellaneous […]
License data for October was updated on November 3rd through the Steel Import Monitoring System of the US Commerce Department. At SMU we perform a detailed analysis of this data, an explanation of our methodology is given at the end of this write up. Total rolled product licensed imports in the single month of October were […]
The Steel Market Update (SMU) Steel Buyers Sentiment Index is continuing its downward trend, even though the Current Index is 4 points higher and the Future segment of the Index is 9 points higher than what we reported during the middle of October. The numbers we follow closely are our 3 month moving averages (3MMA) […]
Our scrap sources reported ferrous scrap prices as having the most strength in the east where export pricing has bounced off the bottom and momentum has apparently turned in that region. One of the east coast dealers told us that scrap flows are “atrocious” and if it wasn’t for the “terrible demand situation the market […]
Based on the most recent import license data released by the U.S. Department of Commerce, October import licenses totaled 3,399,248 net tons. We anticipate when the final census numbers are released for the month of October total steel imports will be somewhere between 3.2 and 3.4 million tons (net tons not metric tons). Imports of […]
Recent media reports indicate that Essar Steel Algoma may be heading for another return to insolvency as it struggles to meet its debts. According to media reports, the company has engaged a law firm and restructuring specialist to advise it and may file for insolvency by the end of the month. Although Essar Steel Algoma […]
Altos Hornos de Mexico (AHMSA) reported a net loss of 1.28 billion pesos ($77.8 million) for third quarter 2015, almost double its loss from the same period in 2014. Revenue dropped to 10.2 billion pesos ($619 million) for the quarter. Steel production fell 1.16 percent to 922,138 tonnes. Production of thermal coal increased 5.31 percent […]
Flat rolled steel prices continued to erode at a moderate pace this past week. Steel Market Update reviewed the results of three other steel indexes as well as our own for the week ending October 30, 2015. We found, with the exception of the Platts indices, all of the other indexes saw prices down by […]
According to a media reports, Essar Steel Algoma is in talks with senior lenders regarding entering insolvency. Bloomberg sources say a court filing is possible within the next month. Reuters said the company has hired law firm Weil Gotshal & Manges LLP and restructuring specialists Evercore Partners Inc. to advise it. Canadian steelmaker, Essar Steel […]
Hot rolled prices are poised to crash through the $400 per ton ($20.00/cwt) barrier and head toward lows not seen since 2009 when SMU’s HRC average briefly reached $380 per ton ($19.00/cwt). This past week SMU saw flat rolled steel and plate prices drop on all of the indexes followed by SMU except SteelBenchmarker which […]
“The UK steel industry is struggling for survival in the face of extremely challenging market conditions.” That’s how Tata Europe CEO Karl Koehler summed up the condition of the industry that is facing an onslaught of cheap steel imports, particularly from China, high energy costs and a weak export market due to a strong British […]
Swedish steel company SSAB posted a loss of SEK 191 million ($22.4 million*) in third quarter. Earnings were down by SEK 600 million ($70.4 million) due to lower margins on heavy plate in North America, the costs of relining the blast furnace in Lulea, and negative currency effects. The company plans to cut approximately 500 […]
According to Baker Hughes data from October 23, 2015, the U.S rig count for the week was 787 rigs exploring for or developing oil or natural gas. This is unchanged overall compared to last week, with oil rigs down 1 to 594 rigs, gas rigs up 1 to 193 rigs, and miscellaneous rigs unchanged at […]
The difference between auto industry and steel industry: the UAW has issue a notice to GM that they could walk out at midnight tonight (Sunday) if they don’t have a contract. The USW is content to work under the old contract for as long as they can get away with it since both US Steel […]
This report is a trial balloon and we ask your opinion as to whether such an analysis for the three major sheet products would be of interest. If so, we would go to the expense of purchasing data from the Iron and Steel Statistics Bureau, in the UK for the global trade of HR, CR […]
Based on Steel Market Update (SMU) analysis of the recently released MSCI service center inventory and shipment data, total service center carbon steel shipments decreased by 55,000 tons in September to 3.105 million tons. Shipping days at 21, were unchanged from August. On a tons per day basis (t/d) shipments decreased from 150,500 tons in […]
Flat rolled steel prices continued their downward spiral this past week based on our analysis of the four steel indexes followed by Steel Market Update. We will be watching prices closely over the next week or two to see if we breach the psychological $400 per ton number on benchmark hot rolled coil. We have […]
According to Baker Hughes data from October 16, 2015, the U.S rig count for the week was 787 rigs exploring for or developing oil or natural gas. This is a decrease of 8 rigs when compared to last week, with oil rigs down 10 to 595 rigs, gas rigs up 3 to 192 rigs, and […]
The Metal Service Center Institute (MSCI) released shipment and inventory data for the month of September from their member companies earlier today. Service centers shipped 3,260,800 tons during the 21 days available to ship during the month. This equates to a daily shipment rate of 155,276 tons of all steel products combined. Shipments were down […]
Canadian shipments for all steel products in the month of September were 451,600 net tons, an increase of 5.5 percent from the month before but a decrease of 8.7 percent from September 2014. Inventories at the end of the month stood at 1,462,000 tons, down 5.7 percent from last month and down 3.3 percent from […]
Flat rolled steel prices continued their slide according to the various flat rolled steel market indexes followed by Steel Market Update. The greatest movement was found with benchmark hot rolled which was down double digits on all of the indexes reporting last week. We saw mixed results when reviewing cold rolled, galvanized, Galvalume and plate […]
According to Baker Hughes data from October 9, 2015, the U.S rig count for the week was 795 rigs exploring for or developing oil or natural gas. This is a decrease of 14 rigs when compared to last week, with oil rigs down 9 to 605 rigs, gas rigs down 6 to 189 rigs, and […]
Licensed data for September was updated on October 6th through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is available to our […]
The first rule of business travel is don’t book the last flight of the day to your end destination – especially when you have a three hour ride to the airport and, guess what, the last 20 miles are in Chicago rush hour traffic… My thanks to Mario Briccetti (Steel 101 instructor) who imitated another […]
US Steel announced on Tuesday that it is examining a possible consolidation of its North American flat rolled operations and may idle steelmaking operations and most finishing operations at Granite City. US Steel said it routinely adjusts production to align with market fluctuations. The potential consolidation is a result of challenging global market conditions, including […]
According to the various flat rolled steel indexes followed by Steel Market Update, hot rolled, cold rolled, galvanized, Galvalume and plate prices continue to be weak this past week. Benchmark hot rolled was the most stable with all four indexes reporting last week. SMU and Platts were showing the HRC average as being $430 per […]
Essar Steel Algoma will begin laying off employees on Sunday evening (Oct. 4) starting with the evening shift. USW Local 2551 received notice that approximately 100 workers will be cut, with the plate and cold mills most heavily affected. “We’ve had to match staffing levels to production and we have experienced a sustained drop in […]