US plate prices have remained mostly flat this week, a trend we’ve seen since Nucor announced a plate price cut in late November. Recall that in late November, Nucor said it would be lowering plate prices by $140 per ton ($7 per cwt) with the opening of its January order book. Plate tags have varied […]
The US and Canadian rig counts decreased again last week, but they remain elevated compared to a year ago, according to data from oilfield services company Baker Hughes. The total US rig count was 753 last week, down seven rigs from the week prior. The number of active oil rigs in the US fell to 600 […]
Nucor Corp. has increased its cost estimate for its new sheet steel mill in West Virginia by ~$400 million. The Charlotte, N.C.-based steelmaker said Feb. 23 that its board approved additional capital for the project. The company now expects a net cash outlay of ~$3.1 billion for the West Virginia electric-arc furnace (EAF) sheet mill, up from $2.7 billion when […]
Ryerson Holding Corp. swung to a loss in the fourth quarter on lower sales volumes and selling prices. The Chicago-based service center said the “transient margin compression” was most pronounced in the carbon steel sheet and stainless markets. The fourth-quarter loss capped off an otherwise profitable year for the company, which forecast better times ahead […]
Canadian flat-rolled steelmaker Stelco Holdings Inc. recorded sharply lower fourth-quarter profits. The culprit: the “triple whammy” of declining steel prices, shorter lead times, and higher costs, company chairman and CEO Alan Kestenbaum said. “Now, however, we are seeing a reversal of all of these factors with rising steel prices … lengthening lead times, and input […]
Imported sheet and plate products’ arrival at US ports declined in December, leading their share of the US markets to edge lower, while domestic shipments gained ground during the month. That’s according to a Steel Market Update analysis of import data from the US Commerce Department and domestic shipment figures from the American Iron and […]
Nucor Corp. said its Towers & Structures unit will build a new transmission tower production plant in Decatur, Ala. The Charlotte, N.C.-based steelmaker said the plant will be adjacent to the Nucor Steel Decatur sheet steel mill. It is expected to create 200 jobs. In December, the company announced plans to build two tower production plants […]
NLMK USA has announced new, higher base prices for steel sheet. The steelmaker said the higher prices were effectively immediately on all new spot orders and justified by “strong demand and extending lead times,” in a letter to customers on Wednesday, Feb. 22. NLMK USA said that its new minimum base price for hot-rolled coil was […]
Total US mill shipments of steel products declined in December, easing for the second straight month after fluctuating up and down for much of the year. December was the lowest mill shipment total for 2022, falling to the lowest total since February 2021. Shipments totaled 7.27 million tons in December, a 1% decrease from November’s 7.34 […]
Sheet prices are up again. By a lot. For the third time this month. And it’s not over yet! Nucor alone is up more since Thanksgiving ($310/per ton) than they were after the invasion of Ukraine ($275/ton), according to our price increase calendar. We had obvious drivers for the last two big rallies. The snapback […]
Sheet prices increased this week as another blitz of price hikes – this time $100 per ton ($5/cwt) – spurred the market higher. The latest announcements from the likes of Nucor, Cliffs, US Steel, and ArcelorMittal, all setting a new base price for hot band of $1,000 per ton, are yet to be reflected in […]
ArcelorMittal has followed three major domestic mills in increasing sheet prices by at least $100 per ton ($5 per cwt). Luxembourg-based ArcelorMittal, one of the world’s largest steelmakers, also said it was targeting a minimum base price of $1,000 per ton for hot-rolled coil (HRC) effective immediately. That echoes new HRC base prices announced earlier […]
Galvanized sheet continues to be in high demand, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) Sheet Metal/Air Handling Council. Since the January HARDI meeting, prices have increased, lead times have extended, scrap is up, and zinc is down. Despite the roller coaster, HARDI members remain bullish on demand in general. […]
Cleveland-Cliffs has called back workers to its idled Northshore Mining operations in Minnesota, a company spokeswoman confirmed. She declined to say how many workers were being called back or why. “We will provide more details when we decide when and at what capacity this operation will be brought back online,” the spokeswoman said in an […]
US Steel has joined competitors Nucor and Cleveland-Cliffs in raising base prices for steel sheet by at least $100 per ton ($5 per cwt). The Pittsburgh-based steelmaker said the price hike was effective immediately for all new spot orders in a letter to top sales staff dated Tuesday, Feb. 21. The company said the increases […]
Cleveland-Cliffs didn’t take long to join Nucor in increasing spot prices for steel sheet by at least another $100 per ton ($5 per cwt). The Cleveland-based steelmaker, like Nucor, is also targeting a base price of $1,000 per ton for hot-rolled coil (HRC). Cliffs said the increase was effective immediately and applied equally to all […]
Nucor Corp. is pushing its hot-rolled coil price up by at least another $100 per ton ($5 per cwt), its third sheet price hike in a matter of three weeks. The Charlotte, N.C.-based company, the largest steelmaker in the US, said the move was effective immediately for base prices on new orders. Nucor made the […]
Sheet prices continue to push higher even as buyers contacted by Steel Market Update remain divided about the state of demand. Hot-rolled coil lead times now stand at 5.41 weeks, up from 4.94 weeks in our prior survey and marking the first time this year that HRC lead times have broken out significantly above five […]
The US and Canadian rig counts decreased slightly last week, but they remain sharply up compared to a year ago, according to data from oilfield services company Baker Hughes. The total US rig count was 760 last week, down one from the week prior. The number of active oil rigs in the US slipped to 607 […]
As US sheet prices continue the rally that began in late November, overall import levels remain relatively low. But lead times have extended and so too have mill asking prices. US mills are now asking for $900 per short ton ($45 per cwt) for hot-rolled coil. Market contacts in Europe note that exports from India […]
Steel mill lead times, following recent pricing moves, have pushed upwards, according to SMU’s latest market survey. SMU’s hot-rolled lead time is approximately 5.4 weeks, up from 4.9 weeks at our last check of the market two weeks ago. The result is notable because lead times have been just below five weeks since the beginning of […]
Cleveland-Cliffs has ruled out spending money to build new electric-arc furnaces (EAFs), the company’s top executive said. The Cleveland-based steelmaker will instead focus on decarbonizing its blast furnaces (BFs) and basic-oxygen furnaces (BOFs), which are better suited than EAFs to supply the automotive industry, company chairman, president, and CEO Lourenco Goncalves said. “Cleveland-Cliffs does not […]
Reliance Steel & Aluminum Co. saw its best financial performance in 2022 on record-breaking sales of $17.03 billion, nearly 21% above 2021. The results were achieved “across nearly every metric during a period of continued metal price volatility and broader economic uncertainty,” Reliance president and CEO Karla Lewis said in earnings commentary released on Thursday, Feb. 16. […]
The “new normal,” we have heard that a whole lot since the pandemic took hold. Are we really seeing a paradigm shift? Or is it just a trendy phrase? But, first, let’s talk about price hikes. If three’s a crowd, then what’s five – a herd? The week got off to a quick start early […]
Sheet prices rose again this week as a blitz of $50-per-ton ($2.50/cwt) price hikes spurred the market higher. Steel Market Update’s hot-rolled coil price now stands at $825 per ton, up $15 per ton from last week and nearing the highest levels we’ve seen since late July. The difference: HRC prices were on their way […]
ArcelorMittal and NLMK USA have followed three major domestic steelmakers in increasing sheet prices by at least $50 per ton ($2.50 per cwt). Luxembourg-based ArcelorMittal said it was targeting a minimum base price of $900 per ton effective immediately, echoing moves first announced by Nucor and Cleveland-Cliffs. “The increase is applicable to all new spot […]
US Steel said it will supply General Motors (GM) with verdeX® sustainable steel produced at Big River Steel, its electric-arc furnace (EAF) sheet mill in Arkansas. The low-carbon steel produced at the Osceola, Ark., mill will begin shipping to GM manufacturing facilities starting this year, the Pittsburgh-based steelmaker said. “We are pleased to join GM in […]
US Steel Corp. got in on the action and increased spot prices for carbon steel sheet by at least $50 per ton ($2.50 per cwt). The move is effective immediately, the company said in a letter to customers dated Monday, Feb.13, and joining Nucor and Cleveland-Cliffs in their efforts to boost sheet tags. The latest price […]
Cleveland-Cliffs has joined Nucor in increasing spot prices for steel sheet by at least another $50 per ton ($2.50 per cwt). The Cleveland-based steelmaker, like Nucor, is also targeting a base price of $900 per ton for hot-rolled cold. Cliffs said the increase was effective immediately and applied equally to all new orders of hot-rolled, […]
Nucor Corp. is pushing hot-rolled coil price up by at least another $50 per ton ($2.50 per cwt), its second sheet price hike in ten days. The Charlotte, N.C.-based company, the largest steelmaker in the US, said the move was effective immediately for base prices on new orders. Nucor made the announcement in a letter to […]