The S&P Case Shiller Home Price Indices for May showed home prices continue to rise across the U.S. The 10 city composite posted a 4.7 percent gain year over year while the 20 City Composite gained 4.9 percent. The S&P/Case-Shiller U.S. National Home Price Index, covering all nine U.S. census divisions, recorded a 4.4 percent […]
Flat rolled steel prices saw little movement this past week in benchmark hot rolled but, we did see some cracks in the “shadow” effect as the spreads between CRU and the other indexes started to widen. These small gyrations in the numbers in any one week may be due to what is being collected and […]
Stability is perhaps the most frightening for steel buyers and sellers alike. At least there is an expectation of good times (or bad) when prices are moving on a weekly basis in one direction or the other. What we have seen since the middle of May is a slight “jiggle” as prices bounce up and […]
Up, down and sideways is how to describe the various flat rolled price indexes this past week. Hot rolled prices averaged $465, down $1 from the week prior. However, the SMU index was up $5 per ton to $470, CRU was down $7 per ton to $461 and Platts remained stationary at $465 per ton […]
Since SMU did not publish on Sunday evening we wanted to get the information regarding flat rolled steel price indices from last week. We saw prices tighten up amongst the various indexes which reported pricing last week (SMU, CRU and Platts). However, as with the week before, price momentum was flat going into the 4th […]
Benchmark hot rolled prices remain stuck at $465(ish) according to the four flat rolled steel indexes followed by Steel Market Update. Platts rose $3 last week and reported $465 per ton HRC as did Steel Market Update, which was unchanged from the prior week. CRU was down $3 per ton to $460 per ton and […]
Hot rolled coil prices appear to be stuck in the $462 to $465 range. We have seen very little movement on HRC since the move made after the first price increase announcement back on April 28th. Cold rolled, which SMU saw as being up $10 this past week, went nowhere according to Platts and CRU […]
With the price increase announcements and the filing of a trade case against coated products we saw galvanized and Galvalume prices move higher by double digits this past week. Galvanized increased by $15 per ton according to SMU and $16 per ton according to CRU. Galvalume prices moved higher by $10 per ton. When looking […]
Flat rolled steel prices have stabilized over the past couple of weeks, according to our analysis of the various steel indexes we follow on a regular basis. The expectation is with the increase in scrap prices and the filing of the anti-dumping suit against China, South Korea, India, Taiwan and Italy will bring a new […]
Today SMU is not only going to discuss where flat rolled steel prices were this past week based on our analysis of steel pricing from our steel index as well as CRU, Platts and SteelBenchmarker, we are also going to discuss price momentum which our SMU Price Momentum Indicator currently points to higher prices over […]
We saw mixed results this past week as the various indexes attempt to find firm ground for flat rolled steel pricing. Of the three reporting indexes followed by Steel Market Update last week, one (Steel Market Update) saw two of the four products as being lower than the week before. Although, SMU advised that the […]
First, a quick note to our readers that follow the Steel Market Update (SMU) indices closely, after speaking with dozens of steel buyers of hot rolled products at the Metal Industry Dinner (Boy Scout Dinner) in Chicago we adjusted the lower end of our range to $440 per ton. This resulted in our HRC average […]
Flat rolled prices have begun to climb out of the hole which has been almost a year in making. Steel Market Update and Platts both saw benchmark hot rolled prices as being up $10 per ton this past week while CRU had HRC up $1 per ton. The HRC average of the three reporting indexes […]
All of the domestic steel mills located east of the Rockies (except U.S. Steel) made flat rolled price increase announcements this past week. The first steel index to note an upward move in pricing was Platts where by the end of this past week had taken their hot rolled index up $5 per ton from […]
The slippage in flat rolled steel prices continued this past week but we are seeing signs that the end to the slide “may” be close. Hot rolled prices dropped $3 (SMU) to $5 (Platts and CRU) per ton with only $1 separating the indexes from one another. We normally see the indexes tightening up the […]
It certainly doesn’t matter that Steel Market Update (SMU) Price Momentum Indicator is pointing at Neutral, flat rolled steel prices have continued to fall and last week was no exception. Benchmark hot rolled pricing (prior to any extras being added) dropped on all four indexes followed by SMU. Our own index dropped to $447.50 per […]
The pace of the flat rolled steel price slide slowed this past week, based on an analysis of the various steel indexes followed by Steel Market Update. As the pace slows, the spread between indexes also tends to get tighter due to fewer variations in the data collected. Looking at benchmark hot rolled, Steel Market […]
Flat rolled steel prices continued to slide their slide this past week according to all of the steel price indexes followed by Steel Market Update. Benchmark hot rolled dropped to $460 per ton ($459 at CRU), down $10-$12 per ton depending on the index chosen. A number to keep in mind: $390 per ton. That […]
The S&P/Case-Shiller Home Price Indices for January showed home price growth slowing from year ago levels. The National Home Price Index registered a 4.5 percent annual gain for the 12 months ending in January 2015 as compared to a 10.5 percent increase in January 2014. Month over month gains for the 10- and 20-city indexes […]
Benchmark hot rolled pricing has tightened, according to the various flat rolled steel indices we follow. With SteelBenchmarker reporting this past week all four indexes were within a few dollars of one another with SMU and Platts at $470 per ton, CRU $1 higher at $471 and SteelBenchmarker $3 higher at $473 per ton. Our […]
This weeks Comparison Price Indices analysis saw flat rolled steel prices as continuing their 8 month slide. Benchmark hot rolled coil (or bands) moved Lower by an average of $7 per ton this past week. Of the four steel indexes followed by Steel Market Update (including our own) the spread from low (SMU at $470) […]
Flat rolled steel prices plummeted again this past week according to the steel indexes followed by Steel Market Update. All four indexes reported pricing this week. The range from low to high on benchmark hot rolled coil was $480 to $495 per ton with SMU at the low end of the range and SteelBenchmarker at […]
The pace of the drop in flat rolled steel prices slowed this past week. From our perspective, we saw hot rolled prices as down $5 per ton, cold rolled and galvanized as flat and Galvalume up $5 per ton compared to the previous week. All of the reporting steel indexes (SMU, CRU & Platts) followed […]
Virtually all flat rolled steel products indexed by the steel indices followed by Steel Market Update saw steel pricing decline by double digits and, in most cases, the erosion in pricing on hot rolled, cold rolled, galvanized and coated was at least $20 per ton ($1.00/cwt). First an observation, as we watch the weekly price […]
Home prices increased slightly in December according to data from the S&P/Case-Shiller Home Price Indices, climbing 4.6 percent year over year in the National Home Price Index. The increase was slightly less than November’s pace of 4.7 percent. On a monthly basis, both the 10- and 20-City Composites reported increases of 0.1 percent in December. […]
For the first time in many weeks, Steel Market Update, Platts and CRU hot rolled price indices are almost the same. SMU and Platts see HRC prices as averaging $515 per ton while CRU is two dollars higher at $517 per ton. Cold rolled prices did not meet the same fate as Platts sees CRC […]
Steel Market Update recently attended the Port of Tampa Steel Conference in Tampa, Florida. When speaking with the service centers and traders it was apparent that we are in a period of time when buyers do not trust that the price today will be any good tomorrow. Our Comparison Price Indices report accentuates the issues […]
The range between indexes shrank this past week as benchmark hot rolled coil price averages dropped to $541 per ton, with SMU and Platts now even at $540 per ton and CRU slightly higher at $543 per ton. We did not include SteelBenchmarker pricing as they only produce pricing twice per month and we have […]
Mark Millett, CEO of Steel Dynamics pointed out the inconsistencies in the steel prices being referenced by two of the steel indexes followed by Steel Market Update. Millett spoke about the erosion of pricing and referenced the indexes in this comment, “…But I think our optimism is that American pricing has eroded and it has […]
According to the flat rolled steel price indexes followed by Steel Market Update, many of the flat rolled steel products are seeing their mill pricing erode by $10 per ton or more this past week. The spread between the indexes is relatively modest on hot rolled coil, but is much more pronounced in cold rolled, […]