Home price gains slowed in June according to the S&P/Case-Shiller Home Price Indices. The monthly national index increased just 0.9 percent in June and the 10-City and 20-City Composites increased 1.0 percent. The index shows a sustained slowdown in the 12 months ending June 2014. “Home price gains continue to ease as they have since […]
The spreads between the various steel price indexes watched on a weekly basis by Steel Market Update have been shrinking. With the exception of plate (which had price increase announcements during the week) and SMU cold rolled, all of the other flat rolled steel price indices either moved sideways or moved lower this past week. […]
Spreads between the indexes are beginning to narrow as the market has been trending sideways (with a slight upward bias) for a number of weeks. Benchmark hot rolled numbers were up $2 per ton due to SteelBenchmarker reporting new numbers this past week (SteelBenchmarker only reports prices twice per month). The average of all the […]
Flat rolled steel price indexes followed by Steel Market Update on a weekly basis saw prices continuing to be firm to slightly higher on most products. Benchmark hot rolled coil prices averaged $676 per ton, up $2 per ton compared to the previous week’s average. SMU HRC pricing remained stable at $675 per ton while […]
Last week flat rolled steel prices moved higher by modest amounts, $5 per ton or less with a couple exceptions (see table below). Since the beginning of July our SMU steel price index has seen hot rolled prices move higher by $15 per ton, cold rolled prices by $10, galvanized prices by $10 and Galvalume […]
Home prices grew moderately in May according to the latest S&P/Case-Shiller Home Price Indices. On a year-over-year basis the 10-City Composite gained 9.4 percent and the 20-City gained 9.3 percent, down from the previous y/y gains reported last month of 10.9 percent and 10.8 percent, respectively. The 10- and 20-City Composites posted gains of 1.1 […]
Flat rolled steel prices have been essentially trending sideways for the past couple of weeks and this past week was no exception. We saw our hot rolled average increase by $3 per ton to $673 per ton with the CRU having the lowest HRC pricing at $667 per ton and Platts the highest at $680 […]
Steel Market Update watches a number of flat rolled steel indexes and once per week we provide our readers an analysis of what movement has occurred in each during the prior week. This week we found small movements, mostly indicating higher prices, in most of the indices. Hot rolled saw two indexes moving prices by […]
This past week saw very little movement in any of the indexes followed by Steel Market Update. Benchmark hot rolled averages ranged from a low of $670 per ton (SMU) to a high of $671 per ton (SteelBenchmarker). The only change from the previous week was in the CRU which rose $1 per ton to […]
Steel Market Update did not publish on Sunday evening due to the extended 4th of July holiday here in the United States. We know that there are a number of our readers who enjoy our Comparison Price Indices (CPI) articles on Sunday evening. Here is what the CPI looks like as of Monday evening: Benchmark […]
During the month of June we saw all of the steel price indexes followed by Steel Market Update decline by double digits ($10 per ton or greater). The only exception was on plate which saw two of the three indexes taking prices higher and one remaining the same. Looking at the indices as a whole […]
With the exception of Platts, the balance of the steel indexes followed by Steel Market Update dropped slightly with benchmark hot rolled coil now averaging $667 per ton, down $4 per ton for the week. When looking at cold rolled Platts was unchanged, SMU was up $5 per ton to $785 per ton with CRU […]
Home prices on an annual basis slowed more than expected in April according to the S&P/Case Shiller Home Price Indices. Indices for both the 10 and 20-city composites showed an annual gain of 10.8 percent, down from 12.4 percent in March and lower than economist expectations of 11.4 percent. Annual gains were lower in 19 […]
The SMU Comparison Price Indices saw prices dropping on all products except plate products. Benchmark hot rolled coil saw pricing drop anywhere from $2 per ton (CRU) to $10 per ton (Platts). The HRC average dropped $6 per ton for the week to $670 per ton. Cold rolled also dropped on all of the reporting […]
Two flat rolled steel price indexes, Steel Market Update and Platts, saw little movement in flat rolled steel prices this past week. The two indexes are probably the closest they have been in some time with SMU showing hot rolled pricing averaging $670 per ton ($33.50/cwt) while Platts has their benchmark HRC price at $675 […]
Prices dropped on all flat rolled items with the exception of plate which remained the same as one week ago. Hot rolled prices dropped by an average of $5 per ton, cold rolled by an average of $10 per ton, galvanized by $3 per ton and Galvalume by $15 per ton. With the latest drop […]
With the exception of SteelBenchmarker which only supplies steel indices twice per month, all of the other indexes showed flat rolled steel averages as being either the same or down slightly compared to one week ago. Perhaps the most surprising has been Platts which by the end of this past week had taken its benchmark […]
What SMU found interesting when looking at flat rolled steel price movement over this past week is Platts, the industry optimist recently, dropped their benchmark hot rolled pricing multiple times as the week progressed. Platts ended the week down $10 per ton to $685 per ton. The $685 is where SMU had its HRC index […]
Lead times are reported as being relatively stable compared to two weeks ago, but down slightly from the cycle highs which were achieved within the past two months. Our manufacturing and service center respondents reported the domestic steel mills as becoming more flexible in their flat rolled steel price negotiations. Fifty percent of the manufacturing […]
Lead times are reported as being relatively stable compared to two weeks ago, but down slightly from the cycle highs which were achieved within the past two months. Our manufacturing and service center respondents reported the domestic steel mills as becoming more flexible in their flat rolled steel price negotiations. Fifty percent of the manufacturing […]
With the exception of plate, flat rolled steel prices either moved sideways or slightly lower based on the steel indexes followed by Steel Market Update. Prices appear to have peaked with benchmark hot rolled averaging $688 per ton, cold rolled $808 per ton, galvanized .060″ G90 $871 per ton and Galvalume .0142″ AZ50, Grade 80 […]
Steel Market Update was the big mover of hot rolled prices this week as we took our average to $685 per ton or $10 per ton higher than one week ago. CRU, Platts and SteelBenchmarker all held their numbers as is for the week. The hot rolled indexes average is up $5 per ton to […]
This past week three of the four flat rolled steel price indexes followed by Steel Market Update (SMU) reported only modest gains in benchmark hot rolled pricing with SMU being the most conservative holding our pricing at the same levels as we had reported the prior week. Platts was the one exception as their hot […]
Steel Market Update (SMU) flat rolled steel price indices all saw very large double digit increases from the beginning to the conclusion of April 2014. Steel Market Update provides a range for our readers from low to high with the average being our indexed number for the product. We saw benchmark hot rolled prices increasing […]
Steel Market Update follows a number of price indices on a weekly basis. All of the indices saw double digit increases during the month of April. The average change on hot rolled was +$43 per ton, cold rolled +$47 per ton, galvanized +$66 per ton and Galvalume +65 per ton. Plate prices remained relatively stable […]
Steel Market Update is aware that many buyers and sellers of steel have been keyed in on the variations between various flat rolled steel indexes. In the past, Steel Market Update found the spread between our steel index and those of Platts and CRU to generally be negligible ($1-$10 per ton at any one time). […]
Flat rolled steel prices continued to rise for the 6th week (according to SMU HRC average) with the benchmark hot rolled coil price average just below $680 per ton and just a few dollars away from the $685 announced by Nucor and a number of other mills at the beginning of April. For the first […]
All of the steel indices followed by Steel Market Update saw flat rolled steel prices increase this past week. Benchmark hot rolled coil saw the spread between the indices shrink while the average HR price increased by $17 per ton. Cold rolled was one item where the price spread increased across the various steel indexes […]
Three of the four indices followed by Steel Market Update posted higher flat rolled steel averages through the end of this past week. CRU made the biggest catch-up move taking their benchmark hot rolled index to $654 per ton, up $21 per ton since the previous week. CRU and SMU HRC indices are now within […]
Steel Market Update is aware that many buyers and sellers of steel have been keyed in on the variations between various flat rolled steel indexes. In the past, Steel Market Update found the spread between our steel index and those of Platts and CRU to generally be negligible ($1-$10 per ton at any one time). […]