The December Empire State Manufacturing Survey indicated disappointing manufacturing conditions for December. The survey by the Federal Reserve Bank of New York reported the general index at 1.0, up three points from November but indicating almost no change in activity for the month. The new orders index rose slightly but stayed in negative territory at […]
The spread between the various indices followed by Steel Market Update narrowed this past week with only $5 separating the indexes on benchmark hot rolled coil pricing. Platts dropped $5 per ton and met Steel Market Update at $675 per ton while all of the other indices came in at $670 per ton. Cold rolled […]
With the exception of SMU all of the flat rolled steel indices were status quo from last week to this week. Benchmark hot rolled is right about $670 for everyone but Platts who sees the market up $10 higher than everyone else. Cold rolled is $780ish for everyone but Steel Orbis who has it down […]
Flat rolled steel prices moved modestly higher during the month of November according to the indexes followed by Steel Market Update. Benchmark hot rolled ranged from a low of $668 to a high of $680 although all of the indexes except Platts were indicating HRC pricing about $670 per ton ($33.50/cwt). Most items increased by […]
Steel Market Update (SMU) follows four other indices besides our own and provides the data to our members on a weekly basis. Recently, we asked our readers if they would like for us to continue providing CRU data and the responses indicated there continues to be an interest in their numbers. We have agreed to […]
Flat rolled steel prices continue to be firm to strengthening according to the steel indices followed by Steel Market Update. Benchmark hot rolled coil hovered around $670 per ton on all the indexes with the exception of Platts which moved their number up $5 per ton to $680 per ton. Steel Orbis did not see […]
I appreciate all of you who took the time to respond to my question regarding CRU and our continuing to publish CRU numbers in our CPI (Comparison Price Indices). There were enough respondents who wanted us to continue so we have bit the bullet and renewed our relationship with CRU for another year. The majority […]
I have a question for our members – I have just received the new bill for what it will cost me to publish the CRU indices in our Sunday night comparison of various indexes. Before I agree to pay what I believe to be an excessive amount for the right to publish their numbers I […]
We saw all of the indices capturing higher flat rolled steel prices this past week. Benchmark hot rolled range from $665 to a high of $675 per ton as price assessments rose from $5 to $15 per ton compared to the prior week. The SMU Price Momentum Indicator continues to point toward higher prices over […]
All of the indices continue to show strength at the domestic steel mills as prices remained relatively steady to rising this past week. Even with the minor drop in hot rolled and galvanized by our own index which we attribute to just the way the data fell this past week. Steel Market Update continues to […]
The flow of higher pricing slowed this past week as a number of indices – including Platts – did not move their flat rolled steel price assessments compared to the previous week. The range between high and low on benchmark hot rolled coils shrunk to $6 per ton with Steel Market Update being in the […]
Just about all of the steel indices monitored by Steel Market Update have benchmark hot rolled coil at, or very close to, $660 per ton ($33.00/cwt) as of this past week. Prices have risen by approximately $5 to $10 per ton during the week. The short term trend is for prices to remain firm and […]
During our HARDI steel conference call held earlier today (see article above) one of the wholesalers asked the question how many times have we seen galvanized base prices at, or above, $40.00/cwt? We thought it was a legitimate question and was one we could easily answer using our own galvanized base price indices. So, SMU […]
Steel Market Update is a member of an association connected to the construction industry called HARDI. HARDI stands for Heating, Air-conditioning, Refrigeration Distributors International. HARDI and The Institute for Trend Research (ITR), an economic forecasting company, work together to gather economic data to provide a forecast to the HARDI members located in the United States […]
The domestic mills pushing for customers to switch to Platts indices may shudder when they realize that Platts benchmark hot rolled coil index is the lowest of the five followed by Steel Market Update.Even so, all of the indices are now within $6 per ton of each other. The average price for hot rolled, using […]
The following information was in a press release received by SMU from CRU. We have requested more information from CRU regarding the audit, how it has impacted their data providers and any other pertinent information they were able to gather through the process. We will follow up with another article when we receive information from […]
There was little to no change with most of the indices this past week. What might have been the most noteworthy is Steel Orbis is no longer the lowest priced on benchmark hot rolled. Also of note is Platts is no longer the highest priced index for HRC. Will this be the week when prices […]
The various steel indices followed by Steel Market Update showed very little change in their pricing assessments of flat rolled steel coils. Most of the indexes saw prices as moving sideways as we wait for buyers to digest the latest offerings from the domestic steel mills. In the case of Steel Market Update we collected […]
With the exception of SteelBenchmarker, which is only published twice per month, benchmark hot rolled pricing was between $640-$645 per ton (Steel Orbis did not report prices to SMU this week). Platts, which is being mentioned by some mills as replacing the CRU indices for future price adjustments, did take their hot rolled and cold […]
Manufacturing activity in the Tenth District slowed in September according to a survey by the Federal Reserve Bank of Kansas City. The month-over-month composite index that factors in production, new orders, employment, supplier delivery times, and raw materials inventory indices, was 2, dropping from 8 in August and 6 in July. The production index slid […]
Prices this week are slightly lower over what we saw last week. For all of the companies below, prices fell or remained steady for all four products followed. We saw slight movement from $10 per ton lower or no change at all. Benchmark hot rolled prices range from $635 to $645 per ton (average $640.50 […]
Steel Market Update (SMU) has received many emails from our readers as well as interested parties regarding our SMU Price Momentum Indicator which we have had at Neutral since Friday, August 23, 2013. Since that time we have seen hot rolled pricing remain in the $630-$660 per ton level (see Comparison Price Indices article below) […]
None of the indexes watched by Steel Market Update (SMU) on a regular basis saw flat rolled steel prices rising this past week. We saw very modest movement lower ($1-$5 per ton) or no change. Benchmark hot rolled prices range from $645 to $652.50 per ton (average $648.90 per ton). We have discussed this issue […]
Picking up where we left off at the end of July – during the month of August we saw relatively modest movement in flat rolled pricing out of the various indices we track on a regular basis. SMU is the only index showing some erosion in the benchmark hot rolled and cold rolled indices. The […]
We are starting to spot slight gyrations in the other indexes that we monitor on a regular basis. Most of the items reported this past week were unchanged from the week prior. It is important to remember there are differences in both the collection techniques of the various indexes as well as different FOB […]
Cliffs Natural Resources announced Tuesday that it has entered a nine year agreement to provide iron ore pellets to AK Steel. The new agreement runs from 2014 through 2023. Cliffs will continue to supply AK Steel under its previous agreement from now until 2014. The new agreement sets minimum and maximum volume purchases from Cliffs […]
We got a taste of everything this past week from the various steel indexes we monitor on a regular basis. Platts, which recently has been on the leading edge of higher flat rolled steel prices, scaled their numbers back on both hot rolled and cold rolled this week. CRU budged ever so slightly higher on […]
Platts continues to lead the other steel indexes on both benchmark hot rolled as well as cold rolled pricing. Platts has hot rolled coil priices at $665 per ton this past week, while the rest of the indexes SMU reviews on a continuous basis have the product ranging from $645 to $653 per ton. A […]
Over the past decade more steel indices have emerged in the steel commodities markets. All serve the same objective of providing pricing benchmarks for buyers and sellers of steel – and, in recent years, for the financial settlement of derivative contracts. As the number of indices grew so did the questions surrounding the validity of […]
By John Packard Have flat rolled steel prices reached their peak? We captured mixed results in this week’s analysis of the indices followed by Steel Market Update. Platts Midwest hot rolled and cold rolled coils both shot up $12.50 per ton compared to where we had them one week ago. Steel Orbis numbers did not […]