Environment and Energy

Active Gas & Oil Rig Count in mid-November

Written by Brett Linton

According to Baker Hughes data from November 13, 2015, the U.S rig count for the week was 767 rigs exploring for or developing oil or natural gas. This is a decrease of 4 rigs compared to last week, with oil rigs up 2 to 574 rigs, gas rigs down 6 to 193 rigs, and miscellaneous rigs unchanged at 0 rigs. Compared to this time last year, the 767 count is down 1,161 rigs, with oil rigs down 1,004, gas rigs down 157, and miscellaneous rigs unchanged.

The decline in the drilling of new gas and oil wells is having a direct impact on the amount of line pipe, storage tanks, and OCTG that is being used by the energy sector. A good portion of these products come from hot rolled coil or plate substrate, and are reasons for both the short lead times on hot rolled and plate at North American steel producers and the falling steel prices we have seen going back to mid-2014.

The situation in Canada is also down significantly over this time last year. The Canadian rig count decreased by 9 to 176 rigs this past week, with oil rigs down 11 to 68 rigs and gas rigs up 2 to 108 rigs. Compared to last year the 176 count is a decrease of 226 rigs, with oil rigs down 148 and gas rigs down 78. International rigs decreased by 29 to 1,111 rigs for the month of October, a decrease of 197 rigs from the same month one year ago. For a history of both the US and Canadian rig count, visit the Steel Market Update website here.

About the Rotary Rig Count

A rotary rig is one that rotates the drill pipe from the surface to either drill a new well or sidetracking an existing one. They are drilled to explore for, develop and produce oil or natural gas. The Baker Hughes Rotary Rig count includes only those rigs that are significant consumers of oilfield services and supplies.

The Baker Hughes North American Rotary Rig Count is a weekly census of the number of drilling rigs actively exploring for or developing oil or natural gas in the United States and Canada. Rigs considered active must be on location and drilling. They are considered active from the time they break ground until the time they reach their target depth.

The Baker Hughes International Rotary Rig Count is a monthly census of active drilling rigs exploring for or developing oil or natural gas outside of the United States and Canada. International rigs considered active must be drilling at least 15 days during the month. The Baker Hughes International Rotary Rig Count does not include rigs drilling in Russia or onshore China.

Brett Linton

Read more from Brett Linton

Latest in Environment and Energy