International Steel Prices
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/750e3dd61243dd8a5f18e5aa5bfd667e.jpg)
Foreign vs. Domestic Hot Rolled Steel Price Comparison
Written by Brett Linton
March 5, 2020
Our latest look at foreign versus domestic hot rolled prices shows the U.S price advantage remains strong, according to SMU and CRU price indices released earlier this week. The price gap between domestic HRC compared to German and Italian products has widened over our mid-February update, while the East/Southeast Asian price spread has shrunk (but still remain disadvantageous to U.S.-produced HRC).
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs can fluctuate, ultimately influencing the true market spread. We are comparing the SMU U.S. hot rolled weekly index to CRU hot rolled weekly indices for Germany, Italy and the Far East (East and Southeast Asian port).
SMU includes a 25 percent import tariff effective on foreign prices after March 23, 2018. We then add $90 per ton to the foreign prices in consideration of freight costs, handling, trader margin, etc., to provide an approximate “CIF U.S. ports price” that can be compared against the SMU U.S. hot rolled price. Note that we do not include any antidumping (AD) or countervailing duties (CVD) in this analysis.
German HRC
As of Wednesday, Mar. 4, the CRU German HRC price was $484 per net ton, up $14 over the previous week and up $17 from two weeks prior. Adding tariffs and import costs, that puts the German price at $695 per ton delivered to the U.S. The latest SMU hot rolled price average is $580 per ton, up $20 per ton over last week, and unchanged compared to two weeks prior. Therefore, domestically sourced HRC is theoretically $115 per ton cheaper than imported German HRC; the spread was $118 last week and $94 two weeks ago. U.S. prices have held this price advantage for 68 consecutive weeks.
Italian HRC
CRU published Italian HRC prices at $453 per net ton, up $12 from last week and up $17 over two weeks ago. After adding tariffs and import costs, the delivered price of Italian HRC is approximately $656 per ton. Therefore, domestic HRC is theoretically $76 per ton cheaper than imported Italian HRC; the spread was $81 the previous week and $55 two weeks prior. U.S. prices have held the price advantage for 48 consecutive weeks.
Far East Asian HRC
The CRU Far East Asian HRC price fell $6 over last week to $425 per net ton, down $4 from two weeks prior. Adding tariffs and import costs, the delivered price of Far East Asian HRC to the U.S. is $621 per ton. Therefore, U.S.-produced HRC is theoretically $41 per ton cheaper than imported Far East Asian HRC; the spread was $69 last week and $46 two weeks ago. Domestic prices have held this price advantage for 56 consecutive weeks.
The graph below compares all four price indices and highlights the effective date of the tariffs. Foreign prices are referred to as “equalized,” meaning they have been adjusted to include tariffs and importing costs for a like-for-like comparison against the U.S. price.
Note: Freight is an important part of the final determination on whether to import foreign steel or buy from a domestic mill supplier. Domestic prices are referenced as FOB the producing mill, while foreign prices are FOB the Port (Houston, NOLA, Savannah, Los Angeles, Camden, etc.). Inland freight, from either a domestic mill or from the port, can dramatically impact the competitiveness of both domestic and foreign steel. When considering lead times, a buyer must take into consideration the momentum of pricing both domestically and in the world markets. In most circumstances (but not all), domestic steel will deliver faster than foreign steel ordered on the same day.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/04/SMU_BL_headshot-V4-150x150.png)
Brett Linton
Read more from Brett LintonLatest in International Steel Prices
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/07/SMU_CR_ForeignVs.Domestic_2024-0719_Thumbnail.png)
Imported CR still cheaper despite lower US prices
The price gap between US cold-rolled (CR) coil and imported CR has fallen to a 10-month low as domestic tags continue to drift lower. Domestic CR coil prices averaged $920 per short ton (st) in our check of the market on Tuesday, July 16, down $40/st from the week before. CR tags are now down […]
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/07/SMU_ForeignVs.Domestic_2024-0718_Thumbnail.png)
US HRC prices fall more than 10% below imports
US hot-rolled (HR) coil prices this week drifted further below offshore hot band prices on a landed basis. The premium is now near a two-year low. SMU’s check of the market on Tuesday, July 16, put domestic HR coil tags at $640 per short ton (st) on average, down $10/st from last week. Stateside hot […]
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/07/SMU_CR_ForeignVs.Domestic_2024-0712_Thumbnail.png)
Imported CR still cheaper despite declining US prices
Offshore cold-rolled (CR) coil remains cheaper than domestic product. The gap continues to tighten, however, as US CR coil prices slip to a nine-month low. Domestic CR coil tags averaged $960 per short ton (st) in our check of the market on Tuesday, July 9, down $5/st from the week before. CR tags are now […]
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2023/07/CRU-Logo-2023-07-21-at-4.35.41-PM.png)
CRU: Sluggish plate demand weighs on prices
Global Plate prices declined in all regions this week amid slow seasonal demand. With bearish outlooks on demand in the near term, market participants are watching how mills will react to low order entry levels and short lead times. In the US and China, production has been steady, but in Europe, steel mills are contemplating […]
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/07/SMU_ForeignVs.Domestic_2024-0711_Thumbnail.png)
Sliding US HRC prices fall further below imports
US hot-rolled (HR) coil prices continued to drift lower this week, falling further below imported hot band tags on a landed basis. SMU’s check of the market on Tuesday, July 9, put domestic HR coil tags at $650 per short ton (st) on average, down $15/st vs. last week. Domestic HR coil prices are now […]