The administrative law judge presiding over U.S. Steel’s Section 337 case against Chinese steelmakers has extended the deadline for fact discovery by three weeks. The close of discovery is now set for July 15, pushing back the evidentiary hearing from September to mid-October. In the International Trade Commission case it filed in April 2016, U.S. […]
A decision on Section 232 trade action is on hold until sometime after the G20 summit in Hamburg, Germany, this week. U.S. Department of Commerce officials have not announced a release date for the findings of the investigations on steel and aluminum imports and their impact on national security. The original due date was June 30th […]
Steel Market Update received a question from a large service center group regarding the use of the Section 232 process on steel and whether the due diligence being done now could be used “down the road” and applied against another steel product. Here is the question we received and the response from trade attorney Lewis […]
Stelco has been officially acquired by Bedrock Industries as of June 30. The former U.S. Steel Canada entered protection under the Companies’ Creditors Arrangement Act in September 2014 and will now stand on its own as Stelco Inc. “This is an exciting day for Stelco and for all of those who have worked so hard […]
Once its new Ruhrstahl-Heraeus (RH) degasser is fully commissioned in the next 30-45 days, Big River Steel will have all its steelmaking equipment up and running. Except for “a few hiccups,” the startup of the new EAF mill in Osceola, Ark., has gone smoothly, said Mark Bula, chief commercial officer, “above plan, plan-plus.” Speaking at […]
The “will they or won’t they” drama around Section 232 and whether the Trump administration will place tariffs on steel imports is reaching a peak. The Department of Commerce is expected to announce its findings on the Section 232 investigation by the end of next week. According to CNBC, a draft of the report has been circulated […]
Worthington Industries posted a strong fourth quarter, setting record annual earnings per share and quarterly net earnings of $56.5 million. Net sales increased 18 percent year-over-year to $845.3 million. Steel processing sales rose 25 percent to $582.2 million, driven by higher average selling prices. Automotive demand is beginning to soften, said President and COO Mark […]
As if it is not enough to call every ton of imported steel “dumped,” “subsidized” or “unfairly priced,” steelmakers are now using a scare tactic by telling our politicians we need a strong domestic steel industry in the interest of national security. As a Bloomberg report pointed out, less than 3 percent of the steel consumed in the […]
Steel Market Update (SMU) Publisher John Packard and Executive Editor Tim Triplett were in New York City over the past two days meeting with manufacturing companies, service centers, steel mills, trading companies and members of the financial community associated with the steel industry. We found the first words off of everyone’s lips were “what do you think […]
Ryerson Holding Corp., a processor and distributor of industrial metals, said end-market shipments to most sectors improved in the second quarter, particularly in commercial ground transportation and HVAC industries. Shipments also increased to the oil and gas sector, while a quarterly year-over-year decline was seen in industrial machinery and equipment, consumer durables, and food processing […]
Schnitzer Steel, a metals recycler and steel bar producer, reported its best third quarter since FY 2012. Total revenue increased 36 percent sequentially and 25 percent year-over-year to $477 million. Net income was up 50 percent from second quarter and 51 percent from Q3 2016 to $17 million. The improvement was primarily in the company’s […]
Galvanized steel producers Bhushan Steel and Essar Steel are in serious trouble with their lenders. Banks led by the Reserve Bank of India have initiated insolvency proceedings to recoup losses on delinquent accounts through loan reorganizations. Bhushan reportedly has outstanding loans of $7.3 billion and Essar Steel $6.97 billion, according to India’s Economic Times. A […]
Commercial Metals Co., Irving, Texas, plans to exit its International Marketing and Distribution Segment. As an initial step, on June 12, its CMC Cometals International subsidiary signed a definitive agreement to sell its raw materials trading division, CMC Cometals, to Traxys North America L.L. and Traxys Europe S.A., affiliates of The Carlyle Group. CMC Cometals […]
The Association of Steel Distributors is now a technical affiliate of the Fabricators & Manufacturers Association, International, Elgin, Ill. ASD functioned as an independent, nonprofit service center trade group for 75 years, but changing market conditions and flagging membership forced the association to ally with a larger organization to ensure its continued survival. “This is […]
Daily shipments by service centers in May decreased by 1.4 percent from April’s result. On average since 2009, May has increased by 1.3 percent, therefore these latest numbers were a little worse than normal for this time of year. Carbon steel shipments were 148,500 tons per day in May and months on hand on the […]
New York State legislators approved an agreement this week prohibiting foreign steel to be used for New York roads and bridges. The “Buy American” legislation requires that seven identified state agencies purchase steel and iron manufactured completely in the U.S. for infrastructure projects valued at $1 million or more. Exemptions could be granted for specific […]
The United States’ NATO allies are worried about the upcoming decision on the Section 232 investigation of steel imports and their impact on national security. European officials warn that restrictions on EU imports could add to the anti-American sentiment already building in Europe over Russian sanctions, the withdrawal from the Paris climate accord and President […]
The Metals Service Center Institute, Rolling Meadows, Ill., has elected Holman Head chairman of the MSCI board, effective July 1. Head is president and chief operating officer of O’Neal Industries, Birmingham, Ala. He replaces Richard A. Robinson, president of Norfolk Iron & Metal Co., Norfolk, Neb., who has served as chairman for the last two […]
JSW Steel (USA) has received approval from its board for a full-scale modernization of its Baytown, Texas, steel plate mill. The project is expected to take 20 months to complete and will result in a fully modern discrete plate mill with significantly more product offerings. “While perfecting the unique plate and contiguous pipe mill facility […]
ArcelorMittal and Marcegaglia have purchased Italian steel milll Ilva in a $2 billion deal expected to close June 30. The mill’s assets will be leased by the consortium AM Investco Italy Srl for $200 million per year with payments applied to the purchase price. AM Investco will receive the steel facility free of long-term debt […]
Mill Steel Co., Grand Rapids, Mich., one of the nation’s largest distributors of flat-rolled carbon steel, expanded its operations and geographic presence with the opening of a new facility in Houston. The new Texas location is now operational with slitting and cut-to-length capabilities in the 100,000-square-foot facility. This premier building houses three production lines with […]
On Friday afternoon, Steel Market Update learned the U.S. Department of Commerce Section 232 briefings with Capitol Hill on steel remedies scheduled for Friday were cancelled. The reason for the cancellation, according to World Trade Online, was the lack of progress within the administration on its approach to the issue. The briefing was to have […]
Service center shipments of all steel products totaled 3,420,300 tons for the month of May, up 7.0 percent over year-ago levels, reports the Metals Service Center Institute. MSCI released May shipping, inventories and month’s-on-hand (MOH) data for the United States on Thursday, June 15. The daily shipment rate for May was 155,900 tons, which is […]
Steel shipments by Canadian service centers in May totaled 415,000 net tons, up 14.5 percent from the previous month and up 6.8 percent from May 2016, reports the Metals Service Center Institute. On a daily rate basis, total shipments were 18,900 tons per day in May (a 22-day month), down from 19,100 tons per day […]
Steel Dynamics, Inc., reported lower earnings guidance for the second quarter due to operational issues at two of its plants. An upgrade to Steel Dynamics’ galvanizing line at Butler required a three week outage, diminishing second-quarter pretax earnings by $15 million. In addition, quality issues related to start-up of the new Galvalume and paint line […]
One of the suggestions being floated within the steel industry is that Wilbur Ross will recommend some form of TRQ (trade rate quota) system whereby quotas are set up based on an average period of time. To help our readers imagine what that might mean we have taken two periods of time on galvanized steel […]
Bedrock Industries received a deal on the purchase of Canada’s Stelco, acquiring it for less than $500 million, according to a report by the Hamilton Spectator. U.S. Steel originally purchased what was then a much larger Stelco for $1.1 billion in 2007. The many transactions required to satisfy creditors, pension payouts, retiree benefits, taxes and […]
Nucor Corp. expects second-quarter results to be somewhat weaker than the first quarter, but an improvement from second-quarter 2016. Results in the range of $1.00 to $1.05 per diluted share will be Nucor’s best second-quarter performance since 2008. In guidance this week, Nucor noted a decrease in the performance of its sheet and bar mills […]
Steel buyers and traders of foreign steel who have orders on the books and vessels on the water need to be aware the Section 232 statute states that when the president of the United States receives the recommendation from the U.S. Department of Commerce, he then has 90 days to make an announcement. Once the […]
The uncertainty surrounding the Section 232 national security investigation on steel has HARDI members worried about what the steel industry will be like if the ruling favors domestic steel mills and imports are sharply curtailed. In the monthly steel conference call hosted by HARDI (Heating, Air-conditioning, and Refrigeration Distributors International), members talked about “chaos” and […]