Global steel production in the three months through June set another record and once again China was the driver, reports the World Steel Association, with the following analysis by SMU. World steel production in the month of June totaled 141,046,000 metric tons, down from 143,204,000 tons in May. Capacity utilization was 73.0 percent, up from […]
Last week, Steel Market Update (SMU) completed our mid-July flat rolled market trends analysis. We invited 650 steel executives to participate. Of those responding, 48 percent were service centers, 41 percent were manufacturing companies, and 8 percent were trading companies, with steel mills and toll processors accounting for 4 percent each. One of the questions […]
The week ending July 21 was another mixed week for flat rolled steel and plate prices. Steel Market Update (SMU) steel price indices saw two products as being higher, two lower and one unchanged. Platts had two higher and one lower. SteelBenchmarker did not report prices this week as they only report twice per month. […]
On Wednesday, Nucor became the first flat rolled mill east of the Rockies to increase spot prices on hot rolled, HRP&O, cold rolled and galvanized steels. Nucor Sheet Mill Group sent out a letter to their customers advising that effective immediately they were taking pricing up by a minimum of $25 per ton ($1.25/cwt). On […]
The U.S. Department of Commerce (DOC) released new foreign steel import license data on July 18. The trend for July is for steel imports to remain quite high, in the mid 3-million-net-ton range. We expect imports to be lower than June’s 3.9 million net tons, but above the 12-month and 3-month moving averages. Finished steel […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel HR futures prices have moved $12-$27/ST higher on very light trading volumes this past week. In spite of the higher HR […]
As the steel industry waits for clarity on Section 232 we got another week where flat rolled steel prices came in with mixed results. We saw some of the items indexed have their averages rise while others fell. In reality it doesn’t appear that there is a lot pushing prices in one direction or another […]
U.S. raw steel production hit 1,763,000 net tons in the week ending July 15, up 1.7 percent from the previous week and up 5.8 percent from the same week last year. Mill capacity utilization for the July 15 week averaged 75.6 percent, up from 74.3 percent the prior week and 71.3 percent the prior year. […]
Flat rolled prices were mixed this past week. Early last week we were collecting information from steel buyers who were advising Steel Market Update that steel mill lead times were short and there were still holes in the order books at many of the domestic mills. As the week progressed we found, especially after the […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As the Flack Global Metals director of risk management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic (USA) hot rolled coil prices (FOB Domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and […]
We believe that misinformation (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for our premium subscribers. We are […]
The U.S. Department of Commerce (DOC) released license data for the month of June as well as the first 11 days of July. The bottom line is imports of foreign steel into the U.S. continue to be worrisome (to the domestic steel mills) and the early trend is for July 2017 to be another three […]
The market has become “quiet” over the past week and our sources (steel buyers) are providing mixed messages, which is showing up especially in our galvanized index whose average was down $25 per ton today. The GI number was impacted by cheap pricing being reported on commodity grade galvanized with one GI buyer telling us, […]
Rising steel prices, some in anticipation of Section 232 trade action, are blurring the line between prime and secondary steel, report service center executives familiar with secondary steel products. Grand Steel Products, Wixom, Mich., sells both prime steel and secondary—material that did not meet the specifications of its initial customer but is still suitable for […]
U.S. steel mills managed to export just over one million net tons in May, according to just-released data by the U.S. Department of Commerce. Exports increased by 150,000 tons over April 2017 and were 203,000 tons greater than what was exported during May 2016. May 2017 is the first month to exceed one million tons […]
Domestic raw steel production was 1,733,000 net tons in the week ending July 8, up 0.9 percent from the previous week and 4.0 percent from the same week in 2016, reports the American Iron and Steel Institute (AISI) in Washington. Mill capacity utilization in the July 8 week was 74.3 percent, up from 73.6 percent […]
As expected, ferrous scrap prices traded sideways (July delivery to be the same as June) in most markets. Of course, having just said that, we do need to point out that the steel mills sourcing scrap from the East Coast had to pay $10 per gross ton more in order to keep scrap from moving […]
Flat rolled steel prices were mixed with SMU seeing increases in hot rolled, cold rolled, galvanized (.060″ G90) and Galvalume. SMU took plate prices down $15 per ton. Platts saw prices as stable on all but cold rolled, which they saw down $5 per ton compared to the prior week. We had a shortened week […]
Total raw steel production for the month of May was 7,606,893 net tons, with 5,168,112 tons produced by electric arc furnaces (EAF) and 2,438,781 tons produced by blast furnaces. May raw steel production was 231,724 tons or 3.1 percent higher than the previous month, but 86,653 tons or 1.1 percent lower than the same month last […]
Steel Market Update saw modest improvements in flat rolled steel prices mostly associated with reductions of the discounts found at the lower end of the ranges. There are a number of mills that are waiting to see what happens with the Section 232 investigation before announcing new prices or opening their order books for the next […]
The final license data for June was reported by the Steel Import Monitoring and Analysis system of the U.S. Commerce Department on July 5. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel If you compare prices between last week and this week, you will see the HR futures market has found support and […]
Domestic raw steel production totaled 1,717,000 net tons in the week ending July 1, off 0.7 percent from the previous week and down 1.5 percent from the same week in 2016. The mill capacity utilization rate was 73.6 percent, down from 74.2 percent the prior week and 74.5 percent the same time last year, reports […]
John Harris is the former director of raw materials for ArcelorMittal. Currently, he is a consultant and speaker on global metallics, and he will be a speaker at this year’s SMU Steel Summit Conference at the end of August. Mr. Harris and Philip Hoffman of Hoffman Iron & Steel have been conducting a friendly debate […]
The following article was sent to us by one of our steel and scrap trading sources located within China. He has been actively involved in the export of ferrous scrap out of China this year and understands where that market is headed right now (and why). Here is what he shared with Steel Market Update […]
On Thursday, Steel Market Update (SMU) published an article about the scrap markets entitled “Ferrous Scrap: Sideways in July?” In the article, John Harris, the former scrap buyer for ArcelorMittal and one of our speakers at this year’s SMU Steel Summit Conference, gave his opinions on the future issues associated with the industry. On Friday, […]
Flat rolled steel prices inched higher this past week on the indexes followed by Steel Market Update (SMU). We saw just about everyone take benchmark hot rolled prices higher by $5 per ton. SMU took our HRC average from $600 to $605, Platts took theirs from $605 to $610 and SteelBenchmarker took theirs from $603 […]
Steel Market Update (SMU) spoke with ferrous scrap executives about the outlook for the industry, not only looking at the upcoming negotiations with the steel mills for July shipments, but also the long-term view. The scrap industry is upbeat about its future as electric arc furnaces continue to take market share from integrated steel producers. […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic (USA) hot rolled coil prices (FOB Domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and […]