Earlier this week SteelBenchmarker reported their latest world export price for hot rolled steel at $501 per net ton ($552 per metric ton), unchanged from their price two weeks ago. With an estimated $70 per ton in freight, handling and trader margin added, that puts the world price at approximately $571 per ton CIF USA […]
In late May SteelBenchmarker reported their world export price for hot rolled steel at $501 per net ton ($552 per metric ton), unchanged from their price earlier in the month. With an estimated $70 per ton in freight, handling and trader margin added, that puts the world HRC price at approximately $571 per ton CIF […]
Steel imports to the U.S. totaled 3.7 million net tons according to preliminary data from the US Census Bureau but the reaction to this data depends on one’s point of view. The American Institute for International Steel (AIIS) and the American Iron and Steel Institute (AISI) both came out with reports on April imports, but […]
The break for the Memorial Day Holiday here in the United States took some of the pressure off both buyers and sellers of steel as both sides regroup and begin to look at July and beyond flat rolled steel pricing. One steel mill executive told us that they were seeing downward pressure on their mill […]
The U.S. Department of Commerce released Preliminary Census Data on steel imports into the United States for the month of April on Friday. As expected steel imports jumped by 20 percent compared to the previous month and by 36 percent year-over-year (days adjusted basis) to 3,726,199 net tons (3.4 million+ metric tons). This is for […]
The numbers are not looking good for the domestic steel mills as the latest license data from the US Department of Commerce shows May steel imports may well exceed the 3.7 million tons just reported for the month of April (Preliminary Census data for April). We remind our readers that the May tonnage shown in […]
What SMU found interesting when looking at flat rolled steel price movement over this past week is Platts, the industry optimist recently, dropped their benchmark hot rolled pricing multiple times as the week progressed. Platts ended the week down $10 per ton to $685 per ton. The $685 is where SMU had its HRC index […]
There are questions about potential manipulations of zinc and zinc trading which may have artificially inflated the metal’s price since 2010. Zinc, which is the metal used to coat galvanized steel as well as Galvalume, Galfan and ZAM, is believed to have been manipulated by The London Metal Exchange, Goldman Sachs, JP Morgan, Glencore Xstrata […]
Last week Steel Market Update conducted our mid-May flat rolled steel market analysis. We thought it would be interesting to compare what our respondents were thinking last week compared to the beginning of May regarding where hot rolled coil spot prices might be by the beginning of June. What our survey discovered was our respondents […]
For the week ending May 24, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,875,000 net tons (NT) of raw steel, 2.0 percent increase over the previous week and a 2.3 percent increase over the same week one year ago. The estimated capacity utilization rate is 78.0 percent, […]
The past couple of weeks have been a bit brutal for the US hot rolled coil (HRC) forward curve. While the spot market is appearing to run out of steam the HRC forward curve has broken down particularly the second half 2014 periods and calendar 2015 periods. May and June have withstood this recent selling […]
Even though there might be an air of expectation that flat rolled steel prices are going to drop, Steel Market Update continues to see a stingy domestic steel industry. Stingy in that they are not quick to give back the gains made over the past eight weeks. SMU noticed that Platts actually moved their hot […]
The psychological barrier has been broken! Iron ore spot prices broke below $100 for the first time this year as 62% Fe fines were reported to be $97.5 per dry metric ton (dmt) today according to The Steel Index. The $97.5/dmt number is the 52-week low with the high being $142.8/dmt. The last time iron […]
Iron ore spot prices in China have been falling and may continue to decline to the lows last seen in September 2012 when prices for 62% Fe fines reached into the $80’s (currently trading at $97.5/dmt). Steel Market Update has been reviewing the relationship between iron ore and ferrous scrap prices using shredded scrap as […]
For the week ending May 17, 2014, the American Iron & Steel Institute (AISI) reported that the U.S. steel industry produced 1,838,000 net tons (NT) of raw steel, a 0.3 percent decrease over the previous week but a 0.3 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.4 […]
The U.S. Department of Commerce released updated import license data through the 20th of May. If we remember, the license data through the 13th projected that we would see May imports surpass 4.0 million net tons and could go as high as 4.5 million tons. We discounted that number as we have seen previous month’s […]
Production in April on a tons/day basis was another all-time high at 4.574 million tonnes. The three month moving average (3MMA) of production in April was at an annual rate of 1.619 billion tonnes with a capacity utilization of 78.5 percent, also a 3MMA, (Figure 1). Capacity is now 2.076 billion tonnes. Table 1 shows […]
With the exception of plate, flat rolled steel prices either moved sideways or slightly lower based on the steel indexes followed by Steel Market Update. Prices appear to have peaked with benchmark hot rolled averaging $688 per ton, cold rolled $808 per ton, galvanized .060″ G90 $871 per ton and Galvalume .0142″ AZ50, Grade 80 […]
Steel Market Update was advised on Friday from one of our iron ore and steel trading sources in Asia that the Chinese export markets are in turmoil as spot iron ore prices drop, domestic (China) steel prices are dropping and export offers are being hit as well. On Friday of this past week The Steel […]
The following article is written by Andre Marshall, CEO of Crunch Risk LLC and the instructor for our brand new Managing Price Risk II: Strategies & Execution workshop. Every week we produce an article about futures trading and, in Andre’s case, about the broader financial markets. Andre begins with the a look at the financial […]
SteelBenchmarker released regional pricing earlier this week, putting the world export hot rolled price at $501 per net ton ($552 per metric ton). The spread between the SMU HR price and the world HR price went from $173 per ton two weeks ago to $184 as of Monday. With an estimated $70 per ton in […]
Steel Market Update published our special data on March steel imports which are produced by product (slabs, plate in coil, hot rolled, cold rolled, galvanized and Galvalume), by port of entry and by the country of origin. The full data is available for review by our Premium Level subscribers. Below is a portion of the […]
Both Industrial Production (IP) and Manufacturing Capacity Utilization are reported in the Federal Reserve G17 data base. The IP index was reported as 102.744 for April, with a three month moving average (3MMA) of 102.83. This was the fifth consecutive month for the index to exceed the pre-recession peak of September 2007. The 3MMA has […]
The Economic Policy Institute (EPI) and the law firm of Stewart and Stewart recently released its publication “Surging Steel Imports Put Up to Half a Million U.S. Jobs at Risk.” The publication was released in support of the domestic steel industry and their unions and contends that unfairly traded imports are costing the U.S. jobs […]
The finished steel stockists have been buying finished products the last two weeks. However, the stockists are still keeping very little inventory on a wait and see mode due to the iron ore price collapse (currently abt $102/dmt). The current finished product orders should keep the production smooth for the next 3 weeks in China. […]
Shipments of heating and cooling equipment, a benchmark for residential construction as well as the home improvement segments of the industry, have made significant improvements in the shipping rates compared to the same month one year ago. Below is the press release from the The Air-Conditioning, Heating, and Refrigeration Institute on heating and cooling equipment […]
U.S. and Canadian steel mills continue to keep a firm grip on pricing as supply (production) related problems keep lead times extended on most products. We are seeing the impact of foreign galvanized and Galvalume imports influencing at least one coated steel mill in the South. Domestic buyers appear to be accepting the higher prices […]
There will be a lot of news in the media today and tomorrow regarding foreign steel imports and their damage to the U.S. economy. We are seeing demonstrations across the country by union workers trying to influence policy and, particularly, the final determination of the OCTG dumping suits. Politicians are involved with Senator Sherrod Brown […]
The U.S. Department of Commerce released their latest imported steel license data for the month of May 2014. The early indication is for May steel imports to remain at, or above the projected April imports of 3.7 million tons. March final imports came in at 3.2 million which is also our 3 month moving average. […]
The supply of all steel products in Q1 2014 was up by 5.9 percent from Q1 last year. Flat rolled was up by 4.5 percent and longs were up by 9.8 percent. The sources of this analysis are the Commerce Department trade statistics and AISI steel shipment data.The bad news is that imports of all […]