On Monday, Dec. 21, Nucor notified customers of an upward revision to their galvanized steel coating extras, effective Feb. 6, 2021. Nucor is the third mill to revise their galvanized coating extras recently, following NLMK and CSI two weeks ago. SMU has done an analysis on the old and new extras, provided below. Nucor extras […]
Weekly raw steel production by U.S. mills totaled 1,619,00 net tons in the week ending Dec. 19, up from 1,567,000 net tons week on week. The operating rate was 73.2 percent, up 3.3 percent from 70.9 percent the week prior. The increase is likely a reflection of mills adding capacity, including U.S. Steel’s restart of […]
Weekly raw steel production by U.S. mills totaled 1,600,000 net tons in the week ending Dec. 26, down 1.2 percent from the prior week, most likely due to the holiday lull. The mill utilization rate was 72.3 percent, down from 73.2 percent the week before and 78.5 percent in the same week last year. Adjusted […]
Steel Market Update’s latest foreign vs. domestic hot rolled steel price comparison shows that, with U.S. HRC prices nearing $1,000 per ton, foreign imports theoretically have become cheaper than domestic steel prices. U.S. producers have lost their price advantage over HRC imports from Far East Asia by over $100 per ton, and imports from Germany […]
ArcelorMittal USA notified customers on Wednesday that it is increasing its base pricing for plate to a minimum of $900 per ton “in order to capture escalating costs and to restore the market value for steel plate products.” Now owned by Cleveland-Cliffs, ArcelorMittal USA no longer quotes delivered prices but rather the price ex works […]
By CRU Analyst Estelle Trans, from CRU’s Global Steel Trade Service U.S. buyers have been watching sheet steel prices skyrocket and found themselves weighing high-priced imports out of necessity. The steel market remains supply short, even with the restart of U.S. Steel Gary No. 4 this month, and market contacts expect that the market will […]
By CRU Principal Analyst Chris Asgill, from CRU’s Global Steel Trade Service Scrap prices have surged over the past month, with import prices up $50-90 /t m/m. Turkish prices have gained the most significant ground, though were below Asian prices a month ago. At the time of our assessment last week Turkish prices were approaching $400 /t […]
Steel Market Update is pleased to share the following Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. By CRU Principal Economist Alex Tuckett and Chief Economist Jumana Saleheen, from CRU’s Global Economic Outlook As the curtain falls on 2020, this overview looks back on the year […]
By CRU Principal Analyst Chris Asgill, from CRU’s Steelmaking Raw Materials Monitor Russia will impose tariffs of 5% ferrous scrap exports, with a minimum rate of €45 /t ($55 /t), for a period of six months. The country states that these are to protect the domestic metallurgical industry from supply shortages and high prices. As shown […]
The following article on the hot rolled coil (HRC), scrap and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot Rolled Hot rolled futures markets have experienced high velocity upward price moves along the futures curve in conjunction with spot over […]
By CRU Analyst Sam Grant It is now clear that Joe Biden will become the new president of the United States in January 2021, yet he will need control of the Senate to implement his economic policy agenda. As a result, the contest for two Senate seats in Georgia on Jan. 5 will be crucial. […]
Hot rolled steel prices have not yet hit $1,000 a ton, but they are not far behind. Buyers tell Steel Market Update they are seeing offers as high as $1,020 per ton, but no takers so far. SMU puts the average HR price at around $950 per ton, up substantially over last week as the […]
Nucor’s Plate Group notified customers of another increase in base prices on its plate products Monday, marking the fourth such announcement since late September. Nucor no longer quotes delivered prices, but rather base prices ex works the mill. Effective immediately Nucor’s EXW plate pricing is as follows: • As-rolled discrete/CTL grade A36 Base 3/8”-2”, $40.00/cwt […]
U.S. raw steel production rose 4.2 percent in October to 6,861,000 net tons, as reported by the American Iron and Steel Institute. AISI’s monthly raw steel production estimates are different than the weekly estimates SMU reports each Tuesday; the monthly estimates are based on over 75 percent of the domestic mills reporting versus only 50 […]
Weekly raw steel production by U.S. mills totaled 1,567,000 net tons in the week ending Dec. 12, down slightly from 1,579,000 week on week. The operating rate was 70.9 percent, down 0.8 percent from 71.4 percent the week prior, based on the American iron and Steel Institute’s calculations, which include idled capacity. Actually, despite the […]
How much higher can steel prices go? It’s impossible to know, but given the current lead times, level of demand and the support higher prices are getting from distribution, and it appears prices may have some more upside. Steel Market Update estimated the average HRC price this past week at $865 per ton, with reports […]
Commerce released final steel import data this week showing October imports totaling 1.51 million net tons, up 20 percent over the month prior. Although imports increased for the month, recall that September imports had fallen to an 11-year low or 1.26 million tons. November import licenses are currently at the 1.40 million ton level, but […]
We will welcome Spencer Johnson of StoneX next week as the guest speaker for our SMU Community Chat. The webinar will be held on Wednesday, Dec. 16, at 11 a.m. ET. The webinar is free to anyone who is interested in the flat rolled (and plate) steel markets, as well as those interested in the […]
Flat rolled and plate steel prices continue to be quite fluid based on the analysis of the data from Steel Market Update’s survey of the market this week, as well as individual channel checks with both buyers and sellers. By “fluid,” we mean we are capturing variances in prices over a short period of time. […]
On Monday, Dec. 7, both NLMK and California Steel Industries notified customers of an upward revision to their galvanized steel coating extras. A letter from CSI stated, “Due to changing zinc costs, our Galvanized Coating Extras have been revised. These changes will be effective January 2021.” NLMK and CSI are the first mills to revise […]
Iron ore surged in early-December as Vale’s lowered guidance fueled concerns about iron ore availability going into 2021. Short-term market tightness also contributed to the rise as Chinese demand remained strong, while seaborne supply has continued to struggle. On Tuesday, Dec. 8, CRU assessed the 62% Fe fines price at $147.0 /dmt, an increase of $15.5 /dmt […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor U.S. Steel announced the full buyout of Big River Steel this week, while Cleveland-Cliffs closed on its acquisition of ArcelorMittal’s U.S. assets. In any other week, these headlines would drive the news flow for steel buyers and sellers. However, news this week remains […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 20.2% m/m in December to 275.2. This large increase was driven by a rapid acceleration in global finished steel pricing. Even with this large m/m increase for December, we again expect metallics prices to rise in […]
By CRU Senior Analyst Erik Hedborg from CRU’s Steelmaking Raw Materials Monitor The iron ore price rally has continued in the past week as the market tightness worsened, with continued strong demand while seaborne supply has taken a major hit following the halting of operations at Australia’s two largest iron ore ports due to bad weather. […]
Canada’s Algoma Steel notified customers on Monday, Dec. 7, that, effective immediately, prices on spot orders for hot rolled and cold rolled sheet products will be increased by U.S. $60 per ton. Algoma reserves the right to review and requote any unconfirmed orders. Published extras will also be applicable with new orders. Algoma’s last price […]
Weekly raw steel production by U.S. mills totaled 1,579,000 net tons in the week ending Dec. 5. As expected, production increased by 1.2 percent after edging off slightly the week prior due to the Thanksgiving holiday break. The operating rate as a result rose to 71.4 percent, up from 70.6 percent the prior week. Even though present […]
Panelists in a webinar presented by the Alliance for American Manufacturing on Wednesday said an infrastructure bill and sensible trade policy should be top priorities for the new administration. Entitled “How Can President-Elect Joe Biden Build Back Better,” panel members discussed what the Biden administration will need to do to rebuild the economy. Rep. John Garamendi (D-CA) […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. David has over 20 years of trading experience in financial markets and has been active in the ferrous futures space for over eight years. You can learn more at www.thefeldstein.com or add him on twitter @TheFeldstein and on Instragram at #thefeldstein. During the […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. David has over 20 years of trading experience in financial markets and has been active in the ferrous futures space for over eight years. You can learn more at www.thefeldstein.com or add him on twitter @TheFeldstein and on Instragram at #thefeldstein. It now […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. David has over 20 years of trading experience in financial markets and has been active in the ferrous futures space for over eight years. You can learn more at www.thefeldstein.com or add him on twitter @TheFeldstein and on Instragram at #thefeldstein. For some […]