Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: Three items of interest for today, which will be expanded upon as events warrant: WTO Disputes on Section 232 Tariffs—At least two WTO members (the EU and Norway) requested formation of a dispute settlement panel […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: As we approach the 2018 mid-term elections in a bit more than two weeks, I checked on the available data on voter attitudes toward the tariffs and trade policy. There is a lot of information […]
With the market sending mixed signals, distributors of HVAC products are keeping inventories lean as they wait to see if the price increase just announced by the steel mills gains any traction. “You can make a case for prices to go either way,” said one member of the Heating, Air-conditioning and Refrigeration Distributors International (HARDI) […]
United Steelworkers at U.S. Steel have reached a tentative agreement on a four-year labor contract with the mill, avoiding a potential strike. USW officials said the contract will allow workers and management to move forward in a way “that allows us to share in the company’s success.” “The company came to the bargaining table this […]
How long will the Section 232 tariffs on steel and aluminum imports remain in place? There is no way to know for sure. But supporters, including various trade and government officials, make a strong case that the tariffs are likely to remain in force for some time to come. President Trump announced the 25 percent […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: A question came up this week about production and changing tariff codes for products to avoid or minimize tariffs. Understanding options depends on the issue of how tariff classifications are changed through processing. And if […]
The cost of many products used in construction climbed 7.4 percent over the past year due to double-digit increases in commonly used construction materials, according to an analysis by the Associated General Contractors of America of new Labor Department data. Association officials noted that the cost increases come as many construction firms are already grappling […]
Nucor’s Sheet Mill Group announced a $40 price hike this morning. In an Oct. 10 letter to customers, Nucor said that base prices on hot rolled, cold rolled and galvanized steel products would all increase by $40 per ton, effective immediately. The steel mills have been largely silent on price changes for the past few […]
We saw mixed results in the flat rolled markets this week. Benchmark hot rolled dropped $5 per ton compared to one week ago. Cold rolled was modestly higher ($5/ton), while galvanized and Galvalume were down $15 per ton. Plate prices remained intact with no change compared to one week ago. Here is how we see […]
Spot plate prices have not budged this week, according to the numerous data points received from both large and small plate buyers today. Our range is $980 to $1,030 per ton delivered with an average of $1,005 per ton. The domestic plate mills continue to be on “controlled order entry” (they don’t like the word […]
We had a bit of a split regarding service center spot prices in the analysis we did of the flat rolled steel markets last week. Manufacturing companies overwhelmingly reported their steel service center suppliers as dropping flat rolled steel spot prices compared to what they were seeing just a couple of weeks ago. On the […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: According to Robert Lighthizer, the U.S. Trade Representative, “we are sort of out of time” to negotiate including Canada in a revised NAFTA (the North American Free Trade Agreement). There are a few sticking points […]
Construction employment increased in 287 out of 358 metro areas (80 percent) between August 2017 and August 2018, declined in 35 (10 percent) and was unchanged in 36, according to a new analysis of federal employment data by the Associated General Contractors of America. “The increases in construction employment have been showing up in more […]
Ferrous scrap prices have been on the decline, but may find a bottom in October, as most Steel Market Update sources forecast flat to slightly higher pricing next month. CRU Steel Analyst Ryan McKinley reports that sentiment seems to be building for a “strong sideways” market in October. “If this play’s out, it will be […]
Steel Market Update will conduct one of our popular Steel 101: Introduction to Steel Making & Market Fundamentals workshops in Toledo, Ohio, on Dec. 11-12. We are working with North Star BlueScope, which will provide attendees with a tour of their electric arc furnace, caster and hot strip mill (all of the fun stuff). The […]
Forty-five states and the District of Columbia added construction jobs between August 2017 and August 2018, while 33 states added construction jobs between July and August, according to an analysis by the Associated General Contractors of America of data from the Labor Department. “Only three states experienced a decline in construction employment over the past […]
Construction employment increased by 23,000 jobs in September and by 315,000 jobs over the past year, reaching a 10-year high, while the industry’s unemployment rate decreased more than half a percentage point to 4.1 percent from a year earlier, according to an analysis of new government data by the Associated General Contractors of America. Even […]
Steel demand appears to be softening. Last week’s Steel Market Update’s Flat Rolled Market Trends questionnaire shows that far more buyers see declining than improving demand. While two out of three respondents report that demand is remaining steady, a significant and growing percentage (27 percent) say demand is declining. Only 7 percent report improving steel […]
The SMU Steel Buyers Sentiment Index has been treading water, albeit at optimistic levels, for the past six months. However, the attitudes of buyers and sellers about conditions in the steel market might be described as anywhere from cautious to tepid, judging by the comments provided in Steel Market Update’s latest Steel Buyers Sentiment Index […]
The United States’ Section 232 steel tariffs are adding to the government coffers as the increase in calculated duties on steel rose by 4,300 percent in second-quarter 2018. Earlier this week, Steel Market Update was asked if we knew how much revenue has been coming from the Section 232 tariffs on steel. We were intrigued […]
Steel Market Update saw slippage in the lower end of the ranges on hot rolled, cold rolled and Galvalume steel prices this week. Galvanized remained the same, as did plate. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $810-$890 per ton ($40.50/cwt-$44.50/cwt) with an average of $850 per […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: A rather eventful few days on the tariff and legal fronts: Final list of $200 billion in trade value of imports from China: The USTR announced the final list (“list 3”) of $200 billion in […]
Distributors of products for the HVAC sector are keeping a tight rein on inventories as pricing for galvanized steel continues to weaken. The wholesalers are seeing pressure from customers postponing orders in anticipation of better prices down the road. “It appears customers are living hand to mouth, waiting to place any large orders until they […]
Steel Market Update was speaking with one of the plate mills regarding their maintenance schedules and order books, which we reported on in Thursday evening’s issue of our SMU newsletter. During the conversation, there was a discussion about what was causing the tightness in the marketplace, and the mill mentioned the drastically lower plate imports […]
Major leading economic indicators are all telling the same story—that U.S. economic growth is slowing, with little effect likely from the Trump administration tax cut, reported economist Alan Beaulieu of ITR Economics in his remarks Aug. 29 at the Steel Market Update steel summit in Atlanta. While an average GDP growth of 2.6 percent in […]
Each month, Steel Market Update produces an import analysis by region for two of the six flat rolled product groups (HRC, CRC, HGD, OMC, CTL plate and coiled plate). This month, we are focusing on plate products. The intent of these regional updates is to bridge the gap between our monthly licensed data summaries and […]
Each month, Steel Market Update produces an import analysis by region for two of the six flat rolled product groups (HRC, CRC, HGD, OMC, CTL plate and coiled plate). This month, we are focusing on plate products. The intent of these regional updates is to bridge the gap between our monthly licensed data summaries and […]
Both the plate mills and their customers are advising Steel Market Update that, unlike the hot rolled markets, the plate markets are hot and are expected to continue to be hot for some time to come. The plate mills continue to be on “controlled order entry” (allocation) and all of the mills are struggling to […]
Ferrous scrap prices in most regions have settled down by $20 to $30 per ton in September and could fall further in October as mills schedule maintenance outages, report some Steel Market Update sources. Others believe stronger export demand could help sustain prices next month. Prime grades declined by $20, while obsoletes dipped a bit […]
Steel Market Update steel training workshops continue to be very popular. We are finding many companies sending their new people to our flagship Steel 101 workshop. This workshop is excellent for those new to the industry; however, it is not just for new employees. It is an excellent way to expand the knowledge base of […]