Employment gains have slowed each month since June, and after a marginal increase in November, December employment numbers retracted for the first time since March, according to Steel Market Update’s latest analysis of the U.S. Bureau of Labor Statistics (BLS) data. The net change in employed persons in December was a negative 140,000, following a disappointing […]
Overall, steel product shipments continued to improve through November, reporting an increase for the seventh consecutive month. Despite the gains, the improvement continues at a slower pace than the overall manufacturing economy. The market is still working to recover from the initial effects of the Covid-19 shutdowns back in April. As a result, despite the steady […]
This report examines the import share of sheet, plate, long and tubular products. As of October 2020, imports’ share of total sheet products was 11.8 percent, down from 16.6 percent in May and from a recent high of 22.9 percent in 2015. The import share of HRC has been below 10 percent since January 2019, […]
Weekly raw steel production by U.S. mills totaled 1,650,000 net tons in the week ending Jan. 2, up 3.1 percent from the week before, which saw some slowing due to the holiday. The average mill utilization rate rose to 74.6 percent, up from 72.3 percent the week prior. Production in the last week of 2020 […]
This report is an analysis of Bureau of Labor Statistics data and is intended to provide subscribers with a view of the competitive position of sheet steel, aluminum, plastic and wood. The analysis includes some downstream products and a comparison of truck and rail transportation. On Dec. 10, the BLS released its series of Producer […]
Weekly raw steel production by U.S. mills totaled 1,619,00 net tons in the week ending Dec. 19, up from 1,567,000 net tons week on week. The operating rate was 73.2 percent, up 3.3 percent from 70.9 percent the week prior. The increase is likely a reflection of mills adding capacity, including U.S. Steel’s restart of […]
Weekly raw steel production by U.S. mills totaled 1,600,000 net tons in the week ending Dec. 26, down 1.2 percent from the prior week, most likely due to the holiday lull. The mill utilization rate was 72.3 percent, down from 73.2 percent the week before and 78.5 percent in the same week last year. Adjusted […]
After reaching bottom in June, due largely to the global pandemic, mill shipments and supply of sheet products have since maintained a slow but steady upward trajectory. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce. The analysis […]
Weekly raw steel production by U.S. mills totaled 1,567,000 net tons in the week ending Dec. 12, down slightly from 1,579,000 week on week. The operating rate was 70.9 percent, down 0.8 percent from 71.4 percent the week prior, based on the American iron and Steel Institute’s calculations, which include idled capacity. Actually, despite the […]
Downstream steel product shipments continue to improve, though slower than the overall manufacturing economy. The fallout driven by the first wave of the global pandemic back in April is still evident in the data despite the steady rebound. The Census Bureau provides monthly data on inventories, shipments and new orders for total U.S. manufacturing and […]
Weekly raw steel production by U.S. mills totaled 1,579,000 net tons in the week ending Dec. 5. As expected, production increased by 1.2 percent after edging off slightly the week prior due to the Thanksgiving holiday break. The operating rate as a result rose to 71.4 percent, up from 70.6 percent the prior week. Even though present […]
Weekly raw steel production by U.S. mills totaled 1,561,000 net tons in the week ending Nov. 28, while the average operating rate was 70.6 percent. Production declined by 1.3 percent from the week prior, likely due to the holiday break. Present capacity utilization represents a 14.4 percent decrease from the same period last year when […]
Weekly raw steel production by U.S. mills totaled 1,582,000 net tons in the week ending Nov. 21. The operating rate was a fraction higher than the prior week at 71.5 percent. Despite the steady increase in production through much of 2020, the latest week’s output remains 13.2 percent behind the same week last year when the […]
Raw steel production by U.S. mills increased by 7,000 net tons last week. In the week ending Nov. 14, domestic steel production totaled 1,580,000 net tons, pushing the average industry capacity utilization rate up slightly to 71.4 percent. Although production continues on a slow upward trajectory, it remains 13.3 percent below the same week last year when the operating rate was […]
Editor’s note 11/17/20: The data in the “Supply Tons YTD” column on Table 3 didn’t populate correctly, and therefore, was in error. Table 3 has now been updated accordingly. Mill shipments and supply of sheet products continue to see slight yet steady growth since reaching bottom in June. This analysis is based on steel mill […]
Weekly raw steel production by U.S. mills continues to climb, a trend that started back in May. In the week ending Nov. 7, raw steel production totaled 1,573,000 net tons. The capacity utilization rate rose to 71.1 percent, up from 70.0 percent the week prior. Despite the steady rise in output, the current week’s production represents […]
After declining drastically earlier in the year due to the onset of COVID-19, U.S. consumer confidence has improved, but still has a way to go. Following increases in August and September, the composite value of consumer confidence, as reported by The Conference Board, slipped slightly in October to 100.9, down from 101.8 the month prior. […]
Domestic mills continue to increase steel production as the economy rebounds from the coronavirus, with the capacity utilization rate topping 70 percent again for the first time since late-March. In the week ending Oct. 31, raw steel production totaled 1,557,000 net tons, at a mill operating rate of 70.4 percent, up from 69.7 percent the […]
Editor’s note 11/3/20: Some of the data as originally published in Table 1 was incorrect due to a spreadsheet error (specifically the change in shipments 3M Y/Y column). The table has been updated with the correct information below. Mill shipments and supply of sheet products have turned, albeit slightly, since reaching bottom in […]
Raw steel production by U.S. mills rose again by 2.2 percent to 1,535,000 net tons in the week ending Oct. 17, continuing an uptrend that began nearly five months ago. The mill operating rate hit 69.4 percent, up from 67.9 percent the week prior. Despite the repeated rise in capacity utilization, production was still down by 15.0 percent […]
With early voting underway, record breaking mail-in ballots, and a final voting date a mere 14 days away, it is safe to say that much is riding on the upcoming U.S. presidential election. With two candidates who share little common ground in a bitter election battle, it’s clear that a shift in presidential administration will […]
Raw steel production by U.S. mills rose another 1.2 percent in the week ending Oct. 10 to 1,502,000 net tons, the 16th increase in the last 18 weeks. The operating rate reached 67.9 percent last week, up from 66.6 percent the week prior. Even though production has experienced steady increases, mill output was still 16.8 percent below levels of […]
The following report was done by David Schollaert, the new analyst at Steel Market Update. He was asked to take a look at past market trends and to lay out scenarios for future trends. Obviously, there are black swan events (such as the Section 232 tariffs) which can push a market in one direction much […]
Raw steel production by U.S. mills increased 0.3 percent in the week ending Oct. 3 to 1,484,000 net tons, another small sign of rising steel demand. The operating rate of 66.6 percent was up from 66.1 percent the week prior. Although domestic production has seen steady gains since April, last week’s output was still 17.7 percent […]
U.S. consumer confidence has suffered drastically from the pandemic, but has shown some positive signs of late. The composite value of consumer confidence in September, reported by The Conference Board, was 101.8, surpassing the 100 mark for the first time since March 2020. The three-month moving average (3MMA) moved up to 93.3. Despite the increase, the […]
Steel prices continued their upward trajectory in September as demand rose further and mills announced more increases on hot rolled, cold rolled and galvanized products. Steel Market Update’s hot rolled price averaged $568 per ton in September, an increase of more than $100 month/month, and has since topped the $600 mark. Average prices for prime […]
Looking at the month-on-month changes in steelmaking raw materials costs, the prices of iron ore, pig iron and zinc have continued to experience noticeable gains, a pattern seen since the beginning of Q3 2020. As expected, scrap prices have bounced back after the downturn seen in the summer months, providing support to higher finished steel […]
Chicago-based service center and steel processor UPG Enterprises LLC, announced the acquisition of Lex Holding Co. The acquisition will expand UPG’s distribution of flat rolled steel products in the Midwest markets and further diversify their product line and logistical capabilities. The deal includes Lexington Steel Corp., a full-line distributor of flat rolled steel products based in Chicago […]
Importers of steel and aluminum who have been critical of the Commerce Department’s handling of Section 232 exclusion requests have found an ally in the Government Accountability Office. In a report released Tuesday, the GAO called for Commerce to improve and speed up the process it uses to review tariff exclusion requests. The report noted […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Following is an analysis of Bureau of Labor Statistics (BLS) Producer Price Index data. The PPI is a family of indexes that measure the average change over time in the prices received […]