Steel imports in May increased 7.4 percent from April to 4 million net tons, a 41.5 percent increase over May imports in 2013. The year-to-date total is now 17.5 million net tons, 31.7 percent higher than the same period last year. Steel imports have been a headline issue for the steel industry in the last […]
Steel imports in May increased 7.4 percent from April to 4 million net tons, a 41.5 percent increase over May imports in 2013. The year-to-date total is now 17.5 million net tons, 31.7 percent higher than the same period last year. Steel imports have been a headline issue for the steel industry in the last […]
US Steel says it will indefinitely idle two tubular manufacturing facilities in McKeesport, Pennsylvania and Bellville, Texas in early August. US Steel reported that the decision is a result of poor business conditions due to unfairly traded tubular steel products imported into the United States. The shutdown of the two facilities will impact approximately 415,000 […]
Steel imports to the U.S. totaled 3.7 million net tons according to preliminary data from the US Census Bureau but the reaction to this data depends on one’s point of view. The American Institute for International Steel (AIIS) and the American Iron and Steel Institute (AISI) both came out with reports on April imports, but […]
Apparent supply is defined as domestic mill shipments to domestic locations plus imports. Sources are the American Iron and Steel Institute and the Department of Commerce. The three month moving average of the total tonnage of sheet and strip supply in the 1st quarter was 4,603,548 tons, up from 4,426,649 tons per month in Q4 […]
Mike Rippey, president and CEO of ArcelorMittal USA, has been elected Chairman of the American Iron and Steel Institute (AISI). Rippey will serve as chairman until May 2015, leading advocacy efforts on behalf of AISI and the industry to advance pro-manufacturing polices that will enhance the competitiveness of the North American steel industry. “Mike’s been a strong […]
According to the American Iron and Steel Institute (AISI) domestic raw steel production totaled 8,273,082 net tons (all products). Of the total 60 percent was produced by electric arc furnaces and the balance by blast/BOF furnaces. Carbon steel products totaled 7,681,790 net tons with 4,665,056 tons being produced by EAF’s and the balance, 3,016,734 tons […]
The American Iron and Steel Institute (AISI) commented on a report released earlier today by the Center for American Progress (CAP) regarding China’s Economic Reform. The AISI stated that CAP’s article indicates that economic reforms announced by Chinese leadership last fall will do nothing to mitigate China’s state-ownership and control over key industrial sectors, including […]
According to the American Iron and Steel Institute (AISI) domestic raw steel production totaled 8,273,082 net tons (all products). Of the total 60 percent was produced by electric arc furnaces and the balance by blast/BOF furnaces. Carbon steel products totaled 7,681,790 net tons with 4,665,056 tons being produced by EAF’s and the balance, 3,016,734 tons […]
Steel producers and distributors can expect an influx of orders for steel plate for rail tank cars in the next several years. After several serious tanker accidents involving crude oil transport, the Association of American Railroads Tank Car Committee (AARTCC) and Railway Supply Institute Committee on Tank Cars (RSICTC) have each submitted higher safety standard […]
The American Iron and Steel Institute (AISI) today lauded the decision by the World Trade Organization (WTO) to side with the U.S. on a challenge to China’s export restrictions on rare earth elements, tungsten and molybdenum. Rare earths and other products are used in smartphones, automobiles, the defense industry, and wind turbines and are mined […]
Steel industry leaders met with members of the Congressional Steel Caucus this morning (March 25, 2014) to discuss the need for policy reform on trade, energy, environment and infrastructure in order to keep US industries competitive. SMU has reprinted the short version of the American Iron and Steel Institute press release below. The full testimonies […]
The US Department of Commerce said it will maintain anti-dumping and countervailing duties on oil country tubular goods (OCTG) imported from China, in announcement made earlier this month (February). The recent decision closed loopholes in the 2009 AD/CV duties imposed by the International Trade Commission, which allowed pipe made in China but finished in other […]
The US Department of Commerce said it will maintain anti-dumping and countervailing duties on oil country tubular goods (OCTG) imported from China, in announcement made earlier this week. The recent decision closed loopholes in the 2009 AD/CV duties imposed by the International Trade Commission, which allowed pipe made in China but finished in other countries […]
Apparent supply is defined as domestic mill shipments to domestic locations plus imports. Sources are the American Iron and Steel Institute and the Department of Commerce. The three month moving average of the total tonnage of sheet and strip supply was 4,436,772 tons per month in the period September through November. This was up by […]
At the end of 2013, David Phelps retired as president of the American Institute for International Steel (AIIS) and has just joined Steel Market Update as a contributing writer. Mr. Phelps will be writing about topics concerning the steel industry – particularly in the area of imports and foreign steel. Steel Market Update had a […]
The American Iron and Steel Institute (AISI) released data earlier this week for net shipments of steel mill products for the month of November. Total shipments for the month were reported to be 7,604,428 net tons (NT), down 8.2 percent from October tonnage but up 2.8 percent from November 2012. YTD tonnage through November was […]
Apparent supply is defined as domestic mill shipments to domestic locations plus imports. Sources are the American Iron and Steel Institute and the Department of Commerce. The three month moving average (3MMA) of the total tonnage of flat rolled sheet and strip supply was 4,469,473 tons per month in the period July through September. This […]
WASHINGTON, D.C. – The American Iron and Steel Institute (AISI) reported today that for the month of September 2013, U.S. steel mills shipped 7,879,747 net tons, a 5.6 percent decrease from the 8,343,075 net tons shipped in the previous month , August 2013, and a 8.9 percent increase from the 7,233,375 net tons shipped in […]
CHICAGO — The Association of Steel Distributors (ASD) recently honored James L. Wainscott, chairman, president and CEO of AK Steel, with the 2013 Captain of Industry award. The award, which was presented at the ASD Annual Fall Conference and is one of the highest honors in the steel industry, is presented to individuals who have […]
AK Steel announced the election Mark G. Essig and Vicente Wright to its Board of Directors effective Nov. 1, 2013. Mark Essig is currently CEO of FKI Security group and has held several senior executive positions in the steel industry including executive vice president at AK Steel from 1991 to 1998. Vicente Wright served as […]
WASHINGTON, D.C., September 11, 2013 – Four key trade associations representing the steel stud industry have joined together to promote the use of cold-formed steel framing in construction. Representatives from the Steel Stud Manufacturers Association (SSMA); the Steel Framing Industry Association (SFIA); the Certified Steel Stud Association (CSSA); and the Steel Market Development Institute (SMDI), […]
Apparent steel supply is defined as domestic mill shipments to domestic locations plus imports. Sources are the American Iron and Steel Institute and the Department of Commerce. The three month moving average (3MMA) of the total tonnage of flat rolled steel sheet and strip supply was 4,305,106 tons per month in the period May through […]
A Game Changer for the Domestic Steel Industry? The OCTG trade injury cases filed against nine countries will go forward said the US International Trade Commission on Friday. The ITC found there is “reasonable indication that a U.S. industry is materially injured by imports of certain oil country tubular goods.” The preliminary countervailing duty determinations […]
House Subcommittee Presentations The American Iron and Steel Institute made its presence known last week on Capitol Hill. Top steel executives encouraged members of the House Energy and Commerce subcommittee on Commerce, Manufacturing and Trade to remedy government policies on tax, energy, infrastructure, environment and trade to strengthen American jobs in steel and other manufacturing […]
Written by: John Packard & Sandy Williams Steel Market Update is adding more strength to our newsletter and website team. Peter Wright will be joining SMU in a writing/analysis capacity with special emphasis on the development of steel and economic indicators which will be of value in forecasting future steel needs in both the flat […]
Written by: Sandy Williams The American Iron and Steel Institute commended Ambassador Ron Kirk for his cooperation with the steel industry during his four years of tenure in the Administration. AISI President and CEO Tom Gibson issued the following statement. “Ambassador Kirk is a dedicated public servant who helped lead U.S. trade policy at a […]
Written by: Sandy Williams Natural gas is providing cost savings for steel plants while at the same time creating more demand for steel products used in pipelines, drilling equipment and rigs. It is a win-win situation for the steel and the natural gas industries One of the ways natural gas is utilized by the steel […]
Based on the raw steel capability adjustment which was made by the American Iron and Steel Institute (AISI) as of the beginning of this year, SMU is adjusting the way we will present our visual data to our readers. We will begin to compare weekly production against the “revised” weekly production number from the comparable […]
The American Iron and Steel Institute (AISI) adjusted their first quarter production rate for the domestic steel industry. In a note attached to their press release they advised: “Note: Capability for the First Quarter 2013 is approximately 30.8 million tons versus 32.3 million tons for the same period last year and 32.7 million tons for […]