On Wednesday morning SSAB informed their customers of their intention to increase transaction prices by $50 per ton ($2.50/cwt) “effective immediately on all new non-contract orders.” Later in the day Nucor Plate Mill Group followed the SSAB lead and also increased their spot prices on carbon, alloy and heat-treated plate by $50 per ton. Where […]
The Association of Women in the Metal Industries has elected a new President and Vice-President for 2017-2018. The election was held during the Association’s 2016 Annual Conference held in Florida in November. The positions are for a term of two years. The following roles were announced in a press release from AWMI. Carol Chizmar has […]
On Wednesday SSAB, Nucor and ArcelorMittal USA all announced a $40 per ton price increase on plate products. In a letter emailed to their customers Nucor advised of their intention to increase plate prices with: Effective immediately, the Nucor Plate Mill Group will increase transaction prices on all new orders for carbon, alloy and heat-treated […]
Wilbur Ross Jr. has been tapped by President-elect Donald Trump to serve as Commerce Secretary. Ross is a billionaire investor known as the “bankruptcy king.” Forbes estimates the Ross fortune at $2.9 billion made by buying and restructuring troubled companies. One of those companies was Donald Trump’s bankrupt casino in the 1990s. Ross was a […]
Late in the day on Wednesday, Nucor and NLMK USA advised their customers of their intention to raise spot flat rolled prices by an additional $40 per ton. This follows ArcelorMittal’s announcement on Tuesday of specific minimum base price levels of $600 per ton hot rolled, $820 per ton cold rolled and coated steel products […]
The Department of Commerce has announced its affirmative final determinations in the antidumping investigations of imports of steel cut-to-length plate from Brazil, South Africa and Turkey. Brazil mandatory respondents were assigned dumping margins of 74.52 percent based on adverse facts for failure to cooperate in the investigation. All other producers and exporters in Brazil will […]
Today ArcelorMittal USA announced new minimum base price levels for orders of hot rolled, cold rolled and coated products. This is the 4th flat rolled steel price announcement since late October. The announcement takes base prices to the following minimum levels: Hot Rolled = $600 per ton ($30.00/cwt) Cold Rolled = $820 per ton ($41.00/cwt) […]
Steel Market Update (SMU) spend the last 24 hours researching the flat rolled steel markets in an effort to come to a resolution on what the price spread is on hot rolled, cold rolled, galvanized and Galvalume steels. We found about 90-95 percent of the buyers reporting the domestic steel mills as “firm” in their […]
Steel Market Update went out to a couple of hundred steel buyers and executives today as we probe for information about flat rolled steel prices. At the same time we asked questions about price direction and demand. Tonight we will cover price direction (prior to AM increase announcement) and on Thursday we will cover their […]
There has been a great deal of discussion on how the Trump administration will affect manufacturing and the steel industry in the coming months. Steel Market Update asked AISI and domestic steel mills what regulations they would like to see repealed under the new administration and what kind of environment for steel and manufacturing they […]
As of late this afternoon www.Kitco.com was reporting zinc spot pricing around $1.22 per pound. Zinc recently reported prices not seen in the past 9 years and those of you buying galvanized and Galvalume steels need to be aware of how zinc is trading. The U.S. steel mills published new extras just as zinc pierced […]
Flat rolled steel prices shot up this week in response to two price increase announcements within the past 8 days. ArcelorMittal provided base price guidance on Monday for $560 for hot rolled ($28.00/cwt) and $780 base on cold rolled and coated ($39.00/cwt). A number of mills followed with some announcing $30-$40 per ton and others […]
On Monday ArcelorMittal USA announced their third flat rolled steel price increase in less than a month. The mill informed their customers of their intention to raise base prices on all flat rolled products. On Tuesday NLMK USA followed the AM lead while Nucor and AK Steel came out with a $40 per ton price […]
Is everyone strapped in? The rollercoaster is clearly on the way back up and the question today is will benchmark hot rolled exceed the previous cycle highs of $635 per ton ($31.75/cwt) set in mid-June 2016? Flat rolled steel indexes followed by Steel Market Update recorded higher average pricing on hot rolled, cold rolled, galvanized, […]
Once per month HARDI* wholesalers conduct a galvanized steel conference call so they can better understand what is happening in the broader markets as they deal with steel pricing, demand and inventory issues. The HARDI monthly call was held on Wednesday, November 9, just one day after the presidential election. Not surprisingly, the future of […]
Nucor Plate Mill Group was the first of the plate mills to reach out to their customers and advise them of their intention to take plate prices up by $50 per ton. On Tuesday of this week, Nucor sent a letter via email to their customers stating, “Due to current market dynamics, plate pricing has […]
On Wednesday of this week I participated in the monthly HARDI conference call (see article in tonight’s newsletter). During the call one of the executives from an east coast HVAC wholesaler told the group that he didn’t believe prices could or would move much higher from here. I disagreed with him. One of the justifications […]
Steel buyers and steel mill sellers are beginning to come to the same conclusion, the steel mills have the momentum and flat rolled steel prices are beginning to rise. What may be surprising steel buyers, especially those who do not read publications like Steel Market Update, is the pace and the strength of the market […]
On Monday, November 7, 2016 ArcelorMittal USA began advising their customers of their intention of raising steel base prices to specific minimum levels. The announcement came from an internal memo (or email from the various sales representatives of the mill) which stated, “Effective immediately, the following minimum base prices will be applicable to all new […]
After ArcelorMittal USA announced specific minimum base price levels on Monday we had three steel mills come out with flat rolled steel price announcements on Tuesday. However, none of the mills advised of specific base price levels but rather announced dollar per ton increases. The three mills are Nucor, AK Steel and NLMK USA. Nucor […]
On Monday the U.S. Department of Commerce initiated an investigation against China for trying to circumvent antidumping and countervailing duty orders. The DOC was responding to petitions filed by the domestic steel industry on cold rolled. The DOC also initiated an investigation on CORE (corrosion resistant) which SMU will cover in a separate article. There […]
On Monday the U.S. Department of Commerce, responding to petitions from ArcelorMittal, Nucor, US Steel, AK Steel, Steel Dynamics and California Steel, initiated an inquiry of circumvention of the antidumping (AD) and countervailing duty (CVD) orders against China. The probe will be for hot rolled and cold rolled substrate supplied by China to Vietnam for […]
ArcelorMittal posted net income of $680 million for third quarter 2016. Steel shipments totaled 20.3 million tonnes, down from 22.1 million tonnes in second quarter and 21.1 million tonnes in Q3 2015. Crude steel production in the NAFTA segment decreased 1.8 percent sequentially to 5.6 million tonnes in third quarter. The NAFTA segment includes the […]
(ArcelorMittal press release, 8 November 2016) – ArcelorMittal is expanding its global portfolio of automotive steels by introducing a new generation of advanced high strength steels (AHSS). These innovative steels include the launch of new press hardenable steels (PHS) Ductibor® 1000 and Usibor® 2000 – both of which are already available for OEM qualification testing […]
On Thursday (October 27, 2016) Cliffs Natural Resources conducted their 3rd Quarter 2016 earnings conference call with analysts. During the call Cliffs CEO Lourenco Goncalves made statements regarding steel service centers which he reported as importing “illegal steel,” thus hurting the domestic steel industry. He also pointed out that service center inventories were “dangerously low” […]
On Friday morning US Steel got the ball rolling by announcing a $30 per ton price increase on all spot sales of flat rolled steel (hot rolled, cold rolled and coated products). Before the afternoon was out two other steel mills followed: Nucor and California Steel Industries. On Monday a number of mills were heard […]
On Friday morning US Steel became the first domestic steel producer to announce a flat rolled steel price increase. Later in the day Nucor and California Steel Industries (CSI) followed with similar announcements. SMU expects other steel mills to follow with announcements of their own as this new week gets underway. On October 21, 2016 […]
The final three holdouts in the Standard Iron Works v. ArcelorMittal et al. antitrust litigation have come to a settlement. Steel Dynamics, Nucor and SSAB have agreed to settle price-fixing claims for a combined total of $30 million. Steel Dynamics issued an announcement on Tuesday that it will pay $4.6 million in the class action […]
The conversation has begun regarding when flat rolled steel prices will end their slide and reverse course. Flat rolled steel prices have been in a steep decline since mid-June 2016 when benchmark hot rolled prices peaked at $635 per ton ($31.75/cwt, SMU index average) FOB domestic mill. Since then steel prices have retreated $145 per […]
The Vietnam steel industry is between the proverbial rock and hard place. U.S. steel manufacturers claim that Vietnamese exporters are party to China’s circumvention of antidumping and countervailing duties on cold rolled steel and are calling for AD duties to match those on China products. Vietnam’s influx of Chinese steel is also a concern for […]