Construction spending slowed in December, but contractors remain optimistic about new projects for 2020. Construction spending dipped 0.2 percent from November to December due to a decline in nonresidential project spending. A 1.4 percent jump in private residential spending, supported by a 2.7 percent increase in single-family home construction, failed to offset a decline in […]
U.S. Steel reported a net loss of $680 million for the fourth quarter of 2019 and a loss of $642 million for the year, but counts the quarter a success by exceeding its previously lowered Q4 expectations. The steelmaker sees last year as one of notable strategic progress. Sales for the year totaled $12.9 billion, […]
Both steel and scrap prices increased in the month of January, raising with them optimism levels over market conditions one month into the new year. The average price for hot rolled steel rose by about $30 per ton in January. The benchmark price for hot rolled peaked at $610 per ton in mid-January, but ended the […]
Key Market Indicators show that the improvement in market trends that occurred in December continued into January. This report is designed to be a big picture summary of data SMU has reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for […]
It’s Super Bowl Sunday! I will try to keep my comments short so we can all enjoy the game and worry about the steel markets in the morning. On Thursday and Friday of this past week I was in Ponte Vedra, Fla., as I was speaking to the Steel Manufacturers Association. The SMA are the […]
Demand is looking good for the steel industry this year, especially in the construction sector, said panel members on the Steel Manufacturers Association media call today. Dave Sumoski, Nucor Executive Vice President – Merchant and Rebar Products, noted that construction is a major area for Nucor. The market for steel bar is very strong with […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
By Principal Analyst James Campbell, from CRU’s Steel Plate Products Market Outlook The coronavirus outbreak in Wuhan has led to Chinese New Year holidays being extended and transportation restrictions introduced in order to contain the spread of the virus. Steel demand is normally weak during this period, but production continues as usual. Every day of […]
The U.S. Bank Freight Payment Index, a quarterly analysis of freight volumes and spending, fell 4.0 percent in the fourth quarter after gaining a total of 10 percent in the second and third quarters. Both volumes and spending dropped during the quarter due to weaker economic activity and impacts from the international trade market. The […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The presidential proclamation announcing new tariffs on “derivative” steel and aluminum articles was published in the Jan. 29 Federal Register (85 Fed. Reg. 5281). There are two Annexes that detail the products covered by the new tariffs: 1. “Aluminum […]
Nucor beat analysts’ estimates for the fourth quarter, reporting net earnings of $107.8 million due to an unexpected surge in sales during December. “Stronger than expected steel mill segment performance in December was the primary driver for higher actual fourth-quarter earnings than we indicated in our mid-December quantitative guidance,” said Leon Topalian, Nucor’s new president […]
By CRU Chief Economist Jumana Saleheen Given the importance of China to our industry, this Insight sets out the potential impact of the Wuhan coronavirus on commodity markets. Using the SARS episode as a benchmark, the impact on Chinese GDP and industrial production could be as large as 1 percent—but that estimate comes with a […]
SSAB Americas posted a loss of $23 million (-222 million SEK) for the fourth quarter of 2019 due to lower realized steel prices and maintenance costs associated with a planned outage in Mobile, Ala. Heavy plate demand was good in the first half of the year, but weakened in the fourth quarter due to inventory […]
The Department of Commerce announced the affirmative final determinations in the antidumping duty and countervailing duty investigations of imports of fabricated structural steel from Canada (AD only), China and Mexico, and a negative final determination in the CVD investigation of FSS from Canada. Canada and Mexico have been assigned antidumping rates of 6.7 percent and […]
New home sales were essentially flat in December, edging down 0.4 percent from November to a seasonally adjusted annual rate of 694,000, according the latest data by the U.S. Census Bureau and the Department of Housing and Urban Development. Compared to December 2018, sales increased 23.0 percent. Sales for the full year, however, rose 10 […]
Prices of all five of the raw materials considered in this report advanced in the last month. Table 1 summarizes the price changes through Jan. 22 of the five materials considered in this analysis. It reports the month/month, 3 months/3 months and 12 months/12 months changes on a percentage basis. All five materials had a […]
Steel buyers sentiment continued to improve through mid-January with Steel Market Update’s Current Sentiment Index registering +63, its highest reading since November 2018. Sentiment has been on the rise since October when it hit a low of +26, its most pessimistic reading since June 2013. (Historical low was in March 2009 when it hit -85.) […]
The construction industry added jobs in 34 states and D.C. between December 2018 and December 2019, and 29 states added construction jobs in December, according to an analysis by the Associated General Contractors of America of Labor Department data. Contractors say more jobs will be added to payrolls in 2020, but 81 percent of firms […]
Steel Dynamics reported record steel shipments of 10.8 million tons and net sales of $10.5 billion in 2019 for the company’s second-best sales performance. Steel fabrication also set a yearly record with shipments of 644,000 tons, and almost doubled its operating income from 2018. Sales declined 11 percent to $11.5 billion from the record high […]
The Architecture Billings Index rose for the third month in a row reaching 52.5 in December, according to the latest report by the American Institute of Architects. A reading above 50 indicates an increase in design services by architecture firms. Indices for new project inquiries and design contracts were positive, at 58.7 and 53.4, respectively. […]
I have been spending time looking at market momentum, lead times (real, not from our survey), who is buying and who is not (and why), and what the market should be concentrating on over the next couple of months (not just today). I am going to start with comments I got from a couple of […]
By CRU Analyst Chris Bandmann, from CRU’s Steel Long Products Monitor Europe: Germany has not seen any significant snowfall yet this winter, and these mild conditions had the potential to support the continuation of construction activities. Construction companies entered their holidays regardless, however, and steel demand has settled into a seasonal low point. Even so, […]
Chinese mills cranked out a record 996.3 million tons of steel last year—just short of a billion tons—an 8.3 percent increase from 2018, according to Chinese government data. Higher steel consumption reportedly was driven by increased property construction and government spending on infrastructure. Crude steel production in December totaled 84.3 million tons, an 11.6 percent […]
The composite producer price index of commodities peaked in October 2018, then through December 2019 declined by 2.6 percent. This Steel Market Update report is an analysis of Bureau of Labor Statistics data and is intended to provide subscribers with a view of the competitive position of sheet steel, aluminum, plastic and wood. The analysis […]
Housing starts jumped 16.9 percent from November to December to a seasonally adjusted annual rate of 1,608,000. Compared to a year ago starts soared 40.8 percent. Single-family starts increased 11.2 percent, while construction with five units or more leapt 32 percent. Starts were strongest in the Midwest and Northeast, increasing 37.3 percent and 25.5 percent […]
The wind energy industry received a boost from a U.S. spending bill approved in December. The bill extends energy tax credits for wind, solar and other green energy projects to 2024. Due to the extension, IHS Markit is now expecting a boom rather than a decline for the industry in 2020. The extension increased the […]
American business is facing a year of opportunity and uncertainty, says U.S. Chamber of Commerce CEO Thomas Donohue. In an address on the State of American Business, Donahue points to a “patchwork” of state rules and regulations that will stifle the free flow of goods and services if left unchecked. Data privacy is one example […]
Contractors are confident there will be plenty of construction projects in 2020 but are struggling to find qualified workers to hire. Construction employment increased by 20,000 jobs in December and by 151,000, or 2.0 percent, in all of 2019, says an analysis of new government data by the Associated General Contractors of America. “More than […]
The number of jobs created in December declined from the excellent November result on a seasonally adjusted basis. Net job creation in December declined to 145,000 from November’s exceptional result of 256,000. October and November were both revised down by 10,000. Rising employment and wages are the main contributors to GDP growth because personal consumption […]
Job creation decline by 21.3 percent in 2019, compared with 2018, according to Bureau of Labor Statistics data. The December employment reports were delayed by a week due to the holidays. In December, 20,000 jobs were created in construction and 12,000 jobs were lost in manufacturing. The private sector gained 139,000 jobs in December as […]