Evraz North America has taken an approximately one-week unplanned outage at its plate mill in Portland, Ore., market participants said. The downtime was needed because of problems with a reheat furnace, they said. The steelmaker has also scheduled a weeklong planned outage at the Portland plate mill in March, sources said. A company spokeswoman confirmed that […]
Total mill shipments of steel products fell 3.3% in November to 8.334 million tons, slipping for only the second time in eight months. Apparent supply rose fractionally in November, up 0.2% after eroding successively the prior two months. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export […]
The bubble is bursting. Not just any bubble. We’re talking the bubble that is ridiculously wide spreads between hot-rolled coil prices and base prices for cold rolled and coated products. Case in point: SMU’s hot-rolled coil price stands at $1,480 per ton, and our cold-rolled and galvanized base prices are at $1,880 per ton – […]
South Korean mills are out with new lower prices for steel sheet and steady prices for plate, according to recent offers reviewed by Steel Market Update. The trend is important because U.S. mills are increasingly willing to compete with imports, meaning that the latest import offers give an indication of where domestic prices are headed. […]
By Principal Analyst Josh Spoores from CRU’s Steel Sheet Products Monitor, Jan. 22 Trends in the North American sheet market have picked up where 2021 left off, particularly a continued decline in sheet prices. Various supply pressures have overwhelmed demand and led to lower sheet prices in all North American markets. In the U.S. Midwest […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Producer prices expanded by 0.2% in December, seasonally adjusted, maintaining their upward climb since reaching the most recent bottom 21 months ago, reports the U.S. Labor Department. The unyielding trend continues to highlight […]
Producer prices grew by 1.0% in January, seasonally adjusted, maintaining a 22-month growth run since reaching the most recent bottom in April 2020, reports the U.S. Labor Department. Wholesale prices jumped by twice the expected level in January as inflation pressures were unabated to start the year. The Labor Department said that its Producer Price […]
Nucor Corp. has confirmed that its greenfield, $2.7 billion electric arc furnace (EAF) sheet mill will be built in West Virginia. The Charlotte, N.C.-based steelmaker said the mill, expected to have capacity of three million tons per year, would be located in Mason County along the Ohio River. Additional sites in northern West Virginia are […]
Flat-rolled steel prices continue to fall, but the market participants I spoke to today were taking the news in stride. SMU’s average hot-rolled coil price now stands at $1,480 per ton ($74 per cwt), down $55 per ton from $1,535 per ton a week ago and down $475 per ton from a 2021 high – […]
Where will hot-rolled coil prices be at the end of the first quarter? That’s what we asked respondents to SMU’s latest survey. And the short answer is that they’ll be lower – but there is little consensus on just how much lower. We asked this: “Hot-rolled coil prices averaged $1,600 per ton at the end […]
Steel prices declined for the fourth consecutive month in December, following a year-long streak of continuous price increases. Hot-rolled coil prices declined $130 per ton throughout the month, with the SMU index averaging $1,600 per ton ($80.00 per cwt) as of Tuesday, Dec. 21 (SMU did not published updated prices on Dec. 28). The SMU Price Momentum […]
There’s surprisingly little consensus among market participants about where steel prices will be next year, even though 2022 is just around the corner. That’s a big departure from the last 12 months, when respondents to Steel Market Update surveys were roughly in agreement on where prices would be in the future – or at the very least […]
Steel Buyers Sentiment, as measured by Steel Market Update, has not reacted much to declining steel prices. Perhaps because prices remain well above historical averages even after big declines – more than 18% when it comes to hot-rolled coil – over the past three months. Indeed, 2021 was a record year for many companies, leaving […]
First the takeaway: Don’t overthink it on the way down. Prices are falling, like it or not. The good thing, demand is still good – so don’t let falling prices ruin your holidays. Now, let’s overthink it a little. We’ve seen some chunky declines in recent weeks: SMU’s hot-rolled coil price fell $70 per ton […]
It’s not just domestic steel prices that are falling rapidly, so too are prices abroad. Case in point: South Korean steelmaker Hyundai. Its latest offer for hot-rolled coil for February-March shipment to the West Coast is $1,450 per ton DDP to Los Angeles-area ports. That’s down significantly from prior offers of $1,600-1,640 per ton, according […]
California Steel Industries (CSI) has opened its February order book for flat-rolled steel and decreased prices significantly, according to market participants. That’s a big change from 2021, when the Fontana, Calif.-based slab converter often increased prices substantially from one month to the next. “Customers are reminded that prices are subject to change at any time […]
U.S. Steel expects lower adjusted EBITDA in the fourth quarter compared to the third but a strong 2022 thanks to contract prices resetting higher. The Pittsburgh-based steelmaker forecast fourth-quarter adjusted EBITDA of $1.65 billion, down from adjusted EBITDA of $2.03 billion recorded in the prior quarter. The fourth-quarter dip represents a temporary slowdown in order […]
Producer prices expanded 1.4% in November, seasonally unadjusted, climbing consecutively since reaching the most recent bottom 20 months ago, reports the U.S. Labor Department. Persistently high prices in large part continue to reflect clogged supply chains, as manufacturers scramble to keep up with unusually strong consumer demand. The Labor Department said that its Producer Price Index […]
Steel prices fell hard again this week. While the absolute numbers – down $60 per ton ($3 per cwt) on hot-rolled coil – might appear shocking at first glance, one could make the case that we’re being conservative. The development shouldn’t have come as a surprise to those who lived through past ups and downs. […]
Steel sheet prices fell again this week as mills continued reducing prices on shorter lead times and increased competition from both imports and other domestic producers. Published lead times are as low as 3-4 weeks for hot-rolled coil, for example, and sources reported orders being processed early. Some said mill offers declined substantially over the […]
California Steel Industries (CSI) has closed its January order book for flat-rolled steel – but doing so took significantly longer than in past months. “We will contact you when we open the flat rolled order book for February 2022,” the Fontana, Calif.-based slab converted said in a letter to customers on Monday, Dec. 13. The company […]
On Friday, the Labor Department announced the inflation rate for November. At 0.8%, it was a tick lower than the October inflation rate of 0.9%. But most observers paid more attention to the annual rate of inflation. At 6.8% compared to prices one year ago, the inflation rate was the highest it’s been since 1982. […]
Total mill shipments of steel products edged up 1.4% in October to 8.619 million tons, following a 12.2% fall the month prior. Apparent supply slipped for the second straight month in October, down 2.2% on top of a 6.9% decline in September. October’s contraction marks the first month-on-month decrease in steel supply since apparent supply fell […]
Top U.S. and British trade negotiators appear to be nearing a deal to ease Section 232 tariffs on steel and aluminum from the United Kingdom. That’s according to recent statements from the Office of the U.S. Trade Representative (USTR) and the Commerce Department. Case in point: Commerce Secretary Gina Raimondo and UK Secretary of State […]
Sheet and plate prices fell across the board this week on shorter lead times, import competition and increased spot availability from domestic mills. Declines for hot-rolled coil were generally steeper than those for value-added products. And while certain mills are trying to hold the line around $1,800 per ton, EAF producers were reported to be […]
Looking for floor plate for Christmas? What about hot-rolled coil for the New Year? You’re in luck. Cleveland-Cliffs Inc.’s steel mill in Riverdale, Ill., can get floor plate to you by Dec. 25, or just 18 days from now. And most of its sheet mills can get you hot-rolled coil by Jan. 1, or 25 days […]
I’m concerned we’ve all gotten a little too complacent with the idea that the price correction underway will continue to be gradual and that the new floor for hot rolled coil, whatever it is, will be four digits instead of the sub-$400-500 per ton floors that have characterized past downcycles. I’m not saying we’re headed […]
New orders, production, employment, and imports grew in November. But prices fell, and delivery delays increased on tightening backlogs. That’s the takeaway from the Institute for Supply Management’s latest Manufacturing Report on Business. ISM’s Manufacturing Purchasing Managers Index (PMI) rose to 61.1% in November, up 0.3 percentage points from October and indicating continued expansion in the overall economy for the […]
Steel prices declined for the third consecutive month in November, following a 12-month streak of continuous price increases. Hot-rolled coil prices declined $105 per ton throughout the month, with the SMU index averaging $1,770 per ton ($88.50 per cwt) as of Tuesday, Nov. 30. The SMU Price Momentum Indicator for hot-rolled coil was adjusted from Neutral […]
Published mills lead times are back, another sign that the steel market is returning to something resembling normal. Hot-rolled coil lead times, for example, are three to four weeks at some mills. That would be unremarkable in a normal market. But it is news after a year in which customers were either on allocation or […]