Stainless steel sheet and strip imports from China will continue to be subject to antidumping and countervailing duties for at least another five years. This comes as a result of the US International Trade Commission’s final vote in a sunset review of the duties. The agency voted that revoking the current duties would likely lead to […]
The US Department of Commerce’s International Trade Administration is giving interested parties the opportunity to request administrative reviews of antidumping and countervailing duties on certain imports. The reviews look at imports during certain periods of reviews to determine if the duties should be adjusted. Interested parties currently have the opportunity request reviews of duties on […]
Steel prices were steady to slightly down throughout the month of September, following declines seen in each of the four months prior. Hot-rolled prices averaged $780 per ton ($39.00 per cwt) the first week of September, falling to a low of $770 per ton in the third week of the month, and rising to $775 […]
Our most recent lead time data is flashing a clear warning signal when it comes to plate prices, and so too are plate prices abroad – which in theory offer massive discounts to domestic numbers. Let’s start with plate lead times, which we released today along with lead time figures for sheet products. Plate lead […]
The appeal to import foreign hot-rolled coil (HRC) in place of purchasing domestic steel remains low to non-existent, but that may be changing, according to our latest foreign versus domestic price analysis. Foreign prices were flat to down as much as $40 per net ton this week, while domestic prices increased $5 per ton. Foreign […]
The US Department of Commerce has issued its final determinations in the trade case investigating the dumping of OCTG imports from Mexico, Argentina, and Russia, and the subsidization of OCTG from Russia and South Korea. The investigations include both welded and seamless OCTG. Antidumping Case In the final results of the case investigating Mexico, Commerce […]
Preliminary US Census Bureau data indicates that steel imports will have totaled 2.51 million net tons during the month of August. This is down 6% from the prior month and potentially the lowest monthly rate seen since February of this year. Recall that monthly import levels also declined 6% from June to July. August figures […]
Foreign steel imports from two of the three regions tracked by Steel Market Update no longer have a price advantage over domestic steel. US HRC prices are potentially 5% cheaper than imported steel from the two regions, according to our latest foreign versus domestic hot-rolled steel price analysis. Foreign HRC prices for just one region […]
US Steel Corp.’s month-long maintenance outage on the No. 3 blast furnace at Mon Valley Works near Pittsburgh is expected to be completed on Saturday, Sept. 24, a company spokeswoman confirmed to SMU. Once complete, the blast furnace is expected to remain idle for the next month or so in response to declining demand and […]
Total mill shipments of steel products were largely sideways in July, up marginally when compared to June. Mill shipments have been fluctuating up and down all year with little consistency. July’s mill shipments totaled 8.11 million tons, a 0.3% increase from June’s 8.09 million tons. Apparent supply also saw a slight gain in July, up just 1.1% […]
Imported sheet and plate products arrived at US ports at a slower clip in July, resulting in them accounting for a lower share of the domestic market, according to US Commerce Department data. Imports’ share of US sheet and plate markets peaked in December, with sheet reaching its highest level in the past 4.5 years. The trend […]
US plate prices fell this week, responding to Nucor’s latest price announcement on Monday, Sept. 19. Price tags remain under pressure and further declines are expected through the fourth quarter as spot demand is likely to remain limited. But few expect Nucor’s latest plate price announcement to generate any immediate business, sources told SMU, speculating […]
To bring its results in line with a recent US Court of International Trade (CIT) decision, the US Department of Commerce is amending antidumping duties on imports of hot-rolled steel flat products from Australia. The move comes after Australia’s BlueScope Steel Ltd. was successful in challenging at the CIT Commerce’s final results of the first administrative review […]
The US Department of Commerce has released updated antidumping duty rates on certain pipe and tube imports after administrative reviews. It has also brought prior determinations in line with remand orders from the US Court of International Trade (CIT). OCTG Commerce set a 1.59% weighted-average dumping margin for the Interpipe group of companies in the preliminary results of […]
Antidumping and countervailing duty actions (also known as trade cases) have been a mainstay for protecting American industries from foreign competition. Many lawyers and economic consultants (I am among them) have made their living litigating these cases at Commerce Department, the US International Trade Commission, and the courts. More than 660 products are currently subject […]
United States Steel Corporation has idled the No. 8 blast furnace at its Gary Works in Indiana due to market conditions and high import levels. A spokeswoman confirmed the idling began on Sept. 7. “We continue to monitor market conditions and plan to bring the furnace back online when business conditions allow,” she told SMU. […]
Foreign steel imports from two of the three regions tracked by Steel Market Update have lost their price advantage over domestic steel, according to our latest foreign versus domestic hot-rolled steel price analysis. After taking freight costs, trader margins and tariffs into consideration, foreign HRC prices for just one region remain cheaper than domestic steel […]
US apparent steel supply recovered 2% in July to 9.23 million net tons, according to the latest US Department of Commerce and American Iron and Steel Institute data. July supply levels are 2% below the average monthly rate across the past year of 9.41 million tons. Recall that supply reached a six-year high last September at 9.92 million […]
US plate prices were unchanged this past week but remain under pressure. Spot demand is limited, with sources noting that Nucor’s efforts to keep prices flat might be short-lived. Recall that Nucor announced it would keep some plate prices flat and decrease certain cut-to-length items as much as $150 per ton ($7.50 per cwt) with the […]
The White House announced earlier this month, to no one’s surprise, that hundreds of companies and trade associations had expressed interest in continuing Section 301 tariffs on Chinese goods. These expressions related only to the tariffs on $34 billion and $16 billion in trade value, the so-called “List 1” and “List 2” tariffs. The Office […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. Rock provides customers attached to the steel industry with commodity price risk management services and market intelligence. RTA is registered with the National Futures Association as a Commodity Trade Advisor. David has over 20 years of professional trading experience and has been active […]
Final Census data shows that 2.68 million net tons of steel imports entered the country in July, down 6% compared to the month prior and the lowest rate in the past five months. The preliminary import figures reported last week were just 4,000 tons shy of the final count (most of the flat rolled products […]
Foreign hot-rolled coil imports have very little (if any) price advantage over domestic steel prices at this time, according to SMU’s latest analysis. In fact, German HRC prices are more expensive than domestic steel after taking freight costs, trader margins and tariffs into consideration. Prices in Italy and in Asia hold only a 1–3% potential […]
SMU polled steel buyers earlier this week on a variety of subjects including current and future steel prices, inventory strategies, demand, and new capacity. Rather than summarizing the comments we received, we are sharing them in each buyer’s own words. We want to hear your thoughts, too! Contact Brett@SteelMarketUpdate.com to be included in our questionnaires. Where […]
ArcelorMittal has announced the idling of furnaces across Europe, including blast furnace A at its steel works in in Asturias, Spain, multiple facilities in Germany, and the blast furnace at its mill 2 in Dunkirk, France. According to the Luxembourg-based company, blast furnace A in Asturias will be shut down by the end of September. Blast […]
The global steel decarbonization challenge is immense but uneven, argued Philip Bell, Steel Manufacturers Association’s (SMA) president, during a 2022 SMU Steel Summit Conference panel addressing the challenges and opportunities a new carbon frontier poses on the domestic steel industry. “One of the most important things to emphasize from a US steelmaker perspective is that […]
US Steel has temporarily idled the No. 5 tin line at its Gary Works in northwest Indiana. The Pittsburgh-based steelmaker indicated that the move was necessary because of weaker demand and increased import volumes. “The company’s other tin operations continue to operate in line with customer demand. We expect to bring number 5 tin line back […]
The temptation to purchase foreign hot-rolled coil (HRC) at a discount over domestic steel remains minimal. Adjusted foreign prices now offer little advantage over domestic steel, according to Steel Market Update’s (SMU) latest analysis. After taking freight costs, trader margins, and tariffs into consideration, foreign HRC prices for the three regions covered in this analysis […]
The US economy shrank at a revised -0.6% in the second quarter of 2022, declining for the second straight quarter. Gross domestic production in Q2 contracted at a more moderate pace than initially though, according to the second estimate from the US Commerce Department’s Bureau of Economic Analysis (BEA). The result was a slight improvement […]
Preliminary Census data indicates that July steel imports will total 2.67 million net tons, down 6% compared to June and the lowest monthly rate since February of this year. July figures are down 14% compared to March’s 26-month high of 3.09 million tons. Import licenses for August are currently at 1.98 million tons through August […]