Net job creation in December was a disappointing 74,000, far below expectations. However November was revised up by 38,000 and the three month moving average of monthly job gains was hardly dented (Figure 1). This monthly result is at odds with most other economic indicators and was probably adversely affected by short term influences such […]
Essentially all of the domestic steel mills have finished maintenance on their blast furnaces. U.S. Steel is bringing back online their Fairfield furnace, Berkeley has completed the expansion of its hot strip mill and other domestic steel mill maintenance projects from 4th Quarter 2013 have been completed. Supply is available and now it is time […]
The following article is a continuation of our Steel Buyers Basics series. Today’s article was written by Mario Briccetti. There is a hidden risk in the cost of sheet steel that many buyers do not consider. Most cold rolled and coated steel sheet applications require coverage of an area at a minimum steel thickness – […]
Buyers and sellers of flat rolled steel entered the New Year in very high spirits. Our Steel Market Update (SMU) Steel Buyers Sentiment Index was measured at +42 which is the most optimistic level recorded since March 1, 2012 (+45). The rolling three month moving average (3MMA) came in at +38.33 which is a one […]
Cargill will build its eighth U.S. steel processing center in response to increased demand for carbon steel sheet & coil products used in the manufacturing and shale oil and gas industry in Northern Colorado. The hot-rolled steel processing facility, located 60 miles north of Denver in Windsor, will begin construction in early 2014 and provide […]
Schnitzer Steel Industries, a metals recycling business, reported an adjusted net loss of $5 million during the first quarter 2014, ending Nov. 30, 2013, compared to adjusted net losses of $14 million the previous quarter and $1 million a year ago. Losses reflected soft ferrous scrap prices early in the quarter and restructuring costs. “All […]
Steel buyers are expecting general economic activity to remain unchanged to slightly better in the next six months. In the December ISM Steel Buyers Survey 63.6 percent expect conditions to remain the same while 36.4 percent of those surveyed expect improvement. This compares to 66.7 percent and 26.7 percent, respectively, last month. Sales and production […]
ASD Press Release: CHICAGO — The Association of Steel Distributors (ASD) announces that James (Jim) Barnett, president of Grand Steel Products in Wixom, Mich., is the recipient of the industry’s highest honor, the Steel Man of the Year Award. This annual ASD award honors one individual who embodies leadership, dedication, service and excellence in the […]
The JP Morgan Global Manufacturing PMI rose to 53.3 in December from 53.1 in November, expanding for the twelfth consecutive month. Manufacturing production increased at its fastest pace since Feb. 2011, with growth rate of new orders holding steady at November’s rate. Exports rose for the sixth consecutive month. The US, Japan, Germany, the UK […]
In the steel business and particularly in the painted steel business, a fair amount of non-prime or secondary flat rolled sheet and coil product is produced. Non-prime painted steel is generated either because the steel substrate is substandard or because there is a problem in the painting process. A small sample of steel problems are: […]
The Empire State Manufacturing Index showed disappointing manufacturing conditions for December. The survey by the Federal Reserve Bank of New York reported the general index at 1.0, up three points from November but indicating almost no change in activity for the month. The future outlook index was slightly less optimistic than November with all indices […]
Manufacturing activity expanded in December for the seventh consecutive month and rose to its second highest reading of 2013. The PMI (purchasing managers index) registered 57 percent according to the December 2013 ISM Manufacturing Report on Business. New orders, employment, supplier deliveries and prices all grew at a faster rate in December. New Orders increased […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered at present is thirty six. The present situation of eleven of the indicators based on historical standards was positive on December 28, the same as on November […]
The Empire State Manufacturing Index showed disappointing manufacturing conditions for December. The survey by the Federal Reserve Bank of New York reported the general index at 1.0, up three points from November but indicating almost no change in activity for the month. The future outlook index was slightly less optimistic than November with all indices […]
Just like in steel, paint companies and coil coaters work best with customers with whom they have a relationship, companies who clearly understand their needs and are consistent in their tonnages as well as the way they conduct their business. In order to establish this kind of a relationship a buyer should understand the […]
On Monday, December 16th we began collecting data for our last Steel Market Update flat rolled steel market analysis. The way the system works is over the years Steel Market Update (SMU) has vetted a number of companies (many of whom John Packard did business with in the past). Our current list has approximately 600 […]
Manufacturing companies are beginning to report a fracture within the service center ranks. In our latest steel market analysis conducted last week, 12 percent of the manufacturers reported decreasing spot flat rolled prices from their service center suppliers. This is up from 4 percent measured at the beginning of December which was up from zero […]
Last week Steel Market Update invited approximately 600 companies to participate in our mid-December 2013 flat rolled steel market survey. Of the companies responding this past week, 49 percent were manufacturing companies, 39 percent were service centers/wholesalers, 4 percent trading companies, 3 percent steel mills, 3 percent toll processors and 2 percent suppliers to the […]
Of the three main ways of procuring prepainted flat rolled steel described in my last article, buying from a service center is the simplest. Service Centers will quote a price that can be compared apples to apples against one other. In addition a good Service Center can consult on the correct specifications and will also […]
Manufacturing activity slowed in the Second and Third Districts in December and fell in the Tenth. The Federal Reserve Bank of New York reported the general manufacturing index for the region at 1.0, up three points from November but indicating flat conditions for the month. Likewise, the Federal Reserve Bank of Philadelphia (Third District) reported […]
The Steel Market Update (SMU) Steel Buyers Sentiment Index was reported this week to be +37 which is 2 points lower than our last reading made during the first week of December. Nonetheless, SMU Steel Buyers Sentiment is well within the optimistic range of our index where it has been for 24 consecutive months. Sentiment […]
Financial Markets: Well two weeks back the S+P held that 1775 zone it tested. It has since rallied back to new highs yesterday at 1806.75, this for the March future. Yesterday the Fed announced the beginning of the easing of the easing, or bond buyback program. The Fed will start to taper their bond buying […]
Steel Dynamics issued its fourth quarter 2013 guidance on Tuesday reporting earnings in the range of $0.21 to $0.25 per diluted share, below analyst estimates ranging from $0.26 to $0.31. SDI announced a quarterly cash dividend of $0.11 per share. Earnings are expected to be comparable to those of third quarter. Higher steel pricing is […]
Detroit automaker GM and Ford are going into an expansion mode that will add nearly 6000 new US auto industry jobs in 2014. GM plans to invest $1.3 billion at five US plants in 2014 that will create or retain about 1000 jobs said retiring GM CEO Dan Akerson in his remarks on Monday to […]
U.S. industrial production jumped 1.1 percent in November after inching up a revised 0.1 percent in October, according to information released by the Federal Reserve Board on Dec. 16. Manufacturing output increased 0.6 percent for its fourth consecutive monthly gain. Utilities saw a surge of 3.9 percent as winter weather boosted demand for heating. Automobile […]
The December Empire State Manufacturing Survey indicated disappointing manufacturing conditions for December. The survey by the Federal Reserve Bank of New York reported the general index at 1.0, up three points from November but indicating almost no change in activity for the month. The new orders index rose slightly but stayed in negative territory at […]
In recent years coil coated painted steel (where a full coil of steel is painted on a continuous coil coating line) has been replacing post-painted steel (where steel parts formed bare are then painted one-by-one). It seems unlikely at first glance that painted coil coated steel can been formed into finished parts (like roof panels […]
The next three months are looking good to metalforming companies in the Dec. 2013 Precision Metalforming Association Business Conditions Report. The number of participants that forecast an improvement in economic activity during the next three months jumped to 41 percent, up from 27 percent in November. Likewise, incoming orders are expected to spike with 43 […]
My final thoughts will be brief this evening. I would like to remind both service centers and manufacturing companies if your company has news – expansion plans, new executives, bringing a plant back to North America from overseas, etc. we would like to know. Please send any press releases or correspondence to: info@SteelMarketUpdate.com My feet […]
The other day Steel Market Update wrote an article about steel buyers anticipating a flat rolled steel price increase announcement out of the domestic mills prior to the end of the year. Not everyone is a believer that will occur and we got several emails and phone calls pointing out short lead times at a […]