Flat-rolled steel inventories continue to rise at service centers, and steel buyers are not flocking to do their normal end-of-year deals with steel mills. Steel Market Update has not yet produced our final Service Center Inventories and Shipment report. But we have published our “Flash” report, which we provide to our data providers after collecting five […]
Imports of less-expensive sheet and plate products have been on the rise for the past five months as buyers continue to seek relief from record-high steel prices in the U.S. September Commerce Department data show imports’ share of the U.S. flat-products markets at their highest levels in the past 4-5 years. Imports’ share of total […]
Total mill shipments of steel products fell 12.2% in September to 8.502 million tons, after seeing an 11.1% increase the month prior. Apparent supply also slipped in September, down 6.9%, following a 7.9% increase in August. September’s contractions mark the first decrease in steel supply in seven months. This analysis is based on steel mill shipment […]
September apparent steel supply increased by 90,000 tons over August to 9.92 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest supply level seen in more than six years, going back to January 2015 when supply surpassed 10 million tons. September supply is up […]
By Stephen Williamson, CRU Research Manager, Aluminum Aluminum prices went through the $3,000 per metric ton mark on the LME this week. Fueled by energy constraints in China and tightening supply of alloy hardeners, the price broke through the $2,950 ceiling and ran up another $200. The price leveled at $3,150 as of this writing […]
August apparent steel supply increased by 130,000 tons over July to 9.83 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest supply level seen since January 2019, a 31-month record. August supply is up 2.69 million tons compared to the same month […]
Mill shipments of steel products jumped 11.2% in August to 9.69 million tons, following an increase of 2.0% the month prior. Apparent supply was up 7.8% in August after a 3.6% increase in July. August’s expansion is the sixth straight month of growth in the steel supply since February’s double-digit contraction. This analysis is based on […]
In the face of strong demand, limited availability and record-high prices in the U.S., steel buyers have looked overseas for relief. August Commerce Department data shows steel imports have been on the rise for the past three months, with imports’ share of total sheet product shipments reaching 17.5%, up from 16.7% the month prior, and the […]
U.S. domestic steel demand remains strong, but supplies have been catching up and are largely in balance. These dynamics are starting to show as steel prices have seen a slower rate of rise and may be near a peak. Lead times are also contracting, with hot rolled now below nine weeks. These changes are largely a […]
Mill shipments of steel products rose 2.0% in July to 8.7 million tons, following an increase of 1.7% the month prior. Apparent supply jumped 3.6% in July after a 6.0% increase the prior month. July marks the fifth consecutive month of gains after February’s double-digit contraction. This analysis is based on steel mill shipment data from […]
July apparent steel supply increased 312,000 tons over June to 9.70 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is now the highest supply level seen since January 2019, a 30-month record. July supply is up 2.73 million tons compared to the same month […]
Mill shipments of steel products rose in June by 1.7%, following an increase of 1.9% the month prior. Apparent supply jumped 6.0% in June after a 1.3% increase in May. June’s gains were the fourth in as many months after February’s double-digit contraction. This analysis is based on steel mill shipment data from the American […]
Steel demand remains strong, outpacing supplies in the U.S. and causing prices to continue escalating. The trend is attracting more imports as customers look overseas for price and supply relief. June data shows imports of most steel products have risen over the past two months as imports’ share of total sheet product shipments rose to 16.2%, […]
June apparent steel supply rose 270,000 tons over May to 9.38 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest suppy level seen since January 2020, surpassing the May 2021 recent-high of 9.11 million tons. June supply is up by 2.47 million […]
May apparent steel supply rose 340,000 tons over April to 9.11 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is now the highest suppy level seen since January 2020, surpassing the March 2021 recent high of 8.96 million tons. May supply is up by 2.51 million […]
Mill shipments of steel products rose in May by 1.9%, rebounding from the 2.0% decline seen the month prior, while apparent supply was up 1.7% compared to April. Although mill shipments and apparent supply gains have decelerated from the nearly 20.0% rally seen in March, May’s gains were the third increase in as many months […]
Steel Market Update is pleased to share this Premium content with our Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Steel demand continues to outpace supplies in the U.S., leading to one price increase after another. Buyers are struggling to source enough steel to meet their customers’ needs and […]
This report examines the import share of tubular and long products shipments. Imports’ share of total tubular products rose to 47.9% in May, up from 46.6% in April. Total tubular imports rose by 6.4% month on month, while domestic shipments ticked up only slightly by 0.4% during the same period. Overall supply was up as […]
Steel prices rose another $35-50 per ton this week with hot rolled and coated products surpassing notable new benchmarks of $1,800/$2,000. Steel Market Update’s canvass of the market this week puts the average HRC price at $1,820 per ton ($91/cwt) and galvanized at $2,030 ($101.5/cwt). Buyers continued to voice concerns about late mill shipments and […]
Mill shipments of steel products declined by 2.0% in April compared with the month prior, while apparent supply increased by 2.8% during the same period. April’s totals were a letdown from the strong performance in March, which saw shipments of steel products leap by 18.3% and apparent supply accelerate by 18.1%. This analysis is based […]
April apparent steel supply declined 189,000 tons from March’s high to 8.77 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the second highest suppy level seen since January 2020, just behind the March 2021 high. April supply is up 2.24 million tons compared […]
This report examines the import share of tubular and long products shipments. Imports’ share of total tubular products rose to 46.6% in April, up from 46.2% in March. Both domestic shipments (-7.0%) and imports of tubular products (-5.8%) fell month on month, yet domestic shipments edged down at a stronger clip when compared to March. […]
This report examines the import share of sheet and plate products. Imports’ share of total sheet product shipments was 12.5% in April, down from 12.7% in March. By comparison, the import share of total plate product shipments jumped to 19.9% in April, up from 15.7% the month prior. Import share for sheet products has dipped […]
March apparent steel supply rose nearly 1.5 million tons from February’s dip, now at 8.96 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest supply level seen since January 2020’s 9.52 million tons. March also marks the largest month-over-month increase in supply […]
Flat Rolled = 41.8 Shipping Days of Supply Plate = 42.8 Shipping Days of Supply Flat Rolled U.S. service center flat rolled inventories remain low, though steel mills are starting to catch up on delayed orders. Service centers carried 41.8 shipping days of supply at the end of April, flat compared to March’s adjusted inventory […]
Mill shipments of steel products improved by 18.3% in March compared to the month prior, while apparent supply increased by 18.1% during the same period. The double-digit gains are even more impressive considering their low performance in February, the first decline in both apparent supply and shipments of steel since the market reached bottom back in […]
This report examines the import share of sheet and plate products. Imports’ share of total sheet product shipments was 12.7% in March, down from 14.0% in February. The decrease corresponds to a simultaneous increase in domestic shipments and a rise in imports; however, the surge in domestic shipments at 17.4% month on month outpaced the […]
This report examines the import share of tubular and long products shipments. Imports’ share of total tubular products rose to 46.2% in March, up from 44.6% in February. Despite a 30.7% surge in domestic tubular shipments month on month, imports were even stronger at 39.3% in March compared to February. Tubular imports fell consecutively in […]
February apparent steel supply slipped 500,000 tons or 6.3% from the 10-month high seen in January, now at 7.51 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. Although down from the month prior, February supply is at the third highest level seen in the last […]
Mill shipments of steel products fell 9.8% month on month in February, while apparent supply was down by 12.5% during the same period. This is the first noticeable decrease in both apparent supply and shipments of steel since the market reached bottom back in May 2020. Mill shipments were down by 13.1% year on year, […]