NLMK USA was not among the mills to learn earlier today that the Commerce Department had denied their requests for relief from the Section 232 tariffs on imported slabs. California Steel Industries and Evraz got the bad news. But NLMK USA President and CEO Robert Miller is still angry about it. “The administration, Commerce, BIS […]
The Bureau of Industry and Security today denied the exclusion exemptions for two mills: California Steel Industries and Evraz. At this point, we are expecting the NLMK USA and JSW USA exclusion requests to be denied as well. However, a trade attorney (not Lewis) suggested that we not move too fast with any proclamations. There […]
On Wednesday morning, Nucor announced a $40 per ton ($2.00/cwt) “minimum” price increase on flat rolled steel products. The mill advised their customers the increase was to be “effective immediately.” This is the second price increase announcement out of Nucor in less than 30 days. On Jan. 28, 2019, Nucor announced a $40 per ton […]
As the domestic steel mills started raising flat rolled prices on Wednesday, Steel Market Update reached out to a number of steel buyers in order to get their reaction to the news. We discussed the $40 per ton increases announced by Nucor, NLMK USA, U.S. Steel, California Steel and USS/POSCO along with ArcelorMittal USA’s new […]
The U.S. Department of Commerce released new license data through the 19th of February and the trend for imports is at 2.6 million net tons (+/- 200,000 tons). Semi-finished steels continue to be the largest single product imported, with most being slabs heading to mills like California Steel, NLMK USA, JSW USA and ArcelorMittal Mobile. […]
NLMK Pennsylvania says it is the “poster child for tariffs,” paying more than $160 million in duties for the steel slabs it utilizes at its operations. “I can’t imagine anybody paying more money in tariffs than we have,’’ said Bob Miller, NLMK Pennsylvania president in a recent comment to the Sharon Herald. NLMK Pennsylvania relies […]
Sales at NLMK USA fell 15 percent from third- to fourth-quarter 2018 on expectation of lower steel prices. Shipments dropped 500,000 metric tons from 590,000 tons, sequentially. The decrease in shipments, combined with a 3 percent decline in average price, led to sales falling 17 percent to $500 million. On a yearly basis, NLMK USA […]
We have seen Nucor, U.S. Steel, NLMK USA and ArcelorMittal move spot flat rolled base prices up $40 per ton effective immediately. That is what was announced this week. The reality is not yet clear, and the prices referenced in tonight’s pricing assessment only marginally take the increases into account as negotiations are very early […]
Major domestic steelmakers have announced a $40 per ton ($2/cwt) hike in the price of hot rolled, cold rolled and galvanized steel products, fueling the debate over whether current market conditions can support an increase or if the latest announcement is bound to flop like the last one in October. West Coast mills California Steel […]
What an interesting week it has been, and it’s only Tuesday. As previous articles have already stated, Nucor, U.S. Steel, NLMK USA and ArcelorMittal (verbally) have joined California Steel and USS/POSCO by announcing $40 per ton price increases on flat rolled. For those of you who are new to the industry or to our newsletter, […]
NLMK USA sales improved 2.0 percent year-over-year in 2018 to 2.28 million metric tons. Results were driven by increased sales of hot-rolled steel and galvanized flats in the U.S. Sales slumped during the fourth quarter as customers put purchases on hold in expectation of lower steel prices. Sales slid 15 percent from the third quarter […]
Steel service centers are struggling to peg the spot end user markets and what price levels they need to be offering to their spot flat rolled customers, based on the results obtained from last week’s flat rolled and plate steel market trends analysis performed by Steel Market Update. Steel Market Update follows the service center […]
Steel service centers are struggling to peg the spot end user markets and what price levels they need to be offering to their spot flat rolled customers, based on the results obtained from last week’s flat rolled and plate steel market trends analysis performed by Steel Market Update. Steel Market Update follows the service center […]
My sources are telling me the electric arc furnace at JSW Ohio (former Mingo Junction) is almost ready to run. The company has been training and doing dry run testing, and I am being told they have enough crews to run 24 hours a day once the furnace comes back online. It appears the goal […]
The price increase on flat rolled seems to have “fizzled out,” according to many of the steel buyers Steel Market Update spoke with over the past two days. A number of mills have sweetened their end-of-the-year deals in order to finish out their 2018 order book. This is not unusual during a normal fourth quarter, […]
Finally, I am back in my office after what seems like one long continuous trip over the last six weeks. I expect to be in my office over the next few weeks until I head to Pittsburgh in mid-November to visit the CRU offices here in the United States. We have a couple of new […]
Registration is now open for the first Steel 101 workshop of the New Year (2019). The first Steel 101: Introduction to Steel Making & Market Fundamentals workshop in the New Year will be held in Starkville, Miss., on Jan. 29-30, 2019. This workshop will be special as we will be touring the SDI Columbus EAF […]
Pittsburgh, PA, October 18, 2018 – Allegheny Technologies Incorporated (NYSE: ATI) announced today it has signed an agreement to provide carbon steel hot-rolling conversion services for NLMK USA at ATI’s world-class Hot-Rolling and Processing Facility, or HRPF, located in Brackenridge, PA. Slab shipments to ATI will begin immediately and increase to anticipated production levels in […]
This afternoon, Steel Market Update spoke with James Banker, Jr., Executive Vice President of NLMK USA, about two topics. First, the slab conversion agreement between NLMK USA and Allegheny Technologies Inc. Second, we spoke about NLMK not following the $40 per ton price increase announced by the other domestic steel mills. We will discuss both […]
I had an interesting conversation with James (Jim) Banker, Jr., who is the Executive Vice President of NLMK USA late this afternoon. We discussed a couple of topics. One I described in an earlier article about their Allegheny Technologies Inc. slab tolling arrangement announced this morning. The second topic was about why NLMK USA has […]
NLMK USA sales slipped 8.0 percent in the third quarter to 590,000 metric tons as customers waited to see if steel prices would decline after reaching a high in July. Sales were up 4 percent from third-quarter 2017, driven by a stronger U.S. economy and steel demand. Sales in the first nine months of the […]
California Steel Industries, NLMK and Evraz have filed rebuttals to objections made by U.S. Steel, Nucor and AK Steel to their petitions requesting exclusions for steel slab imports necessary for production. The slab converters charge that domestic mills have misled Commerce in their objections, overstating the current availability of domestic slab and the capacity to […]
Steel Market Update will conduct one of our popular Steel 101: Introduction to Steel Making & Market Fundamentals workshops in Toledo, Ohio, on Dec. 11-12. We are working with North Star BlueScope, which will provide attendees with a tour of their electric arc furnace, caster and hot strip mill (all of the fun stuff). The […]
As I mentioned in a recent newsletter, comments received from our readers will many times lead to an article, or even a series of articles. One of our goals is to dig into topics of interest to our readers from as many angles as possible, and then allow you to make your own conclusions. For […]
If your company is interested in a sponsor spot at the 2019 SMU Steel Summit Conference in Atlanta (Aug. 26-28), please contact Jill Waldman at Jill@SteelMarketUpdate.com so we can get you our sponsorship package as soon as it is ready. Those companies that were sponsors this year will have first crack at committing for 2019. […]
Written by John Packard, President & CEO, Steel Market Update When I was selling steel for a domestic mill (Winner Steel, now called NLMK Sharon), there was always cause for concern when steel buyers would contact me and reference a price from a trade publication that I knew to be “out of date” with the […]
As a multinational business with a plant in the United States, should NLMK USA have a right to import slabs tariff-free from its parent company in Russia over the objections of domestic steel producers? The Trump administration maintains that steel imports, including Russian slabs, are a threat to the U.S. steel industry and thus national […]
Responding to a request for comment from Steel Market Update, both Nucor and U.S. Steel defended their objections to NLMK’s filing for exclusions that would allow them to import foreign-produced slabs without a tariff. NLMK USA President Bob Miller tells SMU that his company has already paid $90 million in tariffs on the Russian slabs […]
Steel Market Update has a NEW steel training workshop that is meant for both those new to the industry as well as those who have been in the industry for some time and would like a deeper pool of knowledge about the industry. The workshop is called Steel 201: Introduction to Advanced High Strength & […]
NLMK USA sales jumped 15 percent to 640,000 metric tons in second-quarter 2018. Revenue for the U.S. segment totaled $590 million, up 37 percent quarter-over-quarter and 35 percent year-over-year, due to rising demand and recent steel import restrictions. EBITDA for NLMK USA increased 90 percent quarter-over-quarter to $76 million supported by growing sales volume and […]