The steel price increases announced by the major mills have not had much effect on the HVAC sector yet, but members of the Heating, Air Conditioning & Refrigeration Distributors International (HARDI) are hopeful the market has bottomed and the value of their inventories has stabilized. “There hasn’t been much change in behavior on the street […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Welcome back from the Fourth of July Holiday (at least here in the United States). Steel Market Update gave our employees a couple of days off as we prepare for the next big push all the way to Atlanta and the SMU Steel Summit Conference on Aug. 26-28. A few minutes after I told those […]
The U.S. Department of Commerce announced duties of up to 456 percent in three preliminary circumvention rulings today involving exports of steel products from Vietnam. The circumvention rulings cover certain steel products that are first produced in Korea and Taiwan, then shipped to Vietnam for minor processing, and finally exported to the United States as […]
On Oct. 8-9, 2019, Steel Market Update will conduct our next Steel 101: Introduction to Steel Making & Market Fundamentals workshop in Cincinnati, Ohio. This workshop will include a tour of the Nucor Steel Gallatin Mill. Why do companies send employees to our Steel 101 workshops? Because they receive a broader understanding of: How steel […]
A note this morning from one of my scrap friends: “Btw, we are not getting too excited just yet, the scrap market is clearly beginning to bottom a bit. Should strengthen a little in August.” I am getting mixed messages on lead times, but I think the consensus is lead times have moved out […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
There seem to be more questions than answers regarding the move by the domestic flat rolled steel mills to increase spot base pricing on hot rolled, cold rolled, galvanized and Galvalume steels. The move was taken as the low end of the benchmark hot rolled steel base pricing was dipping below $500 per ton. The […]
By CRU Principal Analyst Josh Spoores Sheet prices in the U.S. have continued to fall with HR coil making a significant decline. For HR coil, CRU’s price assessment fell $34 /s.ton w/w to $505 /s.ton, the lowest price recorded since mid-November 2016. North America Our index is a volume-weighted average of actual transactions from last […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel From 7/11/2018 up to this Wednesday, 6/26/2019, the HR index that the CME uses to settle the HR futures contract has dropped […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
I am being asked for my opinion regarding the price increase announcements, and specifically if the increases will “stick”? The announcements are not a surprise to me as some of our data was showing service center spot pricing in the area of “capitulation” (more than 75 percent of the service centers dropping spot prices to […]
Hoping to put an end to declining flat rolled prices, a handful of steelmakers announced $40 per ton increases today, effective immediately on unconfirmed orders. The Nucor Sheet Mill Group was the first to announce that it is increasing base prices on new orders of hot rolled, cold rolled and galvanized steel by a minimum […]
As I expected, Nucor came out with a $40 per ton ($2.00/cwt) price increase on flat rolled this afternoon. This is the first Nucor price increase since Feb. 20, 2019. Shortly after the Nucor announcement, USS/POSCO followed with an increase letter of their own and then NLMK USA put out a letter identifying the minimum […]
Have steel prices finally hit bottom? Nucor is counting on it. The industry-leading steelmaker announced a $40 per ton price increase on it’s flat rolled products earlier today. Other mills are expected to follow suit. Effectively immediately, the Nucor Sheet Mill Group increased base prices on new orders of hot rolled, cold rolled and galvanized […]
Have steel prices finally hit bottom? Nucor is counting on it. The industry-leading steelmaker announced a $40 per ton price increase on it’s flat rolled products earlier today. Other mills are expected to follow suit. Effectively immediately, the Nucor Sheet Mill Group increased base prices on new orders of hot rolled, cold rolled and galvanized […]
Nucor’s Sheet Mill Group announced a second price increase on flat rolled steel today. Effective immediately on new orders, prices for Nucor’s hot rolled, cold rolled and galvanized steel products are increased by $40 per ton ($2/cwt). The notice to Nucor’s customers comes just two weeks after the steelmaker announced the first increase, also of […]
The day started slow, but it seems to have picked up steam after the Nucor announcement. As expected, most of the mills have followed the Nucor lead with NLMK putting specific base prices into the market. The guidance being given in the NLMK announcement is hot rolled at a $560 per ton ($28.00/cwt) minimum base […]
By Chris Houlden, CRU Research Manager CRU held its annual Steel Briefing in New York City on June 17. This Insight summarizes the key takeaways from papers presented by CRU North America market specialists Josh Spoores and Ryan McKinley. • Up to 20 Mt of new hot-rolling and over 8 Mt of steelmaking capacity could come […]
We are starting to receive nominations for the 1st SMU NexGen Leadership Award. We will accept nominations through Aug. 1. Remember, we are looking for those amongst you who have been innovative, creative problem solvers, perhaps creating new systems or leading through troubled times. There are an unlimited number of reasons to nominate one of […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
There were many questions raised earlier this week about the announced new steelmaking and rolling capacities and whether those projects would indeed continue through completion. The questions came during various steel meetings held by analysts, steel mills, CRU and others in New York City. I participated in three events and found the question brought up […]
Two of the biggest steel companies in the U.S. are expecting earnings to decline in the second quarter. Nucor and Steel Dynamics both cite lower shipments and inventory destocking as contributing factors. In guidance released on Monday, Nucor forecast earnings in the range of $1.20 to $1.25 per diluted share compared to $1.63 per share […]
I have been in New York City where one of the competitors of Steel Market Update was conducting a steel conference. There were a number of satellite mini-conferences surrounding the NYC event. I attended three of them: the CRU Steel Briefing, which attracted about 100-150 executives; the Bank of America Merrill Lynch dinner drawing a […]
Imported steel prices are no longer competitive with domestic steel mill pricing – even on light gauge galvanized and other specialty products that normally have gone to trading companies. Lead times are short, but as one steel executive put it to me this afternoon, “It’s not that the mills have no business. [For this time […]
Here we discuss the agenda, speakers and what we were thinking as we put together Day 2 of the SMU Steel Summit Conference, which is Tuesday, August 27, 2019. 7:00 AM to 8:00 AM – Doors Open at the Georgia International Convention Center Coffee, drinks and pastries will be available. Exhibition areas will be manned. […]
2019 SMU Steel Summit Conference – A Sneak Peek – Day 2 Written by: John Packard, President & CEO, Steel Market Update RE: 2019 SMU Steel Summit Conference, August 26-28, 2019 – Location: Georgia International Convention Center, Atlanta, GA On Thursday of this past week, I laid out the thought process involved with putting together […]
The Georgia International Convention Center (www.gicc.com) as well as the three Gateway Hotels (Marriott, Renaissance and SpringHill Suites) are all conveniently located at the first stop of the free SkyTrain out of the Atlanta International Airport (ATL). The second stop on the SkyTrain is for car rentals. Our overflow hotel – the Atlanta Airport Marriott […]