Steel price negotiations have tightened considerably as the mills have begun to hold firm in support of two $40 per ton price increases announced in the past two weeks. Note that Steel Market Update began gathering the data below on Monday, just prior to the latest mill price increase announcements on Tuesday and Wednesday. In […]
Lead times for steel delivery have moved out a bit in the past two weeks, lending support to recent mill price increases. The average lead time for hot rolled has moved up to nearly four weeks, cold rolled to nearly six weeks, and coated steels to more than six weeks. Plate lead times are bucking […]
I am carefully watching flat rolled and plate lead times, the ongoing negotiations and tone of the discussions between buyers and sellers of steel, as well as industry sentiment and how service centers are handling their spot pricing into their customers. We are seeing some signs of momentum shifting on some products (especially coated), but […]
Our pricing data was collected on Monday and Tuesday of this week prior to the new Nucor price increase announcement on flat rolled steel. We are seeing the market as stable to slightly higher. This week, especially in light of the second price announcement (combined totaling $80 per ton), we will be able to see […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Welcome back from the Fourth of July Holiday (at least here in the United States). Steel Market Update gave our employees a couple of days off as we prepare for the next big push all the way to Atlanta and the SMU Steel Summit Conference on Aug. 26-28. A few minutes after I told those […]
Last week, the domestic steel mills raised prices on hot rolled, cold rolled and coated products (galvanized, Galvalume, etc.) by approximately $40 per ton ($2.00/cwt). Since then, we have seen lead times move on hot rolled by about 1 to 1.5 weeks, according to the steel buyers canvassed yesterday and today. Cold rolled and coated […]
Steel Market Update asked steel buyers this week to respond to the following question: Do you believe a floor has been put on prices and they will rise from here? Here are some of the responses received: “A floor is possible, but I fear that if we see the expected downward move for scrap prices […]
On Oct. 8-9, 2019, Steel Market Update will conduct our next Steel 101: Introduction to Steel Making & Market Fundamentals workshop in Cincinnati, Ohio. This workshop will include a tour of the Nucor Steel Gallatin Mill. Why do companies send employees to our Steel 101 workshops? Because they receive a broader understanding of: How steel […]
This week I will be working with steel buyers (and steel mills) to see how the price increase on flat rolled is being received. As is normal when lead times are short and price announcements are made, many mills held pricing through the end of last week for those who had outstanding quotes or needed […]
We are passing through 750 executives registered for the 2019 SMU Steel Summit Conference, which will be held in Atlanta on Aug. 26-28. We continue to be on track to exceed the 912 executives we reached during last year’s conference. Our conference has become the premier steel conference in North America for many reasons: Networking: […]
There seem to be more questions than answers regarding the move by the domestic flat rolled steel mills to increase spot base pricing on hot rolled, cold rolled, galvanized and Galvalume steels. The move was taken as the low end of the benchmark hot rolled steel base pricing was dipping below $500 per ton. The […]
Flat rolled and plate steel prices tumbled again this week. The question now: Is this the last drop we will see as the domestic steel mills have stepped forward and announced price increases to the tune of $40 per ton? Base prices for benchmark hot rolled were beginning to pass through the psychological $500 per […]
The day started slow, but it seems to have picked up steam after the Nucor announcement. As expected, most of the mills have followed the Nucor lead with NLMK putting specific base prices into the market. The guidance being given in the NLMK announcement is hot rolled at a $560 per ton ($28.00/cwt) minimum base […]
One thing is certain in this crazy steel market, service centers are taking their spot prices lower and lower as each week passes. Manufacturing companies are almost unanimous in their view that flat rolled steel distributors are decreasing their spot offers. We saw 93 percent of the manufacturing companies responding to last week’s SMU flat […]
Steel price negotiations have been wide open for the past two months and there is no sign of that changing in Steel Market Update’s latest data. More than nine out of 10 steel buyers responding to SMU’s market trends questionnaire this week reported that the mills are still willing to negotiate on flat rolled and […]
The market is keeping a close eye on mill lead times, hoping for some sign they are extending and perhaps signaling a pickup in order activity at the mills. Steel Market Update’s latest numbers, which show little change in lead times, are sure to disappoint. Lead times for steel delivery are a measure of demand […]
By CRU Prices Analyst Estelle Tran Hundreds of steel executives from around the world gathered in New York City this week to hold meetings and learn about what will drive the steel markets in the second half of the year. The CRU Steel Briefing on Monday, June 17, provided attendees with our views on sheet […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
After a few weeks of dynamic price drops on all flat rolled and plate products, we saw prices moderate this week. Maybe a better way to put it is prices were flat to down slightly compared to one week ago when we saw major reductions in the spot numbers. Here is how we see prices […]
SMU now offers a comprehensive series of import reports ranging from the first look at Commerce Department license data to the very detailed look at volume by district of entry and source nation. The report you are reading now is designed to plug the gap between these two. Our intention is to report regional imports […]
SMU now offers a comprehensive series of import reports ranging from the first look at Commerce Department license data to the very detailed look at volume by district of entry and source nation. The report you are reading now is designed to plug the gap between these two. Our intention is to report regional imports […]
This report examines the import share of sheet, plate, long and tubular products and 16 subcategories. Table 1 shows total supply to the market in three months through April and in 12 months through April for the four product groups and the 16 subcategories. Supply to the market is the total of domestic mill shipments […]
2019 SMU NexGen Leadership Award – Frequently Asked Questions Question: What is the purpose of the award? Answer: To recognize the contributions being made by younger people in various roles in manufacturing, fabrication, steel distribution, steel mills, trading companies – essentially any company that handles mild carbon (coil, sheet or plate) or automotive steels. Steel […]
2019 SMU NexGen Leadership Award – Frequently Asked Questions Question: What is the purpose of the award? Answer: To recognize the contributions being made by younger people in various roles in manufacturing, fabrication, steel distribution, steel mills, trading companies – essentially any company that handles mild carbon (coil, sheet or plate) or automotive steels. Steel […]
U.S. steel exports in April totaled 602,652 net tons (546,717 metric tons), up 2.3 percent from March, but down 30.0 percent from levels one year ago. This is the fifth lowest monthly export level seen in Steel Market Update’s 10-year history, behind December 2018 at 519,099 tons, September 2018 at 584,858 tons, March 2019 at […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Demand for long products is strong, driven by construction, while demand for sheet is declining, according to this SMU analysis of the latest data from the American Iron and […]
Last week I spoke with Mark Millett, CEO of SDI, and he said to me, “Crazy market, isn’t it?” That is proving to be an understatement. Our price indices took major hits this week as we saw prices drop across the board. We heard the drop was blamed on scrap, on short lead times, on […]