Earlier this month Steel Market Update celebrated our 13th anniversary of officially being in business. I say “officially” because I was publishing the newsletter for a few years prior to starting SMU as a legal entity. It has been a while since I last related the history of Steel Market Update. Where did the idea […]
NLMK USA and striking United Steelworkers at the mill’s operations in western Pennsylvania remain at loggerheads nearly five and a half months after the labor action began. “As of now, we remain far apart with the union. We continue to meet in good faith working towards a resolution,” NLMK USA President and CEO Robert D. Miller said […]
Quality information is KEY…in steel and in life. I have been struggling on how to deal with what I saw Wednesday at the U.S. Capitol. We cannot allow thugs to attack the workings of our democracy. At the same time, we should hold those who spread disinformation to the public accountable for the disservice they […]
Quality information is KEY…in steel and in life. I have been struggling on how to deal with what I saw yesterday at the U.S. Capitol. We cannot allow thugs to attack the workings of our democracy. At the same time, we should hold those who spread disinformation to the public accountable for the disservice they […]
The Perfect Storm: Long lead times, late deliveries, low service center inventories, strong demand, higher prices, lack of foreign steel imports, mill outages both planned and unplanned, maximum capacity utilization rates at a number of mills, NLMK USA strike, higher ferrous scrap prices that are expected to go much higher in the coming months, restrictions […]
Steel Market Update has had conversations/communications with Robert Miller, CEO and James Banker, Jr., Executive Vice President of NLMK USA as we endeavor to learn more about the status of the strike against the Farrell, Pennsylvania facility, status of slabs for the Farrell mill, and gain a better understanding of the general flat rolled steel […]
On Wednesday, June 10, we will host our next SMU Community Chat webinar with our guest speaker James Banker, Jr., Executive Vice President of NLMK USA. As with every SMU Community Chat webinar, this is free to the public. Feel free to invite others from your company as well as your suppliers and customers. Click […]
On Wednesday, June 10, we will host our next SMU Community Chat webinar with our guest speaker James Banker, Jr., Executive Vice President of NLMK USA. As with every SMU Community Chat webinar, this is free to the public. Feel free to invite others from your company as well as your suppliers and customers. Click […]
On Wednesday, June 10, we will host our next SMU Community Chat webinar with our guest speaker James Banker, Jr., Executive Vice President of NLMK USA. As with every SMU Community Chat webinar, this is free to the public. Feel free to invite others from your company as well as your suppliers and customers. Click […]
NLMK Group has backed off from plans to invest in its U.S. division due to the steel duties that were imposed in 2018. The Department of Commerce has denied the Group’s request for exemption from the 25 percent Section 232 tariffs so that it can supply its facilities with steel slab. “Earlier we planned to […]
NLMK Pennsylvania says it is the “poster child for tariffs,” paying more than $160 million in duties for the steel slabs it utilizes at its operations. “I can’t imagine anybody paying more money in tariffs than we have,’’ said Bob Miller, NLMK Pennsylvania president in a recent comment to the Sharon Herald. NLMK Pennsylvania relies […]
I mentioned this in my pricing article earlier in this newsletter, but I think it bears repeating. When I was with Winner Steel (now called NLMK Sharon Coatings) we brought up two new coating lines. As each line came onstream it was imperative to get orders, so the line would run. One way to get […]
Steel Market Update celebrates its 10-year anniversary this month. In August 2008, John Packard incorporated the Steel Market Update newsletter and began selling subscriptions to those interested in learning more about what was happening in the flat rolled steel industry. As a steel veteran with more than 30 years of sales experience, Packard believed he […]
Steel Market Update celebrates its 10-year anniversary this month. In August 2008, John Packard incorporated the Steel Market Update newsletter and began selling subscriptions to those interested in learning more about what was happening in the flat rolled steel industry. As a steel veteran with more than 30 years of sales experience, Packard believed he […]
I am in Chicago this evening attending the Metals Industry Boy Scout Dinner. Joining me is Tim Triplett, so please excuse tonight’s issue if it seems a little shorter than normal. The Vietnam circumvention final ruling has been delayed another week. I was speaking to a prospective new customer yesterday and realized as I talked […]
One quick note to those who may be thinking about attending our Steel 101 workshop in Memphis. We only have a few spots left and I expect the workshop will be sold out within the next week or so. If you have an interest in attending and you have questions about the workshop, please send […]
We did a quick check of lead times at a number of domestic steel mills on Friday of this past week. This is what we learned: Steel Dynamics Industries (SDI) – Butler, Ind. HR – closed for November production Pickled – closed for November production CR – closed for November production HRG – 11/20 (4 […]
Over the course of the last four days Steel Market Update (SMU) has been conducting our mid-April flat rolled steel market trends analysis. We finished earlier this afternoon and we are providing the results of some of our findings to our readers this evening. Lead times, which is the length of time it takes to […]
We are getting mixed messages regarding “real” lead times coming out of the domestic steel mills. The information we are sharing below comes from actual mill lead times coming directly from the producing mills to their customers. This is different than the lead time averages collected by Steel Market Update and shared with our readers […]
Total foreign steel imports for the month of January were announced this past week by the U.S. Department of Commerce. Imports totaled 2,814,081 net tons or about 120,000 tons more than December and slightly above the twelve month and three month moving averages. At the same time license data was updated for February imports and […]
NLMK USA has restarted its #2 hot-dip galvanizing line at the Sharon Coating facility in Pennsylvania in response to increased domestic demand. The #2 line had been idled since 2002 due to weak demand in the U.S. galvanized steel market. The line has a capacity of approximately 226,000 metric tonnes per year (249,118 tons) and […]
There are a number of players in the market that are overly concerned (in my opinion) about the restart of the USS Granite City hot strip mill (they are not yet restarting the two idled blast furnaces so they are not adding any new raw steel production into the market) and Mingo Junction (reported to […]
NLMK USA will re-start production on their #2 galvanizing line at Sharon Coatings in late January. “We should start coating steel late January. The demand for our products is solid, especially for the coated products and restarting line 2 will allow us to better service the light gage requirements of both service center and OEM […]
Once per month HARDI* wholesalers conduct a galvanized steel conference call so they can better understand what is happening in the broader markets as they deal with steel pricing, demand and inventory issues. The HARDI monthly call was held on Wednesday, November 9, just one day after the presidential election. Not surprisingly, the future of […]
Steel Market Update is celebrating our 8th Anniversary. People ask me how I can do what I do on a daily, weekly, monthly and yearly basis? After all, I have been doing this over the past 8 years when most people my age would be thinking of slowing down and planning for their retirement. I […]
For many years, SMU publisher John Packard sold ultra light gauge galvanized steels (.019”-.010”) into the furnace pipe manufacturers across the United States and Canada. This product is one that is not championed by the domestic steel industry as the domestic steel mills would rather run thicker steels (more tonnage per hour through their mills) […]
The following article was written by SMU founder and publisher, John Packard with the assistance of Platts Content Director, Metals Americas, Joseph Innace. Shortly after Steel Market Update (SMU) became a real company I understood the need for the flat rolled steel industry to have an pricing index which was independent and not tied as […]
Over the past few weeks Steel Market Update has been reviewing the lead times being published and/or provided to their customers in order to see if there are any significant changes. As a general statement we have found cold rolled and coated steels (galvanized, Galvalume, galvannealed) have extended lead times and are the tightest of […]
Spot lead times have begun to move out according to the lead time sheets shared with customers this week by their domestic mill suppliers. The most strength was seen in cold rolled and coated steels while hot rolled lead times remained stuck at 3-4 weeks in most cases. Steel buyers continue to prognosticate that there […]
The U.S. Department of Commerce updated license data for foreign steel imports for the month of July. Based on the just released data it appears July imports will be approximately 200,000 net tons higher than what was received during the month of June. However, when looking at imports from a 3 month moving average and […]