You will notice a couple of changes in our Comparison Price Indices (CPI) report. The U.S. and Canadian steel mills have adjusted their extras for placing zinc on the surface of steel (galvanized). One of the items referenced in the CPI is .060” G90 which prior to this week was based on a $3.45/cwt ($69 […]
We are five and a half months (5.5) or 166 days away from the opening of our 7th SMU Steel Summit Conference in Atlanta, Georgia. We went over 100 registrations today and we expect 500+ registrations when we get into the month of August. There are four companies that we know of that will be […]
Most of the flat rolled steel mills have made changes to their zinc coating extras to either be effective immediately or by the beginning of April 2017. The new extras replaced those that became effective November 2016 through January 1, 2017. The extras were raised due to the increasing cost associated with zinc purchases needed […]
Steel Market Update (SMU) has adjusted our Price Momentum Indicator to reference spot prices as moving higher from this point over the next 30 days. Our decision to move our indicator is due to the continued high prices for steel mill inputs, such as 62% Fe iron ore fines in China being sold at $91.50/dmt […]
The following article was written by Mario Briccetti, one of our Steel 101 workshop instructors and the director of the consulting firm: Briccetti & Associates. Mario has written other articles about the costs associated with coating galvanized and Galvalume steels. Those articles can be found in our website in the “Steel Buyers Basics” section of […]
On Wednesday, February 22, 2017, California Steel Industries (CSI) sent a letter to their customers advising them of their intention to adjust their extras used when pricing galvanized steels in various thicknesses and coating weights. LME Zinc pricing has been on a tear over the past year as it has moved from $0.80 per pound […]
Scrap, scrap, scrap, scrap and scrap…that is what everyone is going to be talking about for the next week to ten days. David Feldstein in tonight’s HRC Futures article suggested prime grades could go higher in March by as much as $80 per gross ton. I have read articles that suggest the numbers could be […]
Employees at a zinc processing facility in Quebec have gone on strike raising concerns for metal producers that use the alloy in galvanized steel. CEZinc, in Salaberry-de-Valleyfield, Quebec is co-owned by Glencore and Noranda Income fund. Employees say the company demanded major pension concessions, despite an over-funded pension plan, and has rebuffed union suggestions for […]
Galvanized steel buyers need to remain aware of the movement in zinc pricing. With the strike at the zinc-processing facility in Canada there is a possibility that zinc supplies could tighten here in the United States. Zinc prices have been trading on the LME in the $1.30-$1.35 per pound over the past week. At the […]
The following article is the opinion of John Packard, Publisher, Steel Market Update. I haven’t gone back and reviewed the records as to how many times flat rolled steel prices moved higher after a quick run up followed by a stable to slightly down market for a couple of weeks. Probably less than the fingers […]
It has been four weeks since the last HARDI galvanized steel conference call. The call provides a forum for the HARDI HVAC wholesalers and other associated HARDI members to discuss trends affecting galvanized steel prices. Over the past four weeks market prices have eased a bit but many of the factors that drive prices are […]
ArcelorMittal said it expects global apparent steel consumption to grow between 0.5 and 1.5 percent in 2017, compared to 1.0 percent growth last year. Underlying demand is expected to pick up in Europe supported by the automotive market, but apparent demand growth in the region is forecast at a modest 0.5-1.5 percent compared to 2 […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. Looking back from the […]
Today is the last day in the month of January 2017. The following is our monthly review of key data collected by Steel Market Update during the month including a number of our own proprietary indices and indicators. SMU Price Momentum is ending the month pointing toward higher prices ahead. We do admit that there […]
Steel Market Update (SMU) received the following question from one of our readers: “We are a galvanized sheet metal fabricator. We purchase around 5 million pounds a year (mostly 26ga-14ga). I was hoping you could help us out. We have not had to raise prices in years but galvanized pricing has steady risen over the […]
Steel Market Update participates in a monthly steel conference call hosted by HARDI (Heating, Air-conditioning, Refrigeration Distributors International). The call is dedicated to a better understanding of the galvanized steel market. The HARDI wholesalers are responsible for the supply of sheet steel and coil as well as other products to the mechanical contractors involved with […]
The last month of the year was a strong one based on the data we just reviewed and have shared with you in the table at the end of this article. SMU Price Momentum Index finished both the month and the year pointing toward higher prices in the coming 30 to 60 days. Our Sentiment […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. Looking back from the […]
We are but a few days away from the beginning of the New Year. We thought it prudent as we plan for 2017 that we take a look at what transpired with flat rolled steel prices over the course of the past 12 months. Because the market “bottomed” in December 2015 we have expanded our […]
Steel buyers and executives associated with the service center industry are reporting to Steel Market Update that end users are accepting that we are in a higher priced flat rolled steel environment and most have placed their first quarter 2017 tons. The expectation is for the market to “pause” here due to the holidays which […]
To date the domestic steel mills have announced four flat rolled price increases totaling a minimum of $140 per ton ($7.00/cwt) going back to October 21, 2016. As of today the U.S. steel mills are looking for base price levels on new orders to be placed for the 1st Quarter 2017 to be a minimum […]
I am sitting in Colorado Springs, Colorado after having spent the last few days attending the HARDI annual conference. I have been a member of HARDI and have participated in their steel committee for many years. After I stopped selling steel and began Steel Market Update as my main focus I was invited to remain […]
The first thing that jumps out at you when reviewing the end of the month data for November is the pace of the price index averages as they push toward $600 hot rolled (which we believe we may hit by the end of the calendar year). Our monthly average at $522 per ton was $11 […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. At the end of […]
Steel Market Update went out to a couple of hundred steel buyers and executives today as we probe for information about flat rolled steel prices. At the same time we asked questions about price direction and demand. Tonight we will cover price direction (prior to AM increase announcement) and on Thursday we will cover their […]
As of late this afternoon www.Kitco.com was reporting zinc spot pricing around $1.22 per pound. Zinc recently reported prices not seen in the past 9 years and those of you buying galvanized and Galvalume steels need to be aware of how zinc is trading. The U.S. steel mills published new extras just as zinc pierced […]
Many service centers and end users in Colorado and east of the Rockies have known for years that California Steel and USS/POSCO have lower galvanized coating extras than the domestic steel mills located outside of California. On Sunday we published a number of the new extras published by many of the mills located outside of […]
Over the past week the domestic steel mills have been revising their galvanized coating extras due to the higher prices for zinc which ended the week at $1.1412 per pound. We have managed to collect a number of the mill extras and we thought our readers would like to see a comparison of the extras […]
On Monday NLMK USA advised their customers of their intention to begin collecting new zinc extras on galvanized steel products effective immediately. The new extras are in response to zinc spot prices being at the highest level in the past five years. Zinc closed Monday at $1.1716 per pound up $0.0608 since this past Friday […]
US Steel announced new coating extras for galvanized steel on Tuesday. A letter from the company to customers stated the new extras are due to rising zinc prices. The letter from US Steel to its customers is reproduced below as well as the new coating extras chart: