Category: Mexico

Latin American steelmaker Ternium remains optimistic that positive trends in the Mexican market will help it to continue increasing its market share.

While Ternium is expecting an increase in shipments in the current quarter, a decrease in earnings is also anticipated due to lower international steel prices and higher unit costs.

Our sheet prices are down again this week. Some of you think it’s a sign of something ominous, others think it’s just a case of seasonality. It might help to step back and put things in perspective.

Kloeckner Metals Corp. has completed the acquisition of National Material of Mexico.

Ryerson said it expected demand to weaken in the near term after it reported a slump in second-quarter earnings. The Chicago-based service center group reported net income of $38 million in Q2’23, down 81% from $196 million a year earlier on revenue that fell 23% to $1.34 billion. “Shifting consumer spending patterns, higher interest rates, […]

Ryerson said it expected demand to weaken in the near term after it reported a slump in second-quarter earnings.

Mexican steelmaker Altos Hornos de México (AHMSA) said there could be an “indefinite” delay to the restart of production because of a blockade by activists.

Mexican steelmaker Altos Hornos de México (AHMSA) said there could be an “indefinite” delay to the restart of production because of a blockade by activists. The company said its steel plants in Monclova, Coahuila state, were blockaded by activists of the Sindicato Nacional Minero (National Mining Union), which represents AHMSA’s striking workers, according to a […]

Mexican steelmaker Ternium could benefit if the US places new steel tariffs on Mexico, according to New York-based investment firm Morgan Stanley. “First, if the US were to levy tariffs on steel imports from Mexico, we believe the government of Mexico would likely respond with a similar measure. Second, due to its product mix, Ternium would likely benefit […]

An unusual clash of powerful forces is in full swing over tin mill products. An antidumping petition was filed against eight countries in January of this year, while an anti-subsidy petition was filed against imports of tin mill products from China at the same time.

There is a lot going on at SMU right now. We’re going to be rolling out a new website over the next few days. We’ve also got more than 1,200 people registered to attend Steel Summit this year, putting us on pace to potentially break last year’s attendance record of nearly 1,300. The event is […]

There is a lot going on at SMU right now. We’re going to be rolling out a new website over the next few days. We’ve also got more than 1,200 people registered to attend Steel Summit this year, putting us on pace to potentially break last year’s attendance record of nearly 1,300.

An unusual clash of powerful forces is in full swing over tin mill products. This flat-rolled steel product is used to make “tin cans” that hold a huge array of food products and other metal containers sold throughout the world. Tin mill products are generally made from cold-rolled steel that is coated with tin or […]

Mexican steelmaker Ternium could benefit if the US places new steel tariffs on Mexico, according to New York-based investment firm Morgan Stanley. “First, if the US were to levy tariffs on steel imports from Mexico, we believe the government of Mexico would likely respond with a similar measure. Second, due to its product mix, Ternium would likely benefit […]

A preliminary count of imports during the month of June shows little changes from SMU’s previously reported import license analysis. Total imports were 2,792,674 net tons in June’s preliminary count by the US Department of Commerce. As SMU reported earlier this month, that’s the highest level imports have been over the past year. Flat-rolled imports […]

ArcelorMittal’s earnings increased sequentially in the second quarter of 2023, but fell on-year, with recent acquisitions in Brazil, Texas, and Mexico contributing to underlying performance. The Luxembourg-based steelmaker posted net income of $1.86 billion in Q2’23, up 70% from $1.1 billion in the prior quarter, but down 59% from $4.49 billion a year earlier on […]

ArcelorMittal’s earnings increased sequentially in the second quarter of 2023, but fell on-year, with recent acquisitions in Brazil, Texas, and Mexico contributing to underlying performance.

A preliminary count of imports during the month of June shows little changes from SMU’s previously reported import license analysis, so here we take a look at where all that steel is coming from

Hot-rolled coil (HRC) prices fell for a second consecutive week as mills appear to have given up holding the line on $900 per ton ($45 per cwt) and amid discounting into the high $700s per ton.

Hot-rolled coil (HRC) prices fell for a second consecutive week as mills appear to have given up holding the line on $900 per ton ($45 per cwt) and amid discounting into the high $700s per ton. SMU’s average HRC price now stands at $830 per ton, down $40 per ton from a week ago and marking […]

Fort Wayne, Ind.-based steelmaker Steel Dynamics Inc. is taking advantage of opportunities in the Mexican steel market and plans to continue doing so moving forward. Executives discussed some of those opportunities on the company’s second-quarter earnings conference call on Thursday, July 20. The location and capabilities of SDI’s newest flat-rolled steel mill in Sinton, Texas, […]

Fort Wayne, Ind.-based steelmaker Steel Dynamics Inc. is taking advantage of opportunities in the Mexican steel market and plans to continue doing so moving forward.

We’re just a month out from Steel Summit, so I decided to go back and check on how things look now compared to ~30 days ahead of the event last year. For starters, approximately ~1,100 people are registered to attend the event on Aug. 21-23 in Atlanta. That puts us on track to meet or […]

We’re just a month out from Steel Summit, so I decided to go back and check on how things look now compared to ~30 days ahead of the event last year. For starters, approximately ~1,100 people are registered to attend the event on Aug. 21-23 in Atlanta. That puts us on track to meet or […]

Steel Dynamics Inc. (SDI) posted lower year-over-year second quarter profits but said demand “remains solid” across the automotive, construction, industrial, and energy sectors. The Fort Wayne, Ind.-based steelmaker also predicted that steel prices might find support thanks to what it described as low customer inventories. “We remain confident that market conditions are in place for […]

Steel Dynamics Inc. (SDI) posted lower year-over-year second quarter profits but said demand “remains solid” across the automotive, construction, industrial, and energy sectors. The Fort Wayne, Ind.-based steelmaker also predicted that steel prices might find support thanks to what it described as low customer inventories. “We remain confident that market conditions are in place for […]

On Steel Market Update’s most recent Community Chat, we caught up with Timna Tanners, managing director of Wolfe Research, to hear her latest take on the steel market.

On Steel Market Update’s most recent Community Chat, we caught up with Timna Tanners, managing director of Wolfe Research, to hear her latest take on the steel market. Tanners chatted with SMU managing editor Michael Cowden about the myth of mill discipline within the sheet market. The market isn’t much more disciplined than a few […]

Every day, it seems, the headlines point to a general decline in the global situation. The more one reads, the more it becomes clear that our major issues are all interconnected. Addressing one will necessarily impact the others, either worsening or bettering them. Immigration is a prime example of this phenomenon. The two parties, and […]

South Korean steelmaker Posco has big plans to increase its global production capacity, including the making of electrical steel in North America, according to local media reports. The Korea Times reported that Posco is planning to “build additional hyper non-oriented electrical steel factories in Korea and North America to produce 1 million tons of electrical […]