After a month of small increases, steel mill capacity utilization dipped last week to 80.2 percent. The mills have still kept production above the benchmark 80 percent level for the past five weeks, since the week ending July 6. Raw steel production for the week ending Aug. 10 totaled 1,867,000 net tons, a decrease of […]
Total U.S. raw steel production in the month of June declined 4.1 percent to 7,984,988 net tons, reports the American Iron and Steel Institute in Washington. This is the first time monthly production levels have dipped under eight million tons since February 2019. Although down over the previous month, June production is only slightly below […]
HarbisonWalker International, a manufacturer of refractory products for the steel industry, announced completion of the first phase of a $9 million investment in its manufacturing plants in North America. Phase one increased warehouse space by 35 percent at the White Cloud, Mich., facility, using American-made steel. Additional manufacturing space will house new production technologies, including […]
Year to date, June, total hot rolled coil imports were down by 28.2 percent, but the Great Lakes region was down by 38.4 percent and the Atlantic North was up by 21.3 percent. SMU now offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on hot rolled coil, is designed to plug the gap between the two. We will report data for regional imports for each […]
Year to date, June, total cold rolled imports were down by 23.4 percent, but the Gulf North was down by 53.2 percent and the Rio Grande was up by 5.7 percent. SMU now offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on cold rolled coil, is designed to plug the gap between the two. We will report data for regional imports for each […]
Year to date, June, total hot dipped galvanized imports were down by 44.9 percent. All regions except the Rio Grande were down. The Rio Grande was up by 46 percent. SMU now offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume by […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on hot-dipped galvanized sheet, is designed to plug the gap between the two. We will report data for regional imports for each […]
Year to date, June, total other metallic coated imports (mainly Galvalume) were down by 11.8 percent, but the Pacific North was down by 71.8 percent and the Great Lakes region was up by 110.5 percent. SMU now offers a comprehensive series of import reports ranging from the first look at licensed data to the very […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on other metallic coated sheet, is designed to plug the gap between the two. We will report data for regional imports for […]
Year to date, June, total cut-to-length plate imports were down by 5.1 percent, but the Great Lakes region was down by 43.3 percent and the Gulf region was up by 201.4 percent. SMU now offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on cut-to-length plate, is designed to plug the gap between the two. We will report data for regional imports for each of […]
Year to date, June, total coiled plate imports were down by 18.4 percent, but the Great Lakes region was down by 28.5 percent and the Gulf was up by 44.4 percent. SMU now offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to a detailed look at volume by district of entry and source nation. This report, on coiled plate, is designed to plug the gap between the two. We will report data for regional imports for each of […]
Nucor’s Plate Mill Group informed customers on Friday that it is raising the price of carbon, alloy and heat-treated plate by $40 per ton ($2/cwt), effective immediately on all new and unconfirmed orders. This is Nucor’s second price hike on plate products in the past two weeks, following on a $40 increase July 26. Steel […]
On the surface, steel imports appear to have increased substantially in July, based on license data from the Commerce Department. While the figures are preliminary, they put total imports for July at 3.5 million tons, a million tons above average. Skewing the data are the licenses for semi-finished imports, which registered about 1.6 million tons. […]
The U.S. exported 600,000 tons of steel in June, according to final Census data, a 5 percent slip from May, and down 34 percent from the same month one year ago. June exports were in line with the 2018 average (~610,000 tons), but down significantly compared to the past few years. This time last year, […]
Steel mills continue to press for higher prices and this week SMU found success on everything but hot rolled coil, which continues to lag behind the rest of the flat rolled market. We found that maintenance at Steel Dynamics and other mills over the next 30-45 days is weighing on some steel buyers. Here is […]
Steel mill capacity utilization has been inching upward for the past month and registered 81.5 percent in the week ending Aug. 3 as the domestic mills benefit from higher steel prices. The last time the mills operated at this rate was mid-May. Raw steel production for the week ending Aug. 3 totaled 1,897,000 net tons, […]
By CRU Analyst Michelle Liu Rising trade tensions between the U.S. and China have driven one of the largest w/w falls in iron ore prices, a drop of $21 /t w/w to $98 /t. The U.S. president’s threat of imposing 10 percent tariffs on the remaining $300 billion worth of Chinese imports last Friday has escalated trade […]
By CRU Senior Analyst Erik Hedborg Iron ore prices continued to decline in the past week as international steel prices continued to fall on a weak demand outlook for steel in the coming month. On Tuesday, Aug. 13, CRU assessed the 62% Fe fines price at $90.30 /t, down $7.70 /t w/w. Steel prices in […]
Zekelman Industries plans to build what it claims will be the world’s largest continuous ERW tube mill in Blytheville, Ark., on property adjacent to its existing Atlas Tube mill. Startup of the new mill is scheduled for September 2021. “Having two mills within close proximity of each other will only increase our organization’s efficiency. We […]
Domestic steelmakers appear to be collecting at least some of the price increases they have announced on flat rolled steel. Steel Market Update data shows prices for hot rolled, cold rolled and galvanized steel up by $10 to $25 per ton over last week. The mills hope to do the same with steel plate, announcing […]
Following Nucor’s lead on Friday, ArcelorMittal USA, EVRAZ and SSAB Americas informed customers this week that they are raising the spot price of their plate products by a minimum of $40 per ton ($2/cwt), effective immediately. ArcelorMittal and EVRAZ informed customers verbally, SMU was told, while SSAB distributed a letter stating that the $40 per […]
Steel mill capacity utilization inched up for the third week in a row to nearly 81 percent last week as the domestic mills seek to capitalize on higher prices in the marketplace. Raw steel production for the week ending July 27 totaled 1,884,000 net tons, an increase of 0.6 percent from the previous week, as […]
By CRU Senior Analyst Erik Hedborg Iron ore prices were steady in the past week as mills in China continue to demand spot cargoes while inventories at ports and mills remain low. Seaborne supply has, although somewhat improved, remained relatively weak as we conclude the month of July, a month that typically has lower Australian […]
Last week, Steel Market Update conducted our mid-July flat rolled and plate steels market trends analysis. We invited 480 individuals representing 450+ companies to participate in our questionnaire. We intentionally concentrate on inviting manufacturing (40 percent last week) and service centers (45 percent last week) as well as steel mills, trading companies and toll processors […]
Nucor’s Plate Group notified customers on Friday that it is raising the price of carbon and alloy plate and heat-treated plate by a minimum of $40 per ton ($2/cwt), effective immediately on all new spot orders. “In recent weeks, plate pricing has fallen to unsustainable levels. While end-use demand and project business remains stable, the […]
The surge in the price of iron ore and the decline in the price of scrap continued through mid-July, benefiting the EAF producers in the U.S. over the integrated mills Table 1 summarizes the price changes through July of the five materials considered in this analysis. It reports the month/month, 3 months/3 months and 12 […]