“Fragile and uncertain” is how the Organization for Economic Cooperation and Development (OECD) describes the current global economy. The OECD’s latest Interim Economic Outlook shows economic growth slowing as escalating trade conflicts impact confidence and investment and increase downside risks in financial markets. In May of 2018, the OECD was predicting global growth of 4 […]
SMU contributor Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in […]
The growth of manufacturing in the U.S. is slowing, and on a single-month basis the ISM index became negative in August. This does not bode well for the balance of 2019 or for 2020, according to Steel Market Update’s analysis of 11 manufacturing indicators. This report summarizes 11 data streams that describe the state of […]
The composite producer price index of all commodities has been relatively stable in 2019, but tinware products are becoming very uncompetitive against aluminum. This report is an analysis of Bureau of Labor Statistics data performed by staff of Steel Market Update and is intended to provide subscribers with a view of the competitive position of […]
The U.S. dollar has weakened against 11 of the 16 steel trading nation currencies in the last month and against eight in the last three months. In this report we examine the change in currency values of the 16 preeminent global steel and iron ore trading nations. The currencies of these 16 don’t necessarily follow […]
The Empire State Manufacturing Index surprised economists by slipping to 2.0 on the general business index, a three point decline from August. The new orders index fell three points to 3.5, but remained above zero indicating only slight growth. The shipments index declined four points to 5.8 for it lowest level in nearly three years. […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
The rate of job creation in August slowed to 130,000 and was helped by the addition of 25,000 temporary Census workers, according to Steel Market Update’s analysis of the latest Bureau of Labor Statistics data. Net job creation in August declined to 130,000 from a downwardly revised 159,000 in July. June was revised […]
Job creation in August was disappointing even after being boosted by the addition of thousands of temporary Census workers. In August, 3,000 jobs were created in manufacturing industries and 14,000 in construction activities. A reported 96,000 jobs were created in the private sector and government gained 34,000 positions. The federal government employment result was swelled […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel In the last 30 days we have seen the prices in the HR forward curve drop by an average of $70/ST […]
Despite slight upward momentum in steel pricing in August, steel buyers’ sentiment languished in the +40s on SMU’s index. This tepid optimism likely reflects widespread concerns in the market about steel demand in the second half and the staying power of steel prices following the recent increases announced by the mills. The average price for […]
The Conference Board measure of consumer confidence is quite a volatile indicator, therefore we prefer to smooth the data with a moving average to reduce monthly variability. The composite value of consumer confidence in August was 135.1 with a three-month moving average (3MMA) of 131.7. June’s result of 124.3 now appears to be an outlier […]
World steel production is down this year. Between May and July, global steel production declined by 4.1 percent. For the year, steel output is down by 0.9 percent, excluding China which continues to overproduce. Capacity is calculated to be 2.4 billion metric tons and capacity utilization in July was 79.0 percent, according to the latest […]
The ISM Manufacturing Index fell to 49.1 percent in August from 51.2 percent in July indicating a contraction in business activity and the lowest level since the 48.0 percent reading in January 2016. “Comments from the panel reflect a notable decrease in business confidence,” said Timothy R. Fiore, chairman of the Institute for Supply Management […]
The global manufacturing sector downturn continued to worsen in August. The J.P.Morgan Global Manufacturing PMI posted a 49.5 for its fourth month of contraction. More than half of the nations surveyed by J.P.Morgan and IHS Markit had PMI readings below the neutral 50 mark last month, with Germany and the Czech Republic declining at the […]
The metalforming sector continues to express uncertainty about near-term business conditions, according to the August 2019 Precision Metalforming Association Business Conditions Report. The August report shows that 27 percent of participants anticipate an improvement in economic activity during the next three months (an increase from just 16 percent in July), 46 percent expect no change […]
The Chicago Business Barometer rose six points in August after two months of contraction. The Index posted a 50.4 last month, compared to 44.4 in July. MNI Indicators still sees an overall softening in business conditions despite the gains in August. The three-month moving average, a better indicator of conditions, fell to 48.2 Supplier deliveries […]
SMU contributor Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in […]
Don’t get too worried about a recession just yet, advised ITR economist Alan Beaulieu at the SMU 2019 Steel Summit in Atlanta this week. The economy is slowing down and consumption will be tepid for the rest of this year and into the first half of 2020. But conditions will improve in the second half […]
U.S. gross domestic product had positive growth in every region of the country in all four quarters of 2018 and in Q1 2019, according to Bureau of Economic Analysis data. The BEA introduced a new data set for GDP by state and region in 2014 and backdated it to Q1 2005. This week, the data […]
Orders for durable goods increased for a second month, gaining 2.1 percent in July, according the latest data from the Commerce Department. Transportation again led the gain with a surge of 47.8 percent for aircraft and parts. Excluding the volatile transportation category, durable goods orders were down 0.4 percent. Core capital goods, non-defense minus aircraft and […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
Material Sciences Corp. was named as one of five winners of the 2019 Altair Enlightment Award given to honor the greatest achievement in vehicle weight savings. MSC was honored for its MSC Smart Steel, a new multilayer steel laminate engineered as a direct substitute for low carbon steel stamped vehicle body parts. Offering a 20 […]
The labor productivity of nonfarm businesses grew by 2.3 percent in the second quarter of 2019. The average of the last six quarters has been 0.40 percent. Unit labor costs increased 2.5 percent year over year, according to Steel Market Update’s latest analysis of Bureau of Labor Statistics (BLS) data. Unit labor costs and productivity […]
Our analysis of 11 manufacturing indicators suggests that growth is slowing and, if trends continue, will become negative in the fourth quarter. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market […]
By CRU Principal Analyst Josh Spoores U.S. Steel recently announced its intent to withdraw from spot market-linked adjustable price contracts in 2020 (i.e. contracts where the price moves with the spot market in some way). The following offers insight on the use of such contracts and what may come about if the intended change is […]
Despite concerns over trade wars and recession, the Empire State Manufacturing Index expanded in August. The index from the Federal Reserve Bank of New York showed modest improvement in August, beating economists’ expectations. The general business index rose for a second month, increasing to 4.8 from 4.3 in July. “New orders increased after declining for […]
Job creation slowed in July but is still healthy and in its 10th year of uninterrupted expansion, according to Steel Market Update’s analysis of the latest Bureau of Labor Statistics data. In July, 16,000 jobs were created in manufacturing industries and 4,000 in construction activities. About 148,000 jobs were created in the private sector, while […]
The rate of job creation in the U.S. in 2019 is slowing, according to Steel Market Update’s analysis of the latest Bureau of Labor Statistics data. Net job creation in July declined to 164,000 from a downwardly revised 193,000 in June. June was revised down by 31,000 and May down by 10,000. Rising […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Of the eight indicators of economic health tracked by Steel Market Update, none is flashing red. Taken as a whole, they signal that the U.S. economy is safe from recession for […]