Based on Steel Market Update’s analysis of 10 indicators, U.S. manufacturing output is now contracting and articles manufactured from iron and steel are down by 6.1 percent year over year. This report summarizes 10 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. In data released in […]
The September Manufacturing ISM Report on Business showed further decline of the manufacturing sector. ISM’s PMI edged down 1.3 points to 47.8 from the August reading of 49.1. “This is the lowest reading since June 2009, the last month of the Great Recession, when the index registered 46.3 percent,” said Timothy R. Fiore, chairman of […]
Both the September and October reports on consumer confidence from The Conference Board suggest a weakening of people’s expectations. Consumer confidence as reported by The Conference Board declined more than expected in September and experienced another small decline in October. This is quite a volatile indicator and therefore we smooth the data with a […]
The growth of manufacturing in the U.S. is slowing, and on a single-month basis the ISM index became negative in August. This does not bode well for the balance of 2019 or for 2020, according to Steel Market Update’s analysis of 11 manufacturing indicators. This report summarizes 11 data streams that describe the state of […]
Do plans by U.S. mills to add millions of tons of new steelmaking capacity over the next few years make a price-killing supply glut inevitable? That’s a question very much open to debate, as shown by the spirited exchange between three leading analysts during Steel Market Update’s Steel Summit Aug. 28 in Atlanta. Despite some […]
Our analysis of 11 manufacturing indicators suggests that growth is slowing and, if trends continue, will become negative in the fourth quarter. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market […]
Nearly 1,000 executives are registered with just two weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our 9th […]
If you haven’t registered for the Premier Steel Conference in North America, then this is the time to do so. The Steel Market Update Events App, which all 900+ attendees have access to, was launched last week, meaning registered attendees are now busy organizing meetings with each other in advance to make the most of their time […]
If you haven’t registered for the Premier Steel Conference in North America, then this is the time to do so. The Steel Market Update Events App, which all 900+ attendees have access to, was launched last week, meaning registered attendees are now busy organizing meetings with each other in advance to make the most of their time […]
Most indicators of manufacturing activity are still positive, but if trends continue, growth will become negative by late summer. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications, and […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
By CRU Analysts Kevin Bai and Ruilin Wang Chinese economic stimulus in 2018 and 2019 will add a total of 21 Mt to Chinese domestic steel demand, most of which is expected to manifest in 2019. Including this, total Chinese domestic steel demand is now expected to grow at around 3 percent this year. Other […]
The day started slow, but it seems to have picked up steam after the Nucor announcement. As expected, most of the mills have followed the Nucor lead with NLMK putting specific base prices into the market. The guidance being given in the NLMK announcement is hot rolled at a $560 per ton ($28.00/cwt) minimum base […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
Most indicators of manufacturing activity are still positive, but if trends continue growth could become negative by late summer, according to Steel Market Update’s latest analysis. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately […]
By CRU Principal Economist Lisa Morrison During the last two years, we have become somewhat accustomed to waking up to some fresh, new policy idea of the Trump administration, disseminated via presidential tweet. However, the levying of tariffs on Mexican imports, as punishment for Mexico allowing Central American migrants to traverse their country in order […]
By Paul Lowrey Editor’s note: Paul Lowrey is an industry consultant and president of Steel Research Associates, LLC. He will be a featured speaker at the upcoming Steel Market Update Steel Summit Aug. 26-28 in Atlanta. Click here for more information and to register for the summit. Recent announcements of new flat rolled capacity have […]
By Paul Lowrey Editor’s note: Paul Lowrey is an industry consultant and president of Steel Research Associates, LLC. He will be a featured speaker at the upcoming Steel Market Update Steel Summit Aug. 26-28 in Atlanta. Click here for more information and to register for the summit. Recent announcements of new flat rolled capacity have […]
Economic indicators of manufacturing activity are strong, though the growth rate is slowing. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications, and therefore will be brief in this […]
Most indicators of manufacturing activity are still positive, but evidence of a slowdown is indisputable. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications and therefore will be brief […]
The Soo Locks are scheduled to reopen on March 25 to begin the new shipping season on the Great Lakes. The last vessel through the locks was the Canadian bulk-carrier Manitoulin headed for Essar Steel on Jan. 15. The locks are currently closed for maintenance prior to the start of the 2019-20 season. During the […]
The Soo Locks are scheduled to reopen on March 25 to begin the new shipping season on the Great Lakes. The last vessel through the locks was the Canadian bulk-carrier Manitoulin headed for Essar Steel on Jan. 15. The locks are currently closed for maintenance prior to the start of the 2019-20 season. During the […]
Economic indicators of manufacturing activity are strong, though the growth rate is slowing. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications, and therefore will be brief in this […]
Editor’s note: The following is excerpted from the Feb. 13 CRU Steel Sheet Monitor; editing by CRU Principal Analyst Josh Spoores. In our Steel Sheet Products Monitor last month, we asked if the market was near an inflection point. That report was published on the sixth working day of the year and, at that point, global sheet […]
Steel Market Update is pleased to include the following Premium content in this Executive issue. For more information about upgrading to a Premium-level subscription, email info@SteelMarketUpdate.com. Economic indicators of U.S. manufacturing activity are strong, though growth is slowing. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the […]
The U.S. economy is on track to grow further next year, say purchasing executives surveyed by the Institute for Supply Management, continuing the trend that began in mid-2009. In its December 2018 Semiannual Economic Forecast, ISM reported that the manufacturing sector is optimistic about business conditions in 2019, with revenues expected to increase in 17 […]
The first major winter storm of the 2018-2019 season is currently making its way up the East Coast, which means it is time to start thinking about the navigation on the Great Lakes. Right now, iron ore and coal ships are busy supplying steel mills in the Great Lakes region with enough inventory for the […]
Steel Market Update is sharing the following Premium-level article with its Executive-level members this issue. For more information on upgrading to a Premium subscription, email info@SteelMarketUpdate.com. Economic indicators of manufacturing activity remain strong. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We […]