Some leading pipe and tube producers are increasing prices by $50 per ton due to increased demand from construction and automotive-related industries, as well as higher raw material costs. On Monday, Nucor Tubular Products announced an immediate $50 increase on all new orders for HSS, pipe, mechanical and piling products. Atlas Tube followed suit on […]
By CRU Analyst Kevin Bai, from CRU’s Steel Sheet Products Monitor Domestic sheet prices in China continued to reach new highs for the year alongside further improvement in underlying sheet demand in combination with limited supply. Domestic CR coil prices went up by RMB290 /t to RMB4720 /t and HDG sheet by RMB140 /t to […]
Auto assemblies in North America have recovered rapidly since April. This report is based on data from LMC Automotive for automotive assemblies in the U.S., Canada and Mexico. The breakdown of assemblies is “Personal” (cars for personal use) and “Commercial” (light vehicles less than 6.0 metric tons gross vehicle weight rating. Heavy trucks and buses […]
Our thoughts and prayers go out to the millions of people on the West Coast who are suffering the threat and devastation of historic forest fires. The loss of life and property is staggering. And the blow to business and commerce in the region has yet to be measured. Face masks are doing double duty […]
What a difference a single month can make. Most respondents to SMU’s questionnaire this week see the mills collecting their last price increase and expect them to hike prices again sometime this month. As one executive commented: “There’s been a complete flip in the market from just 30 days ago. We went from discussions about […]
Monthly auto sales are now just estimates due to the predilection of manufacturers to report on a quarterly basis, but analysts at industry forecaster ALG estimate U.S. sales were down about 11 percent year-over-year in August, compared to a 15 percent annual decline in July. Sales increased 6 percent on a month-over-month basis. Toyota sales […]
Economic activity increased modestly in most of the U.S. in August but remained well below pre-COVID-19 levels, said the Federal Reserve in its latest Beige Book publication. “Continued uncertainty and volatility related to the pandemic, and its negative effect on consumer and business activity, was a theme echoed across the country,” said the Fed in […]
Industry sentiment, as measured by Steel Market Update, has improved to relatively healthy levels even higher than this time last year prior to the pandemic. Both the Current and Future Steel Buyers Sentiment Indexes have jumped by 20 points or more in the past month, suggesting buyers are feeling better about the market’s recovery. SMU […]
Six months of adversity was not what Leon Topalian expected when he took over the reigns of Nucor in January. But a pandemic that devastated the economy, caused demand and pricing to plummet and put the very lives of employees in jeopardy was a formidable challenge to overcome. “I’m not sure I’ve seen before in […]
How much has the market recovered from the depths of the pandemic? If steel prices are an indicator, we’ve made some progress. But is the bump we’ve seen in the past several weeks just a temporary blip or a sign that the upturn in steel demand is real and sustainable? Service center and OEM executives […]
The future of U.S. Steel and Big River Steel as one entity continues to excite CEOs from both companies. Speaking during the SMU Virtual Steel Summit this past week, U.S. Steel CEO David Burritt could barely contain his enthusiasm regarding the opportunities the marriage of the two companies will provide the iconic steel producer. Burritt […]
Orders for durable goods jumped 11.2 percent in July after rising 7.7 percent in June, posting gains for the third straight month and beating all expectations. Automotive orders drove the increase, leaping 22 percent following a robust 24 percent increase in June. Orders for core capital goods–nondefense goods excluding aircraft which are considered an indicator […]
Claiming national security concerns over a slump in the U.S. steel market, President Trump issued a proclamation late Friday that appears to amend the quota limits on Brazil, further restricting steel imports from South American nation. While it’s unclear at this point which products will be affected and to what degree, one source tells SMU […]
After knocking it out of the park during the first day of our conference, we are going to shift into cruise mode as we hit on the economy and the major end-use segments affecting the industry. We have two “new” mill CEO’s joining our conference for the first time. The Nucor and U.S. Steel exec’s […]
After knocking it out of the park during the first day of our conference, we are going to shift into cruise mode as we hit on the economy and the major end-use segments affecting the industry. We have two “new” mill CEO’s joining our conference for the first time. The Nucor and U.S. Steel exec’s […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The nation and the world saw a greater than normal number of presidential announcements in the past week. I debated Philip Bell, the president of the Steel Manufacturers Association, on issues related to Section 232 at the SMU […]
For more than 28 percent of steel buyers, business is back to pre-COVID levels already, while at the other end of the spectrum 9 percent have seen little or no recovery. For the vast majority in between, the recovery process is a slow and ongoing one. In the latest market canvass this week, SMU asked: […]
It has been almost 12 months in the making and, due to the pandemic, one of the most carefully crafted agendas ever presented for an SMU Steel Summit Conference. Here is the final agenda for this year’s “virtual” conference. All times referenced are Eastern Time. The programs on the agenda prior to 10:00 AM are […]
It has been almost 12 months in the making and, due to the pandemic, one of the most carefully crafted agendas ever presented for an SMU Steel Summit Conference. Here is the final agenda for this year’s “virtual” conference. All times referenced are Eastern Time. The programs on the agenda prior to 10:00 AM are […]
By CRU Prices Analyst George Pearson, from CRU’s Steel Monitor Sheet prices in the U.S. Midwest market were led lower by declines in HR and CR coil. The price of HR coil is now back down to the low reached in early May, though market participants have noted that low priced offers have become scarce. […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Monitor Steel markets have recovered from the depths of Covid-19 global disruption, but this has varied in pace across regions and has been stop-start in many. Indeed, as measured by CRU’s global finished steel CRUspi, finished steel prices bottomed in May at 129.3, the lowest reading […]
ArcelorMittal announce plans to build an electric arc furnace steelmaking facility at AM/NS Calvert. When completed the facility will have the capability of producing 1.5 million metric tons of steel slabs for Calvert’s hot strip mill as well as producing a wide variety of steel grades for end-users. “An electric arc furnace at Calvert makes […]
By CRU Chief Economist Jumana Saleheen and Economist Ippolito Tarabini, from CRU’s Steel Sheet Products Monitor The economy is in the midst of a recession triggered by a health crisis. That makes this recession unusual and different. Here we examine how this recession compares to previous recessions. From that we infer key features of the […]
Alliance Steel looks forward to hosting an open house later this month to show off its impressive new service center in Gary, Ind. No doubt the coronavirus will have a presence at the event, where Alliance personnel will pass out masks and hand sanitizer along with drinks and hors d’oeuvres. Indeed, COVID has been an […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Section 232 is in the news again this week. First, President Trump issued a new proclamation reimposing 10 percent aluminum tariffs on certain aluminum imports from Canada. Second, there were reports in the media that the president will […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Section 232 is in the news again this week. First, President Trump issued a new proclamation reimposing 10 percent aluminum tariffs on certain aluminum imports from Canada. Second, there were reports in the media that the president will […]
The COVID-19 pandemic is not stopping CEO Lourenco Goncalves. “We are back on track and ready to fulfill our vision for the new Cleveland-Cliffs, which includes our mines and pellet plants, AK Steel, AK Tube, Precision Partners and our new HBI plant.” Having set his sights on the auto industry and already dedicating more than […]
The COVID-19 pandemic is not stopping CEO Lourenco Goncalves. “We are back on track and ready to fulfill our vision for the new Cleveland-Cliffs, which includes our mines and pellet plants, AK Steel, AK Tube, Precision Partners and our new HBI plant.” Having set his sights on the auto industry and already dedicating more than […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot rolled futures volumes have been a bit uneven as forecast uncertainty remains while businesses continue to navigate through a difficult summer […]
Olympic Steel posted a net loss of $6.5 million for the second quarter of 2020. Sales totaled $248 million, down from $429 million in Q2 2019 due to lower average selling prices and a significant decline in shipments as a result of pandemic-related shutdowns, including the automotive industry. “As the pandemic began to affect the […]