The overall mill negotiation rate dropped this week following the July 4th holiday, though plate bucked the trend, increasing by four percentage points, according to SMU’s most recent survey data. The percentage of respondents saying steel mills were willing to talk price on plate stood at 63% this week, up from 59% two weeks ago, while […]
Sheet prices were little changed this week amid typically slower activity around the Fourth of July. Market participants said that another round of sheet price hikes might come later this week or early next to shore up an initial round of price increases announced in mid-June. In the meantime, some of the heavy discounting that […]
A round of price increases announced by domestic mills in mid-June appears to have stabilized pricing for hot-rolled coil for the time being. Meanwhile, rumors of another round of price hikes ping-ponged around the market on Tuesday, with sources predicting another wave of hikes sometime between this week and mid-July. SMU’s average HRC prices stands […]
Companies should keep a watchful eye on pricing and lead times, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) speaking on the June 27 meeting of its Sheet Metal/Air Handling Council. During May’s meeting, most HARDI participants thought that prices would continue to drop. Over half of the individuals thought it […]
The overall mill negotiation rate was steady this week, though plate was an outlier, jumping 16 percentage points, according to SMU’s most recent survey data. The percentage of respondents saying steel mills were willing to negotiate price on plate rose to 59% this week, up from 33% two weeks ago. Every two weeks, SMU asks […]
In SMU’s market check this week, lead times for sheet and plate pulled back to some of the shortest times seen in several months. To see lead times this short, we have to go back to March for plate, January for galvanized sheet, and December for hot-rolled, cold-rolled, and Galvalume sheet. With mills pushing for […]
We are counting down the days until SMU’s Steel Summit Conference on Monday-Wednesday, Aug. 21-23, in Atlanta. It’s only a little over two months away. Approximately 755 people have already registered. Our discounted room blocks are almost gone. Register here. The event will again be held at the Georgia International Convention Center, a massive conference center in close […]
Sometimes the skills we obtain through our education can be used in ways other than we expect. Roger Walburn is a metallurgist who uses his specialty to help customers find the perfect fit. His knowledge of metallurgy enables him to get into the weeds with the technical aspects of steel, which educates his customers on […]
Sheet prices fell at a more modest pace this week after a sharp decline last week, as business seemed somewhat curbed. After Memorial Day prices fell, leading to the sharpest price drop since June 21, 2022. Now, the slide seems to have temporarily cooled, though sources indicated it was almost exclusively due to a lack of activity. SMU’s hot-rolled […]
Steel Market Update’s latest survey shows movements in lead times were varied across products this week, with hot rolled falling below the 5-week mark for the first time since early February. The average lead times for hot-rolled, cold-rolled, and galvanized sheet all fell back slightly from our market check two weeks ago, while those for […]
The percentage of respondents saying steel mills were willing to negotiate on price stayed relatively flat this week, up one percentage point from two weeks ago, according to SMU’s most recent survey data. Plate bucked the general trend, being the only product surveyed by SMU to fall below 50% of respondents saying steel mills were […]
Sheet prices fell hard across the board this week as business ramped back up after Memorial Day. Recall that prices were steady last week largely because of a lack of activity following the holiday. SMU’s hot-rolled coil price now stands at $935 per ton ($46.75 per cwt), down $55 per ton a week ago and […]
Sheet prices were flat or down only modestly this week, the first period of relative stability since mid-April. But several market participants said the flattish trend reflected limited activity around Memorial Day rather than stability in the broader market. Mills remain willing to negotiate spot prices and to match lower prices from their competitors, some […]
Steel buyers across all products surveyed by SMU this week are finding mills more willing to negotiate lower spot pricing vs. two weeks ago. Galvanized saw the percentage of buyers saying mills were willing to talk price climb to 100% this week, up from 90% at the previous market check, while cold rolled rose 28 percentage […]
Steel mill lead times have encountered some of the biggest two-week declines we’ve seen for some time, to the lowest levels we’ve seen since mid-March, according to SMU’s latest steel market survey data. Hot rolled in particular saw the steepest two-week decline since late January 2022, when lead times dropped by 0.86 weeks. This week, […]
SMU’s domestic hot-rolled coil price has fallen below $1,000 per ton ($50 per cwt) for the first time since early March as a broad-based sheet price decline picks up speed. Our HRC price now stands at $990 per ton on average, down $50 per ton from $1,040 per ton last week and off $170 per […]
Prices for steel sheet continue to move lower as market participants debate how far and how fast prices might fall before they reach bottom. Some are also questioning when and how quickly prices might rebound. But most don’t see that happening until the back half of the year. SMU’s hot-rolled coil price has in the […]
Steel mill lead times continue to decline for hot rolled, galvanized, and Galvalume products, while cold rolled and plate ticked up slightly, according to SMU’s latest steel market survey data. Lead times took a downard turn in mid-April after climbing for nearly five months. SMU’s hot-rolled lead time is 4 to 8 weeks with an average of […]
Steel sheet buyers find mills more willing to negotiate lower spot pricing now than at any time since late November, according to SMU data. All the sheet products SMU tracks saw mills more willing to talk price this week. Plate bucked that trend. Every two weeks, SMU asks steel buyers whether domestic mills are willing to negotiate […]
Sheet price continued to decline this week on increased supply, shorter lead times, and aggressive pricing from some domestic mills. Also pressuring steel prices were expectations of lower scrap prices and import competition. SMU’s hot-rolled coil price now stands at $1,070 per ton ($53.50 per cwt), down $35 per ton from $1,105 per ton last […]
Licenses to import steel into the US declined from March to April, with all major flat-rolled product categories showing month-on-month (MoM) declines, according to the latest figures from the Department of Commerce’s US Steel Import Monitor. Import licenses totaled more than 2.292 million net tons in April. This was a 12% drop from March’s final import […]
US hot-rolled coil prices slipped for a third consecutive week as market participants debated whether and when the declines might accelerate. Another big question: where the new floor for HRC might be? SMU’s hot-rolled coil price dipped to $1,105 per ton ($55.25 per cwt), down $15 per ton from last week and down $55 per […]