Each month the Commerce Department issues its Construction Put in Place (CPIP) data, usually on the first working day covering activity two months earlier. March data was released on Monday May 2nd. Construction Put in Place is based on spending work as it occurs, estimated for a given month from a sample of projects. In […]
The annualized GDP growth rate in the first estimate of the first quarter of 2016 was 0.54 percent, down from 1.38 percent, in the fourth quarter of 2015. Normally there are two revisions of the first estimate and sometimes three. Revisions to the four quarters of 2015 were +0.4 percent, +1.59 percent, +0.5 percent and […]
Economists participating last week in the CMD Webinar: Is Construction Gaining or Waning were generally optimistic about the economy and forecast for construction growth. Although some sectors of construction peaked last year, growth is continuing in almost all areas, although at a slower pace. During the webinar, chief economists Ken Simonson, Associated General Contractors of […]
The Dodge Momentum Index rose 0.6 percent in April to 116.5 from a revised March reading of 115.8. Planning for commercial construction increased 0.8 percent and institutional planning rose 0.4 percent. Institutional planning, although volatile on a month-to-month basis, continues to recover and is now seven percent above year ago levels. The pace for commercial […]
The Bureau of Labor Statistics (BLS) reported on Friday in their analysis of non-farm employment that 160,000 jobs were added in April, down from 208,000 in March. February and March were revised down by a total of 19,000. An explanation of the BLS report is included at the end of this piece. The three month […]
The Associated General Contractors of America, on May 1, released their March analysis of construction spending. Construction spending in March 2016 was at a seasonally adjusted annual rate of $1.138 trillion. SMU looked back at past March analyses and found an upward trend in spending for the month. In March 2014 construction spending totaled $943 […]
On April 29, 2016, the Department of Commerce initiated an antidumping duty (AD) investigation of imports of certain carbon and alloy steel cut-to-length plate (CTL plate) from Austria, Belgium, Brazil, China, France, Germany, Italy, Japan, Korea, South Africa, Taiwan, and Turkey, and countervailing duty (CVD) investigations of imports of CTL plate from Brazil, China, and […]
Olympic Steel reported a narrower than expected net loss of $767,000 for first quarter 2016. Revenues were $258.3 million compared to $346 million in Q1 2015 due to lower prices and volume. First quarter shipments increased, however 16 percent from fourth quarter 2015 recapturing market share from last year’s declining marketplace. “We successfully navigated challenging […]
Last week Steel Market Update reported our Steel Buyers Sentiment Index as being at record highs. Buyers and sellers of flat rolled steel are very optimistic about their company’s ability to be successful not only in the current market but three to six months out into the future as well. When looking at Sentiment from […]
The S&P/Case-Shiller U.S. National Home Price Index indicated home prices continued to rise over the past 12 months but at a slower growth rate. The 20-City Composite gain was 5.4 percent year over year in February, down from 5.7 percent in January. The composite gained just 0.7 percent on month over month base after seasonal […]
Steel Market Update is a member of an association connected to the construction industry called HARDI. HARDI stands for Heating, Air-conditioning & Refrigeration Distributors International. HARDI and The Institute for Trend Research (ITR), an economic forecasting company, work together to gather economic data to provide a forecast to the HARDI members located in the United […]
The American Institute of Architects (AIA) reported the March ABI score was 51.9, up from 50.3 February and indicating an increase in design services. The new projects inquiry index was 58.1, down from a reading of 59.5 the previous month. “The first quarter was somewhat disappointing in terms of the growth of design activity, but […]
First, Steel Dynamics Industries (SDI) reported an increase in steel shipments (+17%) and that they were continuing to grow, “…across all divisions but most significant in flat rolled.” They went on to report customer inventory levels are now “better aligned with actual demand, which is supporting increased domestic steel production and now also flat rolled […]
Steel Market Update is a member of an association connected to the construction industry called HARDI. HARDI stands for Heating, Air-conditioning & Refrigeration Distributors International. HARDI and The Institute for Trend Research (ITR), an economic forecasting company, work together to gather economic data to provide a forecast to the HARDI members located in the United […]
Steel Dynamics announced a strong quarter with net income of $63 million on net sales of $1.7 billion for first quarter 2016. Steel operating income increased 104 percent to $136 million from fourth quarter due to a 17 percent improvement in shipments which totaled 2.12 million tons. Average steel selling price dropped $40 from Q4 […]
Housing starts plummeted in March, according to Commerce Department data. Housing starts fell 8.8 percent to a seasonally adjusted annual rate of 1,089,000, well below economist projections. Housing permit authorizations also declined in March by 7.7 percent, indicating a cooling of momentum during the housing construction market’s busiest season. Single family housing starts were at […]
The United Steelworkers filed a petition this week under Section 201 of U.S. trade law to attempt stem imports of primary unwrought aluminum. We are reporting on this because a number of companies/organizations having begun calling for the use of Section 201 to help stem unwanted steel imports (see article in tonight’s newsletter written by […]
NLMK USA crude steel production of 160,000 tonnes was a 94 percent increase quarter over quarter and a 68 percent increase year over year. The jump in production was due to the re-launch of steelmaking at NLMK Indiana after repairs at the end of 2015 as well as from improved steel demand. Capacity utilization improved […]
Both these data points are reported in the Federal Reserve G17 data base. This month the historical data has been revised and we have updated our files back to January 2000. The index had an all-time high of 106.40 in January 2015 but on a month over month basis has declined for 13 of the […]
There is still no light at the end of this tunnel except for coated products which have had three months of shipment growth on a tons / day, (t / d) basis. Total service center carbon steel shipments increased by 142,100 tons in March to 3.176 million tons. This increase was driven by the number […]
Mill Steel Company, one of the nation’s largest distributors of flat-rolled carbon steel, announced the appointment of Pam Heglund to President. Heglund will be the first female president of a steel service center of this size. Heglund was Mill Steel’s first intern, starting at the company in 2000 and serving the past five years as […]
A week ago Steel Market Update reported that three domestic steel mills would file an antidumping suit against a number of foreign countries who have been exporting cut-to-length (CTL) plate to the United States. On Friday the three mills identified in our earlier reporting filed their petition. A trade petition against 12 countries was filed […]
Each month the Commerce Department issues its Construction Put in Place (CPIP) data, usually on the first working day covering activity two months earlier. February data was released on Friday April 1st. Construction Put in Place is based on spending work as it occurs, estimated for a given month from a sample of projects. In […]
A new rule from OSHA takes aim at exposure to crystalline silica. Crystalline silica exposure is a serious health hazard affecting approximately 2 million construction workers and 300,000 general industry workers in the U.S., according to estimates by the Occupational Safety and Health Administration. Crystalline silica exposure occurs when construction workers drill, cut, crush, or […]
NLMK USA was the first mill to raise prices, going up $40 per ton. I am hearing comments from both sides on whether the price increases are a good or bad thing. My personal opinion is prices got a little “over-done” last year and dropped too low. A hot rolled number closer to $500 may […]
Tata Steel’s exit from the United Kingdom may be a precursor to a merger with Thyssenkrupp. Wall Street Journal reports Tata and Thyssenkrupp have been in high-level talks for more than a year about combining their European steel operations. Whether the two companies are considering a buyout or forming a joint venture is unclear at […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 34. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
The Bureau of Economic Analysis (BEA) released the third estimate of Q4 2015 Annual Revision of the National Income and Product Accounts on Friday. The annualized growth rate in the third estimate of the fourth quarter was 1.38 percent, down from 1.97 percent, in the third quarter and down from 3.86 percent in Q2. Normally […]
The Bureau of Labor Statistics (BLS) reported on Friday in their analysis of non-farm employment that 215,000 jobs were added in March, down from 245,000 in February but up from 168,000 in January. January and February were revised down by a total of 1,000. An explanation of the BLS report is included at the end […]
Home prices continued to rise in January, according to the S&P/Case-Shiller Home Price Indices. The 20-City Composite gained 5.4 percent in January, up slightly from a 5.3 percent increase in December. The 10-City Composite year over year over year gain was 5.1 percent. “Home prices continue to climb at more than twice the rate of […]